150W POWERTRON ER SERIES, INDUSTRIAL 3U, DC-DC CONVERTER 12VDC, 12A, US $69.95 – Picture 0

150W POWERTRON ER SERIES, INDUSTRIAL 3U, DC-DC CONVERTER 12VDC, 12A, US $69.95 – Picture 1

150W POWERTRON ER SERIES, INDUSTRIAL 3U, DC-DC CONVERTER 12VDC, 12A, US $69.95 – Picture 2

150W POWERTRON ER SERIES, INDUSTRIAL 3U, DC-DC CONVERTER 12VDC, 12A, US $69.95 – Picture 3

150W POWERTRON ER SERIES, INDUSTRIAL 3U, DC-DC CONVERTER 12VDC, 12A, US $69.95 – Picture 4

150W POWERTRON ER SERIES, INDUSTRIAL 3U, DC-DC CONVERTER 12VDC, 12A, US $69.95 – Picture 5

150w Powertron Er Series, Industrial 3u, Dc-dc Converter 12vdc, 12a

US $69.95

Saint-Jerome, Quebec, Canada
Jan 29th

Open on mobile:
QR code

150W POWERTRON® ER SERIES Input voltage: 67 to 138 volts DC Ouput voltage: 12 volts DC, 12 amps This unit is full working order, What you see in the pictures is exactly what you going to receive. DESCRIPTION Martek Power has been a leader in developing power solutions for transportation. Our rugged power supplies (railway power supplies, automotive power supplies) are EN 50155 compliant and are installed in trains, trucks, and many other vehicular applications throughout the world. ER series is a well established product range designed specifically for use on railway rolling stock. Units are single output versions with input ranges to cover all those typically found in rail applications. Housed in a rugged 3U Eurocassette, the ER series is suitable for both rack and bulkhead mounting and is available with either a heatsink or cold wall mounting plate. The range is fully compliant with the current national and international railway standards and norms. Product Features Input Characteristics Min Max Typical Units/Comments Input Voltage Range 66 137.5 110Vdc, Nominal Hold Up Time: 10 mS to EN50155 Class S2 Efficiency Range: 80 to 90& Output Characteristics Min Max Typical Units/Comments Output Power(Max.): 150 Watts Number of Outputs: 1 Model Main Output Voltage (VDC) Aux 1 Nom. Vout (VDC) Aux 2 Nom. Vout (VDC) Main Output Current (Amps) Aux 1 Output Current (Amps) Aux 2 Output Current (Amps) ER 1200-*/1 12 12 Isolation Characteristics Input to Output: 2.0 kVac Output to Base: 1.0 kVac Input to Base: 1.0 kVac Environmental Characteristics Operating Temperature: -25 to 71°C Deration: No derating over operating temp. Storage Temperature: -40 to +85°C Cooling: Convection Humidity: 95% max. Mechanical Characteristics Dimensions: See Data Sheet mm Mounting: Four slotted M6 holes in heat sink. Cold wall mount options. Applicable Standards EMC RIA 12, 18; EN50155, EN50121-3-2 Other RIA 13, 18, 20; EN50155 Minimum Load Zero for all outputs Line Regulation ±0.2% all outputs Load Regulation ±0.5% all outputs Remote Sensing Compensates for up to 250mV drop in each line (single output only) Temperature Coefficient <0.02% / °C Output Ripple <1% Pk-Pk of Output Voltage Output Noise <1% Pk-Pk superimposed (up to 20MHz) Response Time 1.0ms to within 2% (for a 20% - 90% load change) Indicators Green LED output Output Protection Output and signal lines protected against indirect transients to RIA 12, EN50155 Current limit Operates at minimum 105% of nominal load. Auto recovery. Primary Protection Operates at approximately 115% of rated output power. Thermal Protection Shuts down PSU if safe internal temperature is exceeded. Auto recovery. CONTACT US If you have a question or need assistance, please send us a message through Ebay using the Ebay messaging system. Normally, you will receive a response within 24-48 hours. If you need additional information on a specific product, please go directly to the manufacturer's website. We do not provide technical support on any of the products. PAYMENT We currently accept PayPal payments for all listings Return Policy: We have 30 days return policy. The buyer must pays for return shipping fees. If the serial number or seal is broken or missing or removed, no refund will be issued.

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. MANUFACTURING DATE: Q1 2013”