+ Post new Ad
1-2-3 blocks 2 pair with boxes. Used, US $8.00 – Picture 0
1-2-3 blocks 2 pair with boxes. Used, US $8.00 – Picture 1
1-2-3 blocks 2 pair with boxes. Used, US $8.00 – Picture 2
1-2-3 blocks 2 pair with boxes. Used, US $8.00 – Picture 3
1-2-3 blocks 2 pair with boxes. Used, US $8.00 – Picture 4
1-2-3 blocks 2 pair with boxes. Used, US $8.00 – Picture 0
1-2-3 blocks 2 pair with boxes. Used, US $8.00 – Picture 1
1-2-3 blocks 2 pair with boxes. Used, US $8.00 – Picture 2
1-2-3 blocks 2 pair with boxes. Used, US $8.00 – Picture 3
1-2-3 blocks 2 pair with boxes. Used, US $8.00 – Picture 4

1-2-3 Blocks 2 Pair With Boxes. Used

US $8.00

  • Indianapolis, Indiana, United States
  • Jan 30th
Open on mobile:
QR code
This listing is for two pair of 1-2-3 blocks.  Both sets are made in China and come with a red box.   We will combine shipping on all auctions ending the same day. Please pay for your auction within 3 days. If for some reason you cannot pay for your auction within 3 days please contact us! International Shipping: Import duties, taxes, and charges are NOT INCLUDED in the item price or shipping charges. These charges are the buyer's responsibility.  We will NOT changing labeling on international shipments to say "gift".  
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Country/Region of Manufacture China

Directions

Similar products from Supporting Blocks & Sets

V BLOCK WORKHOLDING TOOL poly or plastic w/ 1/2" bolt holes

V BLOCK WORKHOLDING TOOL poly or plastic w/ 1/2" bolt holes

  • Clatskanie, Oregon, United States
  • Jan 30th
Indexable Cut-Off Blade Block SGTBN 25-5 [1933]

Indexable Cut-Off Blade Block SGTBN 25-5 [1933]

  • Saint Louis, Missouri, United States
  • Jan 30th
NEW MACHINISTS PARALLEL SET – machinist hand tools alignment tool parallels

NEW MACHINISTS PARALLEL SET – machinist hand tools alignment tool parallels

  • Clarks Summit, Pennsylvania, United States
  • Jan 30th
Vee Channel V Block Machinist Tool Surface Grinder Milling Machine Drill Press

Vee Channel V Block Machinist Tool Surface Grinder Milling Machine Drill Press

  • Yorktown, Virginia, United States
  • Jan 30th
Iscar SGTBK 32 - 9 Tool Block Blade Holder

Iscar SGTBK 32 - 9 Tool Block Blade Holder

  • Houston, Texas, United States
  • Jan 30th
Brown and Sharpe Magnetic Vee Block

Brown and Sharpe Magnetic Vee Block

  • Hoschton, Georgia, United States
  • Jan 30th
Brown and Sharpe Permanent Magnet Block

Brown and Sharpe Permanent Magnet Block

  • Hoschton, Georgia, United States
  • Jan 30th
Brown & Sharpe 599-750-25 Angle Block L3.75 W1.75 H2" Adjustable

Brown & Sharpe 599-750-25 Angle Block L3.75 W1.75 H2" Adjustable

  • Middlebury, Indiana, United States
  • Jan 30th
Precision Ground Magnetic Parallels and V-blocks for Surface Grinder

Precision Ground Magnetic Parallels and V-blocks for Surface Grinder

  • Brighton, Colorado, United States
  • Jan 30th
Sine Block Inspection Measurement Base App. 1.5 x 6 inches

Sine Block Inspection Measurement Base App. 1.5 x 6 inches

  • Temperance, Michigan, United States
  • Jan 30th
F10638 10 PCS Phone Module AMP Voice Module Information Module

F10638 10 PCS Phone Module AMP Voice Module Information Module

  • ???, ???, China
  • Jan 30th
TOOL MAKERS V BLOCKS

TOOL MAKERS V BLOCKS

  • Meridian, Idaho, United States
  • Jan 30th
TOOL MAKERS V BLOCKS AND CLAMPS NEW IN WOOD BOX

TOOL MAKERS V BLOCKS AND CLAMPS NEW IN WOOD BOX

  • Meridian, Idaho, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Gages Pins Cutters Parts Etc

MACHINIST LATHE MILL Lot of Machinist Gages Pins Cutters Parts Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Gages Cutters Chuck Bits Parts Etc

MACHINIST LATHE MILL Lot of Machinist Gages Cutters Chuck Bits Parts Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
2 Parallels Machinist 9" & OTHER MACHINIST BLOCKS WHITNEY PRATT 18" H118L & F58L

2 Parallels Machinist 9" & OTHER MACHINIST BLOCKS WHITNEY PRATT 18" H118L & F58L

  • Naperville, Illinois, United States
  • Jan 30th
LARGER 4 1/2 POUND MACHINIST V-BLOCK AND CLAMP

LARGER 4 1/2 POUND MACHINIST V-BLOCK AND CLAMP

  • Rockwood, Maine, United States
  • Jan 30th
V-Block, 6" x 6" x 6", 1-1/4 to 4-3/8" V Capacity, 90° V Angle

V-Block, 6" x 6" x 6", 1-1/4 to 4-3/8" V Capacity, 90° V Angle

  • Saint Louis, Missouri, United States
  • Jan 30th
L.S.STARRETT #278 V-BLOCK SET W/CLAMPS ***SUPERB***!

L.S.STARRETT #278 V-BLOCK SET W/CLAMPS ***SUPERB***!

  • Highland, New York, United States
  • Jan 30th
1-2-3 Setup Blocks, Matched Pair, 23 Holes (5 Tapped), .0001" Squareness (52C)

1-2-3 Setup Blocks, Matched Pair, 23 Holes (5 Tapped), .0001" Squareness (52C)

  • Saint Louis, Missouri, United States
  • Jan 30th

People who viewed this item also vieved

Bridgeport B-3 Collet (1)

Bridgeport B-3 Collet (1)

  • Ashville, Pennsylvania, United States
  • Jun 10th
6 NOS Hardinge 2H Round Collets 7/32, 1/4, 3/8, 7/16, (2) 5/8"

6 NOS Hardinge 2H Round Collets 7/32, 1/4, 3/8, 7/16, (2) 5/8"

  • Coldwater, Ohio, United States
  • Jun 10th
Vintage Collet Rack w/ 3-AT Collets, Nose Piece, Spindle Cap from Atlas Lathe

Vintage Collet Rack w/ 3-AT Collets, Nose Piece, Spindle Cap from Atlas Lathe

  • Rocky Point, New York, United States
  • Jun 11th
(3) THREE VLIER TH106 ADJUSTABLE TORQUE HANDLES 1/2-13

(3) THREE VLIER TH106 ADJUSTABLE TORQUE HANDLES 1/2-13

  • Hollister, California, United States
  • Jun 24th
Machinist Metalworking Adjustable Tilt Table

Machinist Metalworking Adjustable Tilt Table

  • Suffern, New York, United States
  • Jun 24th
Cast Iron Angle Plate

Cast Iron Angle Plate

  • Dayton, Ohio, United States
  • Jun 25th
Billings Heavy Service 1-1/2" C-Clamp

Billings Heavy Service 1-1/2" C-Clamp

  • Greenville, Pennsylvania, United States
  • May 24th
MERRILL BROTHERS 1 TON CLAMP WITH RING

MERRILL BROTHERS 1 TON CLAMP WITH RING

  • Goffstown, New Hampshire, United States
  • May 24th
Mill clamp assortment, hold down, heel clamp, step block, 30+ pcs., heavy duty

Mill clamp assortment, hold down, heel clamp, step block, 30+ pcs., heavy duty

  • Minneapolis, Minnesota, United States
  • May 24th
BRISTOL ERICKSON COLLET EXTENSION r7007

BRISTOL ERICKSON COLLET EXTENSION r7007

  • Wadalba, NSW, Australia
  • May 25th
Set-TRU'Precision Self-Centering Scroll Chuck

Set-TRU'Precision Self-Centering Scroll Chuck

  • Duncan, South Carolina, United States
  • May 25th
Set-TRU'Precision Self-Centering Scroll Chuck - Chuck Size: 8'

Set-TRU'Precision Self-Centering Scroll Chuck - Chuck Size: 8'

  • Duncan, South Carolina, United States
  • May 25th
Intermatic or AR Brown Pneumatic Vise Drill Press Mill Air CNC Vice

Intermatic or AR Brown Pneumatic Vise Drill Press Mill Air CNC Vice

  • Dayton, Ohio, United States
  • May 25th
. Kurt D80-24 A Kurt Vise Handles

. Kurt D80-24 A Kurt Vise Handles

  • Dayton, Ohio, United States
  • May 25th
Vintage Small Machinist Tool Holder, Vise, Unmarked, Slide Bar, Tightens Nicely

Vintage Small Machinist Tool Holder, Vise, Unmarked, Slide Bar, Tightens Nicely

  • Troy, Maine, United States
  • May 25th
Bison-Bial MT#5 Precision Live Lathe Center-.0004 TIR

Bison-Bial MT#5 Precision Live Lathe Center-.0004 TIR

  • Hamden, Connecticut, United States
  • May 27th
Royal changeable-point live center

Royal changeable-point live center

  • Dayton, Ohio, United States
  • May 27th
Heavy Steel 4" Dead Center From Vintage Metal Lathe 1 5/8" & 1 3/8" Diameter

Heavy Steel 4" Dead Center From Vintage Metal Lathe 1 5/8" & 1 3/8" Diameter

  • Troy, Michigan, United States
  • May 27th
80-23 80-24 Kurt Style milling machine vice handle 7/8 hex

80-23 80-24 Kurt Style milling machine vice handle 7/8 hex

  • Middlebury, Indiana, United States
  • Jun 3rd
PRECISION BRAND * ARBOR SHIMS 3/4 X 1-1/8 X .008 BAG OF 20 NIB

PRECISION BRAND * ARBOR SHIMS 3/4 X 1-1/8 X .008 BAG OF 20 NIB

  • Sunman, Indiana, United States
  • Jun 3rd
OKO Magnets, 2-7/8" Square Magnetic on-off V-Block Machinist Workholding

OKO Magnets, 2-7/8" Square Magnetic on-off V-Block Machinist Workholding

  • Pierson, Michigan, United States
  • Jun 3rd
8" Bison Adjustable Tailstock NEW

8" Bison Adjustable Tailstock NEW

  • Carrollton, Ohio, United States
  • Jun 6th
TROYKE 10" CNC ROTARY TABLE

TROYKE 10" CNC ROTARY TABLE

  • Santa Paula, California, United States
  • Jun 6th
EIMELDINGEN 48" ROUND PLATE, 30" ROUND TABLE, 8" T/SLOT, CNC ROTARY TABLE

EIMELDINGEN 48" ROUND PLATE, 30" ROUND TABLE, 8" T/SLOT, CNC ROTARY TABLE

  • Dallas, Texas, United States
  • Jun 6th
Penny Black Creative Dies-Christmas Kiss

Penny Black Creative Dies-Christmas Kiss

  • Hickory Hills, Illinois, United States
  • Jun 10th
AdornIt ArtPlay Coloring Book-This 'n That

AdornIt ArtPlay Coloring Book-This 'n That

  • Hickory Hills, Illinois, United States
  • Jun 10th
Creativity Essentials A5 Clear Stamps-Geometric Neon

Creativity Essentials A5 Clear Stamps-Geometric Neon

  • Hickory Hills, Illinois, United States
  • Jun 10th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies