2 PCS MED1 - Micro Effects Dimmer 8 Mode & Adapters LED Lighting Controller 12 V, US $17 – Picture 0

2 PCS MED1 - Micro Effects Dimmer 8 Mode & Adapters LED Lighting Controller 12 V, US $17 – Picture 1

2 PCS MED1 - Micro Effects Dimmer 8 Mode & Adapters LED Lighting Controller 12 V, US $17 – Picture 2

2 Pcs Med1 - Micro Effects Dimmer 8 Mode & Adapters Led Lighting Controller 12 V

US $17

Palmdale, California, United States
Jan 29th

Open on mobile:
QR code

2 PCS LOT Includes a set of terminal block adapters that use screw clamp terminal for wire connection The J2 LED Lighting, LLC P/N MED1 Micro Effects Dimmer provides dimming, multimode effects, and on / off control of 5 – 24 volt DC LED lights. The unit features a simple tactile three button interface; mode, speed, and light. The variety of effects combined with the simplicity of use makes this a great control for low complexity projects. The MED1 has eight dynamic effect modes and ten speed levels. The light button is used to switch the unit to standard static dimming. In the static dimming mode the speed button provides ten brightness steps. The speed button is also used to turn the unit off when it is held more than 1 second. Any button can be used to turn the unit back on. Mode effects patterns: 1) Up / Down varying brightness – always on 2) Strobe – fast 3) Blinking – long on 4) Blinking – long off 5) Flash - burst of pulses (emergency vehicle light) 6) Strobe – slow (beacon light) 7) Up / Down – flame flicker – always on 8) Up / Down – ramp up on ramp down off - repeat The MED1 operates with 5, 9, 12 or 24 volt DC lighting systems and can switch a maximum of 4 amps. The unit provides up to 20 watts of lighting control when using a 5 volt system, 48 watts on 12 volt or up to 96 watts of lighting on a 24 volt system. The control may be operated from a 9 volt battery for portable applications, it is recommended to limit the LED light load current to 100ma for battery life. The MED1 is equipped with a barrel connector type DC power jack and plug. The connectors are of the 5.5mm x 2.1mm size with a positive center connection. The MED1 is compatible with other J2 LED Lighting accessories of the same connector type. The body of the MED1 control is of a small size with a low profile. The MED1 body measures a nominal 1.4” length, 0.6” wide and 0.2” thickness. Each of the connector cables extends from the body 5.5”. The overall end to end length of the entire body and cable assembly is 13.0” Max. The unit’s body is sleeved in black and the cables are molded in black PVC. Well suited for various LED lighting applications such as: Flex Strip accent lighting Promotional LED signs Specialized decor lighting F/X prop and costume lighting Stage Lighting Theatrical effects lighting POS Point Of Sale displays Architectural accent lighting See the spec sheet in the photos for more details. Posted with eBay Mobile