+ Post new Ad
12 RPM 6-12V Heavy Duty Planetary Gearmotor w/ Metal Gears (721:1 ratio), US $39.99 – Picture 0
12 RPM 6-12V Heavy Duty Planetary Gearmotor w/ Metal Gears (721:1 ratio), US $39.99 – Picture 0

12 Rpm 6-12v Heavy Duty Planetary Gearmotor W/ Metal Gears (721:1 Ratio)

US $39.99

  • Winfield, Kansas, United States
  • Jan 29th
Open on mobile:
QR code
HEAVY DUTY PLANETARY GEARMOTOR  8,110* oz-in  @ 12V     12 RPM @ 12V Dual Ball Bearings + Full Metal Gears!   Operating Specifications: Operating Voltage Range: 6~12VDC Rated Voltage: 12VDC Rated Load: 21 kgf-cm (291.6 oz-in) Operating Temperature: -10 ~ +60°C Max No-Load Current: 0.54A No-Load Speed: 12 RPM Min. Stall Torque: 584 kgf-cm (8110.2 oz-in) Max. Stall Current: 20A @ 12VDC Dielectric Strength: 250 VAC Motor Brush Type: Graphite Output Power at Max. Efficieny: 9W Gear Type: Planetary Gear Ratio: 721:1 Bearing Type: Dual Ball Bearing Shaft size: 6mm (0.236”) Net Weight: 380g (13.4oz) Stall Torque is the torque which is produced by a motor when the output rotational speed is zero, it may also mean the torque load that causes the output rotational speed of a motor to become zero - ie to cause stalling. Electric motors continue to provide torque when stalled. However, electric motors left in a stalled condition are prone to overheating and possible damage since the current flowing is maximum under these conditions. Compatible Accessories shown below (sold separately): Shown with a 6mm to 1/4”shaft coupler. Use our Planetary Gearmotormounts to easily incorporate these motors into your Actobotics project! Click here if you need to operate your gearmotor with a switch.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Actobotics
MPN 638263

Directions

Similar products from Servo & Stepper Motors

ABB GNT009446R0008 MOTOR CONTROLLER D274362

ABB GNT009446R0008 MOTOR CONTROLLER D274362

  • Delta, Ohio, United States
  • Jan 29th
Hurst Gearmotor Model AB P/N (1)6Z539

Hurst Gearmotor Model AB P/N (1)6Z539

  • Chillicothe, Missouri, United States
  • Jan 29th
Mitsubishi PWS1CBL5M-A2-L MR-J3 Power Cable

Mitsubishi PWS1CBL5M-A2-L MR-J3 Power Cable

  • Whitmore Lake, Michigan, United States
  • Jan 29th
NEW REXROTH MSK061C-0600-NN-M1-UP0-NNNN R911317019 6000RPM SERVO MOTOR D274374

NEW REXROTH MSK061C-0600-NN-M1-UP0-NNNN R911317019 6000RPM SERVO MOTOR D274374

  • Delta, Ohio, United States
  • Jan 29th
GE 5CD362MA803A800 KINAMATIC 20HP DC MOTOR CD2512AT

GE 5CD362MA803A800 KINAMATIC 20HP DC MOTOR CD2512AT

  • United States
  • Jan 29th
ORIENTAL MOTOR CO INDUCTION MOTOR WITH HEAD5GK120K/ 5IK40GK-A

ORIENTAL MOTOR CO INDUCTION MOTOR WITH HEAD5GK120K/ 5IK40GK-A

  • Sunman, Indiana, United States
  • Jan 29th
Mitsubishi Melsec HF-KP13 AC Servo Motor 100W

Mitsubishi Melsec HF-KP13 AC Servo Motor 100W

  • Whitmore Lake, Michigan, United States
  • Jan 29th
Mitsubishi Melsec HF-KP43K AC Servo Motor 400W 3 Phase

Mitsubishi Melsec HF-KP43K AC Servo Motor 400W 3 Phase

  • Whitmore Lake, Michigan, United States
  • Jan 29th
RFS Antenna Controler ACU-A20-N

RFS Antenna Controler ACU-A20-N

  • Salt Lake City, Utah, United States
  • Jan 29th
(V27) 1 USED HEIDOLPH 677.211.110300 MOTOR

(V27) 1 USED HEIDOLPH 677.211.110300 MOTOR

  • Cleveland, Ohio, United States
  • Jan 29th
LOT OF 10 NEW Mitsumi stepping motor M35SP-8 P1043013 4 ohm 7.5 degree step

LOT OF 10 NEW Mitsumi stepping motor M35SP-8 P1043013 4 ohm 7.5 degree step

  • Providence, Rhode Island, United States
  • Jan 29th
GOULD, PERMANENT MAGNET SERVO MOTOR, 16-0375-05

GOULD, PERMANENT MAGNET SERVO MOTOR, 16-0375-05

  • Coffeyville, Kansas, United States
  • Jan 29th
Sanyo Denki P50BU8100DCS00, BL Super P5,1000W AC200V Servo Motor

Sanyo Denki P50BU8100DCS00, BL Super P5,1000W AC200V Servo Motor

  • Belleville, Michigan, United States
  • Jan 29th
Mitsubishi MR-H100AN 1kw servo

Mitsubishi MR-H100AN 1kw servo

  • Alamogordo, New Mexico, United States
  • Jan 29th
Lot of 8 DC Stepping Motor Vexta PH544 Tamagawa Seiki TS3211 Minebea 17PS-C037

Lot of 8 DC Stepping Motor Vexta PH544 Tamagawa Seiki TS3211 Minebea 17PS-C037

  • Hayward, California, United States
  • Jan 29th
Mitsubishi MR-H200AN 2kw AC servo

Mitsubishi MR-H200AN 2kw AC servo

  • Alamogordo, New Mexico, United States
  • Jan 29th
Oriental Motor Co. Gear Head GFS5G5

Oriental Motor Co. Gear Head GFS5G5

  • Monroeville, Ohio, United States
  • Jan 29th
New Fincor DC Motor 9302509tn 1/4 HP Base Speed 1725 Gear Arm Volt 90 Free Ship

New Fincor DC Motor 9302509tn 1/4 HP Base Speed 1725 Gear Arm Volt 90 Free Ship

  • United States
  • Jan 29th
Whedco GE fanuc robot servo motor MTR-3N33-H-R-B-N-O 35006530

Whedco GE fanuc robot servo motor MTR-3N33-H-R-B-N-O 35006530

  • Mentor, Ohio, United States
  • Jan 29th
GE fanuc robot servo motor SL Series IC800SLM100N2XE25A

GE fanuc robot servo motor SL Series IC800SLM100N2XE25A

  • Mentor, Ohio, United States
  • Jan 29th

People who viewed this item also vieved

NORGREN CYLINDER M/97080B/80 *NEW IN FACTORY BAG*

NORGREN CYLINDER M/97080B/80 *NEW IN FACTORY BAG*

  • Camarillo, California, United States
  • Mar 29th
FESTO SHORT-STORKE CYLINDER ADVU-25-25-APAS2 *NEW OUT OF BOX*

FESTO SHORT-STORKE CYLINDER ADVU-25-25-APAS2 *NEW OUT OF BOX*

  • Camarillo, California, United States
  • Mar 29th
b. Lot (3) CKD B-80-11 B8011 Booster Cylinder 0.3 to 0.7 MPa NEW UNUSED

b. Lot (3) CKD B-80-11 B8011 Booster Cylinder 0.3 to 0.7 MPa NEW UNUSED

  • Maryville, Tennessee, United States
  • Apr 22nd
Asco 27-476-1-D Solenoid Valve Coil (Inv.33217)

Asco 27-476-1-D Solenoid Valve Coil (Inv.33217)

  • Portland, Connecticut, United States
  • Apr 22nd
Festo Mini Slide SLT-25-100-P-A 25mm Bore 100mm Stroke

Festo Mini Slide SLT-25-100-P-A 25mm Bore 100mm Stroke

  • Flint, Michigan, United States
  • Apr 23rd
TWO SCHNEEBERGER MNN-12-G1 MN12-G1-V1 LINEAR BEARING STAGE SLIDE RAIL 6 11/16"

TWO SCHNEEBERGER MNN-12-G1 MN12-G1-V1 LINEAR BEARING STAGE SLIDE RAIL 6 11/16"

  • Folsom, California, United States
  • Jun 4th
WindyNation 2 Inch 2" Stroke Linear Actuator 12 Volt 12V 225 Pounds lbs Maximum

WindyNation 2 Inch 2" Stroke Linear Actuator 12 Volt 12V 225 Pounds lbs Maximum

  • USA, United States
  • Jun 4th
250mm Ball Screw SFU1605 Ballscrew with Single Ballnut for CNC

250mm Ball Screw SFU1605 Ballscrew with Single Ballnut for CNC

  • Beijing, China
  • Jun 4th
600mm SFU1605 Ball Screw with BK12 BF12 Supports and 6.35x10mm Coupler for CNC

600mm SFU1605 Ball Screw with BK12 BF12 Supports and 6.35x10mm Coupler for CNC

  • Beijing, China
  • Jun 4th
Thomson Industries RapidTrak Actuator Slide TG06K659-M0330

Thomson Industries RapidTrak Actuator Slide TG06K659-M0330

  • Brighton, Massachusetts, United States
  • Jun 4th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies