+ Post new Ad
12 Pcs Techniks ER 25 #6 to 5/8" TC Rigid CNC Tap Collet Set, US $180 – Picture 0
12 Pcs Techniks ER 25 #6 to 5/8" TC Rigid CNC Tap Collet Set, US $180 – Picture 0

12 Pcs Techniks Er 25 #6 To 5/8" Tc Rigid Cnc Tap Collet Set

US $180

  • Hamden, Connecticut, United States
  • Jan 30th
Open on mobile:
QR code
12 Pcs. Techniks Brand New ER 25 1/8" or # 6 to 5/8" + 1/8" NPT TC Rigid Tap Collet Set Features Locking feature prevents spinning the tap Replace expensive tap holders Metric sizes available upon request Note Use with any standard ER, RD, DR, ESX or BR collet chucks for all rigid tapping jobs. Special design locks flat-sided tap shanks into collet preventing the tap from spinning inside the collet. For best results replace standard nut with a “Power Coat” nut to increase clamping pressure up to 75%. ER 25 TC Rigid Tap Collets Part#
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Techniks

Directions

Similar products from Metalworking Collets

Erickson Nmtb # 40

Erickson Nmtb # 40

  • Dania, Florida, United States
  • Jan 30th
Nikken Collet Holder Bt40- Dw3-105 (DA100)

Nikken Collet Holder Bt40- Dw3-105 (DA100)

  • Dania, Florida, United States
  • Jan 30th
Erickson Nmtb # 40 Lot Of 3

Erickson Nmtb # 40 Lot Of 3

  • Dania, Florida, United States
  • Jan 30th
NULINE 5C Round Collet 1" Steel <1893>

NULINE 5C Round Collet 1" Steel <1893>

  • Saint Louis, Missouri, United States
  • Jan 30th
AT3 Collet Assortment

AT3 Collet Assortment

  • Garden City, Idaho, United States
  • Jan 30th
ASSORTED LOT OF TG75 COLLETS KENNAMETAL ERICKSON,TG75 ASSORTED COLLETS QTY 30

ASSORTED LOT OF TG75 COLLETS KENNAMETAL ERICKSON,TG75 ASSORTED COLLETS QTY 30

  • Wethersfield, Connecticut, United States
  • Jan 30th
Pratt and Whitney 2A Jig Bore

Pratt and Whitney 2A Jig Bore

  • Manchester, Connecticut, United States
  • Jan 30th
TECHNIKS ER20 1/4,1/2,13/32 STEEL SEALED COLLET,ER20 1/2 RIGID TAPQTY 2

TECHNIKS ER20 1/4,1/2,13/32 STEEL SEALED COLLET,ER20 1/2 RIGID TAPQTY 2

  • Wethersfield, Connecticut, United States
  • Jan 30th
14 Pcs. Techniks ER 25 3mm to 16mm x 1mm Steel Sealed Coolant CNC Collet Set

14 Pcs. Techniks ER 25 3mm to 16mm x 1mm Steel Sealed Coolant CNC Collet Set

  • Hamden, Connecticut, United States
  • Jan 30th
18 Pc Techniks ER32 3mm to 20mm x 1mm Steel Sealed Coolant CNC Metric Collet Set

18 Pc Techniks ER32 3mm to 20mm x 1mm Steel Sealed Coolant CNC Metric Collet Set

  • Hamden, Connecticut, United States
  • Jan 30th
15 Pc Techniks ER 32 #8-13/16&#034;+1/8,1/4 NPT Quick-Change Rigid CNC Tap Collet Set

15 Pc Techniks ER 32 #8-13/16"+1/8,1/4 NPT Quick-Change Rigid CNC Tap Collet Set

  • Hamden, Connecticut, United States
  • Jan 30th
5 Pcs. Techniks DNA32 Ultra-Accurate .0002&#034; TIR Collets

5 Pcs. Techniks DNA32 Ultra-Accurate .0002" TIR Collets

  • Hamden, Connecticut, United States
  • Jan 30th
11 Pcs. Techniks FT-132 #8 to 5/8&#034; + 1/8&#034; NPT ER Floating CNC Tap Collet Set

11 Pcs. Techniks FT-132 #8 to 5/8" + 1/8" NPT ER Floating CNC Tap Collet Set

  • Hamden, Connecticut, United States
  • Jan 30th
SOUTHWICK AND MEISTER TF37 .587 INCH ROUND COLLET, TF37 COLLET 14.9MM

SOUTHWICK AND MEISTER TF37 .587 INCH ROUND COLLET, TF37 COLLET 14.9MM

  • Wethersfield, Connecticut, United States
  • Jan 30th
UP TO 3 NEW 45/64&#034; PARLEC 150PG SINGLE ANGLE COLLETS 150PG-0703

UP TO 3 NEW 45/64" PARLEC 150PG SINGLE ANGLE COLLETS 150PG-0703

  • Rochester, New York, United States
  • Jan 30th
UP TO 2 NEW 43/64&#034; LYNDEX 150PG SINGLE ANGLE COLLETS 150-043

UP TO 2 NEW 43/64" LYNDEX 150PG SINGLE ANGLE COLLETS 150-043

  • Rochester, New York, United States
  • Jan 30th
NEW 19/32&#034; PARLEC 150PG SINGLE ANGLE COLLETS 150PG-0593

NEW 19/32" PARLEC 150PG SINGLE ANGLE COLLETS 150PG-0593

  • Rochester, New York, United States
  • Jan 30th
UP TO 4 NEW 13/16&#034; PARLEC 150PG SINGLE ANGLE COLLETS 150PG-0812

UP TO 4 NEW 13/16" PARLEC 150PG SINGLE ANGLE COLLETS 150PG-0812

  • Rochester, New York, United States
  • Jan 30th
UP TO 3 NEW 31/32&#034; PARLEC 150PG SINGLE ANGLE COLLETS 150PG-0968

UP TO 3 NEW 31/32" PARLEC 150PG SINGLE ANGLE COLLETS 150PG-0968

  • Rochester, New York, United States
  • Jan 30th
Hardinge TF37 .2158 INCH ROUND COLLET, TF37 COLLET 5.5mm collet

Hardinge TF37 .2158 INCH ROUND COLLET, TF37 COLLET 5.5mm collet

  • Wethersfield, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

Import Right Angle Iron 5-1/2&#034; x 7&#034; x 10&#034; Semi-Steel Machine 70146063 5Aa*

Import Right Angle Iron 5-1/2" x 7" x 10" Semi-Steel Machine 70146063 5Aa*

  • Saint Louis, Missouri, United States
  • May 26th
Large Horton Angle Sine Plate Table Fixture Tapped Breadboard For Grinder Mill

Large Horton Angle Sine Plate Table Fixture Tapped Breadboard For Grinder Mill

  • Minnetonka, Minnesota, United States
  • May 26th
ACCURITE GRANITE RIGHT ANGLE BLOCK 6X6X6 STK 9286

ACCURITE GRANITE RIGHT ANGLE BLOCK 6X6X6 STK 9286

  • Wadley, Alabama, United States
  • May 27th
MACHINIST TOOLS LATHE MILL Machinist Lot of Smalll Set Up Clamps for Hold Down

MACHINIST TOOLS LATHE MILL Machinist Lot of Smalll Set Up Clamps for Hold Down

  • Morris Plains, New Jersey, United States
  • May 28th
Armstrong No.4 Heavy Duty Clamp Chicago USA

Armstrong No.4 Heavy Duty Clamp Chicago USA

  • Salt Lake City, Utah, United States
  • May 28th
J.H. Williams &amp; CO. Drop Forged No.2 Welders VULCAN HEAVY SERVICE C-CLAMP

J.H. Williams & CO. Drop Forged No.2 Welders VULCAN HEAVY SERVICE C-CLAMP

  • Alamo, California, United States
  • May 28th
Chip Cover for Strong N-208 / Kitagawa B-208 Hydraulic Chucks

Chip Cover for Strong N-208 / Kitagawa B-208 Hydraulic Chucks

  • Ontario, California, United States
  • May 29th
H&amp;R Mfg Hard Jaws #82-RJ for CNC 10 inch Lathe Chuck

H&R Mfg Hard Jaws #82-RJ for CNC 10 inch Lathe Chuck

  • Brunswick, Georgia, United States
  • May 29th
6&#034; ( 6 inch) 6 Jaw Self Centering Lathe Chuck (Accuracy 0.002&#034;) Prime Semi Steel

6" ( 6 inch) 6 Jaw Self Centering Lathe Chuck (Accuracy 0.002") Prime Semi Steel

  • Diamond Bar, California, United States
  • May 29th
live center no. 6 -40 ready tool #11 brown and sharp shank x

live center no. 6 -40 ready tool #11 brown and sharp shank x

  • Plantsville, Connecticut, United States
  • May 29th
5MT LATHE DEAD CENTER STK 9015

5MT LATHE DEAD CENTER STK 9015

  • Wadley, Alabama, United States
  • May 29th
EAGLE STARS LIVE CENTER TAPER #5 ST5-306

EAGLE STARS LIVE CENTER TAPER #5 ST5-306

  • Bristol, Connecticut, United States
  • May 29th
Milling machine, shaper vise handle

Milling machine, shaper vise handle

  • Camarillo, California, United States
  • May 30th
Vintage SMART&#039;S 66 Bench Vise ~ 180 degree Swivel ~ 2-1/2&#034; jaws

Vintage SMART'S 66 Bench Vise ~ 180 degree Swivel ~ 2-1/2" jaws

  • Saint Clair Shores, Michigan, United States
  • May 30th
VINTAGE WILTON No. 3 BULLET VISE FOR THE MACHINIST

VINTAGE WILTON No. 3 BULLET VISE FOR THE MACHINIST

  • Yuma, Arizona, United States
  • May 30th
18&#034; x 46&#034; Cast Iron Welding / Layout Table, Off Matsuura MC-800VDC VMC, 1988

18" x 46" Cast Iron Welding / Layout Table, Off Matsuura MC-800VDC VMC, 1988

  • Grand Rapids, Michigan, United States
  • Jun 6th
Rotary Electrical Company Magnet (Inv.32796)

Rotary Electrical Company Magnet (Inv.32796)

  • Portland, Connecticut, United States
  • Jun 6th
Fanuc Robotics MO-4467-400-010 Small Pad

Fanuc Robotics MO-4467-400-010 Small Pad

  • Peoria, Illinois, United States
  • Jun 6th
V Block, Machinist V Block, Made by Starrett #278, 1.5 in L x 1.25 H x 1.25W

V Block, Machinist V Block, Made by Starrett #278, 1.5 in L x 1.25 H x 1.25W

  • Gilbert, Arizona, United States
  • Jun 9th
V Block, Machinist V Block Made by Toolmaker 2 bs 10 oz 2.5 in L x 2 H x 2.75 W

V Block, Machinist V Block Made by Toolmaker 2 bs 10 oz 2.5 in L x 2 H x 2.75 W

  • Gilbert, Arizona, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL Machinist Lot of Machined Parallel Blocks for Set Up

MACHINIST TOOLS LATHE MILL Machinist Lot of Machined Parallel Blocks for Set Up

  • Morris Plains, New Jersey, United States
  • Jun 9th
Used Haas TR-160 Trunnion CNC Brushless Rotary Table Indexer Full 4th 5th Axis

Used Haas TR-160 Trunnion CNC Brushless Rotary Table Indexer Full 4th 5th Axis

  • Schaumburg, Illinois, United States
  • Jun 9th
Dividing Head 24” Swing Vinco Subtable Brown &amp; Sharpe Magnetic Chuck

Dividing Head 24” Swing Vinco Subtable Brown & Sharpe Magnetic Chuck

  • Euclid, Ohio, United States
  • Jun 9th
CINCINNATI Dividing Head 13” Maximum Swing with Dividing Plates Center

CINCINNATI Dividing Head 13” Maximum Swing with Dividing Plates Center

  • Euclid, Ohio, United States
  • Jun 9th
Liquitex Basics Acrylic Paint 250ml-Phthalocyanine Blue

Liquitex Basics Acrylic Paint 250ml-Phthalocyanine Blue

  • Hickory Hills, Illinois, United States
  • Jun 13th
Young Bros. Young Bros 07361 36 Piece Machine Made Stamp Combination Letter and

Young Bros. Young Bros 07361 36 Piece Machine Made Stamp Combination Letter and

  • USA, United States
  • Jun 13th
Young Bros. Young Bros 03363 36 Piece Heavy Duty Stamp Combination Letter and

Young Bros. Young Bros 03363 36 Piece Heavy Duty Stamp Combination Letter and

  • USA, United States
  • Jun 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies