1991 Harris - AM Graphics Binding System Model:EB-150 Muller Timmer & Stacker, US $60,000.00 – Picture 0

1991 Harris - AM Graphics Binding System Model:EB-150 Muller Timmer & Stacker, US $60,000.00 – Picture 1

1991 Harris - AM Graphics Binding System Model:EB-150 Muller Timmer & Stacker, US $60,000.00 – Picture 2

1991 Harris - AM Graphics Binding System Model:EB-150 Muller Timmer & Stacker, US $60,000.00 – Picture 3

1991 Harris - AM Graphics Binding System Model:EB-150 Muller Timmer & Stacker, US $60,000.00 – Picture 4

1991 Harris - AM Graphics Binding System Model:EB-150 Muller Timmer & Stacker, US $60,000.00 – Picture 5

1991 Harris - AM Graphics Binding System Model:EB-150 Muller Timmer & Stacker, US $60,000.00 – Picture 6

1991 Harris - AM Graphics Binding System Model:EB-150 Muller Timmer & Stacker, US $60,000.00 – Picture 7

1991 Harris - AM Graphics Binding System Model:EB-150 Muller Timmer & Stacker, US $60,000.00 – Picture 8

1991 Harris - AM Graphics Binding System Model:EB-150 Muller Timmer & Stacker, US $60,000.00 – Picture 9

1991 Harris - Am Graphics Binding System Model:eb-150 Muller Timmer & Stacker

US $60,000.00

Ithaca, New York, United States
Jan 30th

Open on mobile:
QR code

For sale: AM Graphics Perfect Binder With Muller Martini 3 knifeTrimmer and Stacker This binder is complete and in good running condition. The binder can be seen by appointment by contacting John Van Herk 607-330-7123 or jvanherk@vanguardprintingllc.com All offers will be considered. This binder is located in Ithaca NY There are many other pieces of equipment that are for sale as well, please visit our store! PRODUCT SPECIFICATION Machine: Mid-Range Binder System Model: EB-150 Untrimmed (Signature or Book) Width Maximum 12 in. Minimum 4 in Untrimmed (Signature or Book) Length Maximum 19 112 in. Minimum 6 in. Bound Book thickness Maximum 2 5/16 in. Minimum 1/8 in. Loose Bulk thickness Maximum 2 1/2 in. Total power requirements 90 KVA 460 Volts, 3 Phase, 60 Hertz Operating Speed Maximum • 10,000 cph Minimum 2,400 cph Operator Controls Run-jog-stop pushbutton stations mounted at key positions. Fault Jam Detectors Detector limit switches Mounted on all safety clutches and at potential jam areas. System Control 24 Volt, D.C. control, PC control logic. System Drive 20 horsepower D.C. single motor Clamp spacing 22 1/2 in. Number of clamps 22 Compressed Air Requirements: Volume 13 cfm Pressure 80 psi Chip Removal Requirements: Duct Diameter 7 in. Minimum Air Velocity 5,600 ft. min. Minimum Air Volume 1 , 500 cfm Duct Removal Requirements: Duct Diameter 6 in. Minimum Air Velocity 5,600 ft./min. Minimum Air Volume 1,100 cfm BINDER FEATURES Hinge clamp design (22 clamps) allows for straight infeed - approximately 2 degree Hinge clamp are self-compensating for full range of book thickness. Main frame is a bolt-up modular construction and low profile. Includes smooth, computer generated, opener and closing cams for clamps. Features "On 'The Fly" wrench-less adjustments to indicators for fast make-ready. Machine is completely enclosed with hingeable guards - clamp area has transparent enclosure - and electrical interlocks for safety. Machine has interior lighting in work areas. Auto lubrication to roost points. Transfer belts at binder infeed that apply uniform pressure for better control. A selection of cut-offs (saws & roughers) will handle full thickness range. they are mounted separately and roll out for ease of maintenance. New improved hot melt unit with universal. stand and drive & has two wheels. the front wheel rotates in the opposite direction of the clamp. High level (near straight in) - cover feeder, raceway and applier. In-line cover feeder features variable speed pullout rolls to match raceway velocity all under PC control logic. Accurate cover register is assured by the clamp chain driven applier. Horizontal single or double cover scoring with "On The Fly" adjustment. Heavy duty swinq link style cover breaker. Flat belt down hill delivery. Digital fault light display and area condition lights mounted on top of binder.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	3670 3 knife in-line trimmer	99.09816.C229 1986
3630 Stacker 1987	33.17257C607