US $16.24
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Material | Carbide |
Helix Angle | 30° Helix | ||
Coating | None | ||
Cutting Diameter | 3/16in. | ||
End Type | Single End | ||
Shank Diameter | 3/16in. | ||
Brand | SGS | ||
Overall Length | 2in. | ||
Model | 30123 | ||
Quantity | 2 | ||
Flutes | 4-Flute |
Directions
Similar products from End Mills Router & Drill Bits
LOT OF 9 HSS KEYSEAT CUTTERS 5/16" TO 1-1/4" QUALITY CUT-RITE UTD
LOT OF 13 HSS FRESHLY SHARPENED DOUBLE END MILLS 1/8" TO 5/16" PUTNAM GREENFIELD
Controx 1/2" x 1-1/4" 4 FLT M42-8% Cobalt Fine-Pitch Roughing CNC End Mill
5 Pcs. Controx 1" M42-8% Cobalt Fine-Pitch Roughing CNC End Mills-TiN Coated
Controx 3/4" x 1-5/8" 4 FLT CC Cobalt Coarse Pitch Roughing CNC End Mill
4 Pcs. Controx 1" 5% Cobalt Coarse-Pitch Roughing CNC End Mills-TiCN Coated
Controx 1" x 1" x 4" x 6-1/2" 5 FLT CC Cobalt Coarse-Pitch Roughing CNC End Mill
Controx 2" x 2" x 3" M42-8% Cobalt 6 FLT Finisher C.C Heavy Duty CNC End Mill
Controx 5/16" x 1-3/8" 4 FLT M42-8% Cobalt Fine-Pitch Roughing CNC End Mill
NEW!! LOT OF 10 HSS END MILLS 7/32" TO 1/2" WELDON NIAGARA
2- SGS 38249 3CR 2 Flute CR Uncoated, 3/8" Cutting Diameter, 1" Cutting .030 RAD
SGS 38223 3CR 2 Flute Corner Radius .030 General Purpose End Mill, UncoateD
15 NEW 1/8" SHANK CARBIDE END MILLS. 4 FLUTE. USA MADE {E933}
3 NEW SOLID CARBIDE ENDMILL 5/8" DIAMETER. 2 FLUTE. USA (Z402A)
2 NEW NIAGARA CARBIDE ENDMILLS 3/8" DIA 3/8" SH. 5 FL .030 RAD. COATED F34
5 NEW 3/8" SHANK HSS END MILLS. 4 FL. 5/16" SLIGHTLY UNDER / OVER SIZED USA F49
9 NEW 9/32" DIAMETER CARBIDE END MILLS. 2 FLUTE. MADE IN USA [A584]
2 NEW 1/2" SHANK HSS END MILLS. 4 FLUTE. SLIGHTLY UNDER OR OVER SIZED USA {F45}
1 NEW 3/8" SHANK CARBIDE ENDMILLS. 3/8" DIAMETER. 4 FLUTE. MADE IN USA (Z618)
3 NEW 3/8" DIAMETER CARBIDE END MILL. 2 FLUTE. 3/8" SHANK. MADE IN USA [A567]
People who viewed this item also vieved
(337) NEW UNIBIT STEP DRILL 3/4" - 1 3/8"#10221 AMERICAN TOOL CO 21
(160) NEW SANDVIK COROMANT CPMT 3(2.5)2-MM GRADE 1025 CARBIDE TURNING 10 INSERTS
INGERSOLL 36J5F0406R40 INDEXABLE 4" SLOT MILLING CUTTER SLOT MILL
VALENITE VMM-50-6-081GRA 8" SLOT MILLING CUTTER
"STARLITE" Solid Carbide Reamers # 448025, 1.181mm Diam. lot of 2 pcs
"STARLITE" Solid Carbide Reamers # 448050, 1.588mm, lot of 2 pcs
3-Dies & Die Wrench 3/4 ”Round Sae & MM G.U.C. USA
STRIPPIT Nisshinbo AMADA PUNCH & DIE WILSON .125 X .250 RT +.008 H10
154" (12'10") X 1" X .035 X 14T COBALT BIMETAL BAND SAW BLADE DISSTON USA
Birkestrand Large Capacity Roll Type Pipt Cutter - Used - AM11290
TUNGALOY CERAMIC INSERTS TPGN 322 PACK OF 10 GRADE LX11
10 pack Greenleaf RCGN-2V Ceramic Inserts GA5026 rcgx-060400s
Hougen 12218 9/16" x 2" Depth of Cut Rotabroach Annular Cutter
Hougen 12126 13/16" x 1" Depth of Cut Rotabroach Annular Cutter
CHAMPION SILVER & DEMING DRILL BRUTE PLATINUM 712 5/8" 1/2" shank BIT NEW
CHAMPION SILVER & DEMING DRILL BRUTE PLATINUM 712 3/4" 1/2" shank BIT NEW
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies