+ Post new Ad
1.5 HP 1Ph Unisaw Motor, US $229.00 – Picture 0
1.5 HP 1Ph Unisaw Motor, US $229.00 – Picture 1
1.5 HP 1Ph Unisaw Motor, US $229.00 – Picture 2
1.5 HP 1Ph Unisaw Motor, US $229.00 – Picture 0
1.5 HP 1Ph Unisaw Motor, US $229.00 – Picture 1
1.5 HP 1Ph Unisaw Motor, US $229.00 – Picture 2

1.5 Hp 1ph Unisaw Motor

US $229.00

  • Rochester, Vermont, United States
  • Jan 30th
Open on mobile:
QR code
Nice used Unisaw motor.  I have had it in my cabinet shop for about 9 years and it has run smooth and strong the whole time.  My work has moved toward continuous ripping of thick hardwoods so I bought a 3Hp motor and swapped them out.  The 1.5Hp is great for all sorts of general table saw use and this is a perfect motor to use on the restoration of an older saw that has seen some abuse.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Delta

Directions

Similar products from Professional Sawing Equipment

Radial Saw, Dewalt model GE

Radial Saw, Dewalt model GE

  • Canton, Ohio, United States
  • Jan 30th
DELTA / ROCKWELL RT-40 16" TILTING ARBOR TABLE SAW

DELTA / ROCKWELL RT-40 16" TILTING ARBOR TABLE SAW

  • United States
  • Jan 30th
Bandsaw Guide Jaws for Carter CP10

Bandsaw Guide Jaws for Carter CP10

  • Melrose, Wisconsin, United States
  • Jan 30th
Midwest Automation CS 5236 Countertop Saw, 1999, Lazer, Stop, Infeed/Outfeed 1PH

Midwest Automation CS 5236 Countertop Saw, 1999, Lazer, Stop, Infeed/Outfeed 1PH

  • Sheboygan, Wisconsin, United States
  • Jan 30th
Delta RT40 Table Saw w/ Biesemeyer Fence

Delta RT40 Table Saw w/ Biesemeyer Fence

  • Dayton, Ohio, United States
  • Jan 30th
Selco WNT-200 Rear Load Panel/Beam Saw

Selco WNT-200 Rear Load Panel/Beam Saw

  • Colorado Springs, Colorado, United States
  • Jan 30th
Powermatic 66 10" Woodworking Table Saw

Powermatic 66 10" Woodworking Table Saw

  • Fayetteville, Tennessee, United States
  • Jan 30th
Vintage!! Dewalt Radial Arm Saw

Vintage!! Dewalt Radial Arm Saw

  • San Bernardino, California, United States
  • Jan 30th
DoAll Z-2013 Vertical Band Saw, #944989

DoAll Z-2013 Vertical Band Saw, #944989

  • Elk River, Minnesota, United States
  • Jan 30th
ALUMINUM DOUBLE HEAD DISK SAW BRAND ELVASA, MODEL AL110

ALUMINUM DOUBLE HEAD DISK SAW BRAND ELVASA, MODEL AL110

  • Miami, Florida, United States
  • Jan 30th
Dremel 7.5 Amp 4" Ultra-Saw Tool Kit US40-01 NEW

Dremel 7.5 Amp 4" Ultra-Saw Tool Kit US40-01 NEW

  • El Mirage, Arizona, United States
  • Jan 30th
RIDGID POWER TOOLS BS14002 VERTICAL BAND SAW 3/4 HP 93-1/2" BLADE LENGTH

RIDGID POWER TOOLS BS14002 VERTICAL BAND SAW 3/4 HP 93-1/2" BLADE LENGTH

  • La Puente, California, United States
  • Jan 30th
16" DeWalt radial arm saw

16" DeWalt radial arm saw

  • Staten Island, New York, United States
  • Jan 30th
Portable sawmill

Portable sawmill

  • Oxford, Mississippi, United States
  • Jan 30th
Laguna Tools V-Way Horizontal Mortiser Model MMORT3000-0250

Laguna Tools V-Way Horizontal Mortiser Model MMORT3000-0250

  • Mount Vernon, Washington, United States
  • Jan 30th
TAKEKAWA "RB-25" STRAIGHT LINE RIP-SAW MODEL RB 25A (OC31)

TAKEKAWA "RB-25" STRAIGHT LINE RIP-SAW MODEL RB 25A (OC31)

  • Anaheim, California, United States
  • Jan 30th
Resaw bandsaw Danckaert 32in wood band saw for resawing

Resaw bandsaw Danckaert 32in wood band saw for resawing

  • DeKalb, Illinois, United States
  • Jan 30th
Altendorf F45 sliding saw In fair condition Made in Germany

Altendorf F45 sliding saw In fair condition Made in Germany

  • Oregon, Ohio, United States
  • Jan 30th
1981 ROCKWELL 10" CONTRACTOR TABLE SAW REPLACEMENT PARTS MANUAL FOR MODEL 34-440

1981 ROCKWELL 10" CONTRACTOR TABLE SAW REPLACEMENT PARTS MANUAL FOR MODEL 34-440

  • Bremen, Indiana, United States
  • Jan 30th
Delta 10 Inch Table Saw (Inv.10074)

Delta 10 Inch Table Saw (Inv.10074)

  • Portland, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

Norton 3x6" Hook & Sand Vacuum Hole Discs P150 Grit For Sanding Surfaces

Norton 3x6" Hook & Sand Vacuum Hole Discs P150 Grit For Sanding Surfaces

  • Charlotte, North Carolina, United States
  • May 24th
Dynafile sander 20,000

Dynafile sander 20,000

  • Yonkers, New York, United States
  • May 24th
Dynabrade 18100 Dynafile II Portable Belt Sander With Extra belts NEW Lists $500

Dynabrade 18100 Dynafile II Portable Belt Sander With Extra belts NEW Lists $500

  • Martinsville, Indiana, United States
  • May 24th
Walker Turner- 20" Drill Press- Return Spring and Housing

Walker Turner- 20" Drill Press- Return Spring and Housing

  • Grand Rapids, Michigan, United States
  • May 25th
Walker Turner 20" Drill Press - Feed Pinion - Part# 11-2

Walker Turner 20" Drill Press - Feed Pinion - Part# 11-2

  • Grand Rapids, Michigan, United States
  • May 25th
Walker Turner Drill Press Motor

Walker Turner Drill Press Motor

  • Long Beach, California, United States
  • May 25th
THERMWOOD 5 AXIS>>FIVE AXIS<< CNC ROUTER MODEL NO. 5X10P

THERMWOOD 5 AXIS>>FIVE AXIS<< CNC ROUTER MODEL NO. 5X10P

  • Fort Worth, Texas, United States
  • May 29th
3d stl Model 30pcs for CNC Router Artcam

3d stl Model 30pcs for CNC Router Artcam

  • St.Petersburg, default, Russian Federation
  • May 29th
8 PCS 3d Models STL for CNC Router Engraver Machine Relief Artcam Clock aspire

8 PCS 3d Models STL for CNC Router Engraver Machine Relief Artcam Clock aspire

  • Великий Устюг, Вологодская область, Russian Federation
  • May 29th
NEW DELTA 1/2 inch SPINDLE WOOD SHAPER 43 - 802 910285

NEW DELTA 1/2 inch SPINDLE WOOD SHAPER 43 - 802 910285

  • Mahwah, New Jersey, United States
  • Jun 3rd
Lot of parts COLLET / TEMPLET GUIDE / NUTS for Bosh ROUTER or DIE GRINDER

Lot of parts COLLET / TEMPLET GUIDE / NUTS for Bosh ROUTER or DIE GRINDER

  • Mahwah, New Jersey, United States
  • Jun 3rd
6289147 Automatic Gear Lever for Powermatic Woodworking Machines

6289147 Automatic Gear Lever for Powermatic Woodworking Machines

  • Athens, Georgia, United States
  • Jun 3rd
Vintage Powr Kraft Molding Head - Montgomery Ward # 84-2275 New Old Stock

Vintage Powr Kraft Molding Head - Montgomery Ward # 84-2275 New Old Stock

  • Gilbert, Arizona, United States
  • Jun 9th
NOVA 48111 1-Inch 8TPI Direct Thread Precision Midi Wood Turning Chuck

NOVA 48111 1-Inch 8TPI Direct Thread Precision Midi Wood Turning Chuck

  • Oneonta, Alabama, United States
  • Jun 9th
NOS Craftsman Lathe 6 Inch Face Plate NIB

NOS Craftsman Lathe 6 Inch Face Plate NIB

  • Wilsey, Kansas, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies