159 Epdm O-ring, 70a Durometer, Black, 5" Id, 5-3/16" Od, 3/32" Width Set Of 25

US $8.39

Summerville, South Carolina, United States
Jan 30th

Open on mobile:
QR code

159 EPDM O-Ring, 70A Durometer, Black, 5" ID, 5-3/16" OD, 3/32" Width (Pack of 25) This EPDM O-ring is black in color, round in cross-section, has a durometer of 70A, and is designed for use in a wide variety of sealing applications. EPDM is acceptable for temperature applications between -70 degrees F (-57 degrees C) to 300 degrees F (149 degrees C). It is compatible for use with water and steam, silicone oil and grease, polar solvents (alcohols), acids, glycol-based brake fluids, ozone, and weathering. It is vulnerable to many oils, gasoline, and solvents. This material meets ASTM International standards. This EPDM O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in various sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter. This EPDM O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings. Made of ethylene propylene diene monomer (EPDM) rubber for use with a variety of chemicals and environments Can be used in a wide temperature range from -70 degrees F (-57 degrees C) to 300 degrees F (149 degrees C) Round in cross-section to provide a seal between cylindrical overlapping surfaces Durometer (hardness) of 70A for resistance to penetration Meets standards defined by Aerospace Standard AS568A Product Specifications Part Number ORP-159-25 Actual ID 4.987 inches Inside Diameter Tolerance 0.035 inches Actual OD 5.193 inches Actual Width 0.103 inches Width Tolerance 0.003 inches Nominal ID 4.987 inches Nominal OD 5-3/16 inches Nominal Width 0.103 inches Dash Size 159 Durometer 70A Outside Diameter 5-3/16 inches Pkg Qty 25 Call us at 1-843-261-9553 / 1-800-961-2124 or contact us via eBay with any questions.