+ Post new Ad
2 New Carbide .479 Step Drills, coolant thru,135 Deg, .556 Shank, 5.8 inch O.A., US $150 – Picture 0
2 New Carbide .479 Step Drills, coolant thru,135 Deg, .556 Shank, 5.8 inch O.A., US $150 – Picture 0

2 New Carbide .479 Step Drills, Coolant Thru,135 Deg, .556 Shank, 5.8 Inch O.a.

US $150

  • Farmington, Michigan, United States
  • Nov 13th
Open on mobile:
QR code
Two new .479 carbide step drills. 135 drill point, coolant thru,.556 shank with 90 deg chamfer 1.725 deep with 5.8 inch over all. What you see is what you get and thanks for looking.

Directions

Similar products from Solid Carbide Drill Bits

New carbide drill- drill bite sz # 47 - .0785

New carbide drill- drill bite sz # 47 - .0785

  • MA, United States
  • Nov 14th
LOT OF 3 SOLID CARBIDE MACHINIST DOVE TAIL 2 FL MILL CUTTERS

LOT OF 3 SOLID CARBIDE MACHINIST DOVE TAIL 2 FL MILL CUTTERS

  • Los Angeles, California, United States
  • Nov 14th
17 lbs. of Carbide Scrap Metal

17 lbs. of Carbide Scrap Metal

  • Tampa, Florida, United States
  • Nov 14th
16.4 lbs of Carbide Scrap Metal

16.4 lbs of Carbide Scrap Metal

  • Tampa, Florida, United States
  • Nov 14th
GARR RTC Solid Carbide 7.2mm .2835 Diameter 5-1/8" Flute 6-5/8" OAL (4 pcs)

GARR RTC Solid Carbide 7.2mm .2835 Diameter 5-1/8" Flute 6-5/8" OAL (4 pcs)

  • Atwater, Ohio, United States
  • Nov 14th
New Internal Tool Solid Carbide Reverse Corner Rounder .093 Rad (3pc)

New Internal Tool Solid Carbide Reverse Corner Rounder .093 Rad (3pc)

  • El Monte, California, United States
  • Nov 13th
M.A. FORD 78050003 1/2X90 78 FORD CARBIDE 6 FLUTE Chatterless Countersink

M.A. FORD 78050003 1/2X90 78 FORD CARBIDE 6 FLUTE Chatterless Countersink

  • Concord, North Carolina, United States
  • Nov 13th
5.8x6.0x44x82 CARBIDE DREAM DRILL WITH COOLANT HOLES INOX DH452058 5xD KOREA

5.8x6.0x44x82 CARBIDE DREAM DRILL WITH COOLANT HOLES INOX DH452058 5xD KOREA

  • Shakopee, Minnesota, United States
  • Nov 13th
Kennametal 18mm .7087 140 Degree Point Spiral Flute Coollant Thru TiAlN Coat

Kennametal 18mm .7087 140 Degree Point Spiral Flute Coollant Thru TiAlN Coat

  • Westfield, Massachusetts, United States
  • Nov 13th
Ski-Carb™ 2 Flute Solid Carbide Single End Mill For Aluminum

Ski-Carb™ 2 Flute Solid Carbide Single End Mill For Aluminum

  • Woodside, New York, United States
  • Nov 13th
RESHARPENED 3/4" SOLID CARBIDE CENTER-CUTTING 4 FLUTE ENDMILL- MACHINIST

RESHARPENED 3/4" SOLID CARBIDE CENTER-CUTTING 4 FLUTE ENDMILL- MACHINIST

  • Southwest Ohio, United States
  • Nov 13th
Internal Tool Carbide Head Steel Shark Key Cutter 1-1/2 X .0312 (2pc)

Internal Tool Carbide Head Steel Shark Key Cutter 1-1/2 X .0312 (2pc)

  • El Monte, California, United States
  • Nov 12th
1/32" Solid Carbide Drill Bits, (.0312"), Quantity 3

1/32" Solid Carbide Drill Bits, (.0312"), Quantity 3

  • Abingdon, Maryland, United States
  • Nov 12th
POWERBOR Multi Purpose Electromagnetic Drill

POWERBOR Multi Purpose Electromagnetic Drill

  • Duncan, South Carolina, United States
  • Nov 12th
New Kennametal- Solid Carbide Drill- B463S09800 KF1 LK- No 103480994 9,80

New Kennametal- Solid Carbide Drill- B463S09800 KF1 LK- No 103480994 9,80

  • Rock Hill, South Carolina, United States
  • Nov 12th
METAL REMOVAL/WIDIA .1969"x.66"L, .275"x4.09"L, 4-3/4" OAL SOLID CARB Step Drill

METAL REMOVAL/WIDIA .1969"x.66"L, .275"x4.09"L, 4-3/4" OAL SOLID CARB Step Drill

  • Gladstone, Michigan, United States
  • Nov 12th
9/16" GARR SOLID CARBIDE 2 FLUTE DRILL COATED

9/16" GARR SOLID CARBIDE 2 FLUTE DRILL COATED

  • Port Saint Lucie, Florida, United States
  • Nov 12th
5 Lbs Scrap Carbide Mix (Drills, Mills, Inserts) Some Are Still Good

5 Lbs Scrap Carbide Mix (Drills, Mills, Inserts) Some Are Still Good

  • Carville, Louisiana, United States
  • Nov 12th
GUHRING 6511, RT-100, Long, CARBIDE, ALTiN, Coolant Fed Drill Bit, , D-10.0

GUHRING 6511, RT-100, Long, CARBIDE, ALTiN, Coolant Fed Drill Bit, , D-10.0

  • Killeen, Texas, United States
  • Nov 12th
WALTER TITEX XTREME D8, A6489DPP-10.1 Coolant Fed Drill, D-10.1 MADE in Germany

WALTER TITEX XTREME D8, A6489DPP-10.1 Coolant Fed Drill, D-10.1 MADE in Germany

  • Killeen, Texas, United States
  • Nov 12th

People who viewed this item also vieved

106) DGI SUPPLY USA17691 5/8 S.C. N/C SPOT-140 S/C MICROGRAIN SPOTTING DRILL

106) DGI SUPPLY USA17691 5/8 S.C. N/C SPOT-140 S/C MICROGRAIN SPOTTING DRILL

  • Barrington, Illinois, United States
  • Jan 30th
94) NEW WALTER VALENITE XTRA-TEC INSERT DRILL B4213 B4213.UF31.266.Z1.080R-4

94) NEW WALTER VALENITE XTRA-TEC INSERT DRILL B4213 B4213.UF31.266.Z1.080R-4

  • Barrington, Illinois, United States
  • Jan 30th
104) GUHRING 567 15870mm 5/8 HSS NC SPOT SHORT LENGTH DRILL 120PT TIN COATED

104) GUHRING 567 15870mm 5/8 HSS NC SPOT SHORT LENGTH DRILL 120PT TIN COATED

  • Barrington, Illinois, United States
  • Jan 30th
straight shank 35/64" Drill

straight shank 35/64" Drill

  • Morrow, Ohio, United States
  • Jan 30th
straight shank .625" Drill

straight shank .625" Drill

  • Morrow, Ohio, United States
  • Jan 30th
Entended Legnth Twist Drill Bit " Champion" 3/8"

Entended Legnth Twist Drill Bit " Champion" 3/8"

  • Coventry, Rhode Island, United States
  • Jan 30th
Easy Out Extractor NO.10

Easy Out Extractor NO.10

  • New Bedford, Massachusetts, United States
  • Jan 30th
Cleveland LOT OF 5 Jobber Length Drill Bit Size 19/64" .296875 DECIMAL HSCO- 8J

Cleveland LOT OF 5 Jobber Length Drill Bit Size 19/64" .296875 DECIMAL HSCO- 8J

  • New Bedford, Massachusetts, United States
  • Jan 30th
7 Pcs HSS Annular Cutters Set, 1" Cutting Depth, with Weldon Shank, #HCS1-0700

7 Pcs HSS Annular Cutters Set, 1" Cutting Depth, with Weldon Shank, #HCS1-0700

  • Richmond Hill, Ontario, Canada
  • Jan 30th
#4 MORSE TAPPER DRILL -1-5/8"

#4 MORSE TAPPER DRILL -1-5/8"

  • Norwalk, California, United States
  • Jan 30th
#3 MORSE TAPPER DRILL -1"

#3 MORSE TAPPER DRILL -1"

  • Norwalk, California, United States
  • Jan 30th
#4 MORSE TAPPER DRILL -1-27/64"

#4 MORSE TAPPER DRILL -1-27/64"

  • Norwalk, California, United States
  • Jan 30th
(194) IMCO PRODUCTIVE CUTTING TOOLS 069499 P/N 63004 1979 3/8 POWRFEED MILL SLS

(194) IMCO PRODUCTIVE CUTTING TOOLS 069499 P/N 63004 1979 3/8 POWRFEED MILL SLS

  • Barrington, Illinois, United States
  • Jan 30th
10pc Size #1 Number Drill Bit USA C-L Chicago 2-9/16" Long hss split point tip

10pc Size #1 Number Drill Bit USA C-L Chicago 2-9/16" Long hss split point tip

  • Grand Rapids, Michigan, United States
  • Jan 30th
1/8" (.1250) SOLID CARBIDE STRAIGHT FLUTE 140DEG NOTCHED POINT DRILL BIT "NEW"

1/8" (.1250) SOLID CARBIDE STRAIGHT FLUTE 140DEG NOTCHED POINT DRILL BIT "NEW"

  • Largo, Florida, United States
  • Jan 30th
Good Used 1 11/16 14” Long Taper Shank National PF Drill Bit Sharpened & Sealed

Good Used 1 11/16 14” Long Taper Shank National PF Drill Bit Sharpened & Sealed

  • Hammond, Indiana, United States
  • Jan 30th
Good Used 1 11/16 14 1/2” Long Taper Shank Latrobe N710 Drill Bit Sharpened

Good Used 1 11/16 14 1/2” Long Taper Shank Latrobe N710 Drill Bit Sharpened

  • Hammond, Indiana, United States
  • Jan 30th
Good Used 1 11/16 14 1/2” Long Taper Shank National 1490-M Drill Bit Sharpened

Good Used 1 11/16 14 1/2” Long Taper Shank National 1490-M Drill Bit Sharpened

  • Hammond, Indiana, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies