1 WILMORE DC-DC CONVERTER MODEL 1620-74-13-7.5 locomotives and other rail train, US $155.00 – Picture 0

1 WILMORE DC-DC CONVERTER MODEL 1620-74-13-7.5 locomotives and other rail train, US $155.00 – Picture 1

1 WILMORE DC-DC CONVERTER MODEL 1620-74-13-7.5 locomotives and other rail train, US $155.00 – Picture 2

1 WILMORE DC-DC CONVERTER MODEL 1620-74-13-7.5 locomotives and other rail train, US $155.00 – Picture 3

1 WILMORE DC-DC CONVERTER MODEL 1620-74-13-7.5 locomotives and other rail train, US $155.00 – Picture 4

1 WILMORE DC-DC CONVERTER MODEL 1620-74-13-7.5 locomotives and other rail train, US $155.00 – Picture 5

1 WILMORE DC-DC CONVERTER MODEL 1620-74-13-7.5 locomotives and other rail train, US $155.00 – Picture 6

1 WILMORE DC-DC CONVERTER MODEL 1620-74-13-7.5 locomotives and other rail train, US $155.00 – Picture 7

1 Wilmore Dc-dc Converter Model 1620-74-13-7.5 Locomotives And Other Rail Train

US $155.00

QUEBEC, Canada
Mar 26th

Open on mobile:
QR code

1 WILMORE DC-DC CONVERTER MODEL 1620-74-13-7.5 Product Specifications Brand: WILMORE Condition: USED Model: 1620-74-13-7.5 Input Voltage: 74 Type: ouput 13 vdc Shipping Weight: Category: WILMORE DC-DC Additional Notes: REMOVED FROM WORKING CONTROLER ITEM 11 74-V AND 36-V INPUT DC-DC CONVERTERS Model 1620-74-13-15 Model 1620-74-13-7.5 Series 1620 dc-to-dc converters provide an isolated, regulated and well-fi ltered dc output voltage from 74-Vdc and 36-Vdc electrical systems on locomotives and other rail vehicles. A fi eld-proven input-transient protection system and extremely rugged mechanical construction make them especially suited for powering voice-data radios and other sensitive electronic loads in the harsh railroad vehicle environment. Models with outputs of 13.6-Vdc and 24-Vdc are described in this bulletin. Technical information on other versions with output voltages in the range of 5 to 28 volts is available upon request. • FOR LOCOMOTIVE/RAILTRANSIT APPLICATIONS • 200-WATT AND 100-WATT MODELS • INPUT SURGE/TRANSIENT PROTECTION • INPUT-TO-OUTPUT ISOLATION • -40°C TO 70°C TEMPERATURE RANGE • CONVECTION COOLED • EXTREMELY RUGGED AND RELIABLE † Depending upon the ambient temperature, a duty-cycle rating may apply. Table 1 Nominal Input Voltage (Vdc) Nominal Output Voltage (Vdc) Maximum† Output Current/Power Model Number 36 13.6 7.5A/100W 1620-36-13-7.5 13.6 15A/200W 1620-36-13-15 24 4A/100W 1620-36-24-4 24 8A/200W 1620-36-24-8 74 13.6 7.5A/100W 1620-74-13-7.5 13.6 15A/200W 1620-74-13-15 24 4A/100W 1620-74-24-4 24 8A/200W 1620-74-24- WILMORE ELECTRONICS COMPANY, INC. P. O. Box 1329, Hillsborough, N. C. 27278 • Telephone (919) 732-9351 • FAX (919) 732-9359 www.wilmoreelectronics.com Isolation Isolation capable of passing a 2,500-Vdc stress test is provided between the input and output and between the input and chassis. Transient-Withstand Capability Transient input-voltage surges up to 7,000 volts peak, per IEC 571, Paragraphs 3.5 and 5.4, will not harm the converter. The abrupt discharge of a 16-µF capacitor charged to 2,500 Vdc will not damage the converter or interfere with its operation when applied from line to line across the input, or from either input line to chassis. Installation Good installation practice for mobile electronic equipment dictates that input fuses or circuit breakers should be located at the power-source end of the cables feeding the converter. For this reason, no protection devices are built inside the Model 1620 to protect against fault conditions at the input to the converter. Instead, a 20-A fuse or circuit breaker should be installed near the dc-input source in series with the positive (+) input line when this source is negativegrounded or not grounded (fl oating); or when the dc source is positive-grounded, installed in series with the negative (-) input line. Ambient Temperature Range -40°C to 70°C (-40°F to 158°F) (Convection Cooling) Mechanical Size: Dimensions given in inches (mm). For 100-watt models: 1.9 (48) high x 7.0 (177) wide x 9.0 (228)) deep (excluding fl anges and terminal block). For 200-watt models: 3.0 (76) high x 7.0 (177) wide x 9.0 (228)) deep (excluding fl anges and terminal block). Mounting fl ange on base is 0.5 (13) wide (each side). Terminal block extends 0.5 (13) from front panel Weight: For 100-watt models: 3.5 pounds (1.6 kg) For 200-watt models: 5 pounds (2.3 kg) Mounting: Mounting fl ange on base accepts four #10 screws. Hole pattern is 6.6 (168) front-to-back and 7.6 (193) wide. Input/Output Connections The input, output and chassis ground connections are made via heavy-duty barrier-strip terminal blocks. The terminal-block screws accept lugs for use with #6 hardware. Additional Information For additional information about these and other Wilmore Electronics Company dc-to-dc converters, dc-to-ac inverters and uninterruptible power systems, please contact our Sales Department at (919) 732-9351 or FAX (919) 732-9359. Information provided in this technical bulletin is subject to change without notice.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	wilmore
Country/Region of Manufacture	United States
Model	1620-74-13-7.5