+ Post new Ad
2 X 14 Supreme Wet Core Bit, US $86.67 – Picture 0
2 X 14 Supreme Wet Core Bit, US $86.67 – Picture 0

2 X 14 Supreme Wet Core Bit

US $86.67

  • Astoria, New York, United States
  • Jan 30th
Open on mobile:
QR code
Builders Depot® 2" X 14" Supreme Wet Core Bit with 1-1/4"-7 Female Head. Our Builders Depot® Core Bits have laser welded segments containing the highest quality artificial diamonds and have been specially formulated to offer the best performance in most materials. Supreme quality diamond bits are the preferred choice of professional concrete coring and drilling contractors, and are designed for medium to large sized jobs where cost per hole is important. The supreme bits have a greater amount of high quality diamond in the segment, which provide faster cutting and longer life. Laser welding helps prevent segment loss. Special lengths are available and can be shipped within 24-48 hours. 1-3/4" diameter and smaller coring bits have a 5/8"-11 built in head. 2" diameter and larger coring bits have a 1-1/4"-7 built in head. These bits are compatible with all standard core-drill motors including, but not limited to: Core-Bore, Milwaukee, Weka and Eibenstock. We stock adapters so you can use our bits on Hilti Core Drill Machines. This bit is designed to cut the following materials: Block, Brick, Concrete, Critically Hard Concrete, Cured Concrete, Green Concrete, Hard Aggregate, Hard Brick, Hard Concrete, Masonry, Pavers, Precast Plank, Reinforced Concrete, Soft Aggregate, Soft Asphalt. If you have any application or technical questions, please call us at 1-800-777-0969 to speak to one of our highly experienced core drilling professionals.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Builders Depot®
Country/Region of Manufacture United States

Directions

Similar products from Core Drills & Rigs

Pitt Industrial Diamond 1 3/8" Diamond Core Bit 15 " Long

Pitt Industrial Diamond 1 3/8" Diamond Core Bit 15 " Long

  • Bridgeville, Pennsylvania, United States
  • Jan 30th
HiLTI Drill Bit TE-CX 1/4" / 6" For Concrete, Carbide Tip NEW in Package

HiLTI Drill Bit TE-CX 1/4" / 6" For Concrete, Carbide Tip NEW in Package

  • Los Angeles, California, United States
  • Jan 30th
NEW HILTI 1-1/8" Diamond Core Bit (336915)

NEW HILTI 1-1/8" Diamond Core Bit (336915)

  • Pasadena, Texas, United States
  • Jan 30th
3/4" PREMIUM Wet Diamond Core Drill Bit for Concrete 5/8"-11 Threads

3/4" PREMIUM Wet Diamond Core Drill Bit for Concrete 5/8"-11 Threads

  • Rowland Heights, California, United States
  • Jan 30th
6-1/4" Wet Concrete Diamond Core Drill Bit - PREMIUM

6-1/4" Wet Concrete Diamond Core Drill Bit - PREMIUM

  • Rowland Heights, California, United States
  • Jan 30th
HILTI DD-B1 47/430 P2 1-3/4” X 17” DIAMOND CORE DRILL BIT WITH BOX 370255

HILTI DD-B1 47/430 P2 1-3/4” X 17” DIAMOND CORE DRILL BIT WITH BOX 370255

  • Elmwood, Illinois, United States
  • Jan 30th
Husqvarna Banner Line Core Drill Bit 2-inch 10353

Husqvarna Banner Line Core Drill Bit 2-inch 10353

  • Eastpointe, Michigan, United States
  • Jan 30th
16mm (5/8") Diameter Heavy Duty Diamond Segments Core Drill Bit Hole Saw

16mm (5/8") Diameter Heavy Duty Diamond Segments Core Drill Bit Hole Saw

  • Champlain, New York, United States
  • Jan 30th
Silverline 40-300Mm Adjustable Drill Circular Hole Cutter Cutting Heavy Duty

Silverline 40-300Mm Adjustable Drill Circular Hole Cutter Cutting Heavy Duty

  • London, United Kingdom
  • Jan 30th
4" Diamond Core Drill Bit Wet For Concrete

4" Diamond Core Drill Bit Wet For Concrete

  • SHANGHAI CHINA, China
  • Jan 30th
2-1/2" Wet Diamond Core Drill Bit For Concrete

2-1/2" Wet Diamond Core Drill Bit For Concrete

  • SHANGHAI CHINA, China
  • Jan 30th
2" Wet Diamond Core Drill Bit For Concrete Good Quality

2" Wet Diamond Core Drill Bit For Concrete Good Quality

  • SHANGHAI CHINA, China
  • Jan 30th
RIPLEY CST-412 CORING AND STRIPPING TOOL. MADE IN THE USA

RIPLEY CST-412 CORING AND STRIPPING TOOL. MADE IN THE USA

  • Niagara Falls, New York, United States
  • Jan 30th
COMBO: 1", 2", 3", 4” Premium Dry Core Drill Bit for Concrete Masonry

COMBO: 1", 2", 3", 4” Premium Dry Core Drill Bit for Concrete Masonry

  • Rowland Heights, California, United States
  • Jan 30th
Hilti Diamond Core Bit, DD-B 2"/16"+H4S, Brand New in Original Box,2 pcs avail

Hilti Diamond Core Bit, DD-B 2"/16"+H4S, Brand New in Original Box,2 pcs avail

  • United States
  • Jan 30th
Hilti Diamond Core Bit, DD-B 1-1/2"/16"+H4S, Brand New in Original Box

Hilti Diamond Core Bit, DD-B 1-1/2"/16"+H4S, Brand New in Original Box

  • United States
  • Jan 30th
Hilti Diamond Core Bit, DD-B 4"/16"+H2S, Brand New in Original Box

Hilti Diamond Core Bit, DD-B 4"/16"+H2S, Brand New in Original Box

  • United States
  • Jan 30th
TWO (2) SMALL DRILL BITS - 4 1/2" LONG - VERY GOOD COND.

TWO (2) SMALL DRILL BITS - 4 1/2" LONG - VERY GOOD COND.

  • Hanover, Indiana, United States
  • Jan 30th
BOILER TUBE BRUSH - 8 1/4" LONG - GOOD COND.

BOILER TUBE BRUSH - 8 1/4" LONG - GOOD COND.

  • Hanover, Indiana, United States
  • Jan 30th
1.25" 1 1/4" Diamond Core Bit Drill Concrete Wet Cut Masonry Electrical Pipe

1.25" 1 1/4" Diamond Core Bit Drill Concrete Wet Cut Masonry Electrical Pipe

  • Irvine, California, United States
  • Jan 30th

People who viewed this item also vieved

HILTI REPLACEMENT HANDLE FOR TE-4A,TE6A,Te 6 -TE7 TE7A-TE 7C-Te 30C-ORIGINAL,l@@

HILTI REPLACEMENT HANDLE FOR TE-4A,TE6A,Te 6 -TE7 TE7A-TE 7C-Te 30C-ORIGINAL,l@@

  • Salinas, California, United States
  • May 31st
DeWALT ROTARY HAMMER DRILL BIT DW5700 3/8" 5" X 10"

DeWALT ROTARY HAMMER DRILL BIT DW5700 3/8" 5" X 10"

  • Beaufort, North Carolina, United States
  • May 31st
Makita Model HR4000C 1-9/16" (40mm) Rotary Hammer Drill

Makita Model HR4000C 1-9/16" (40mm) Rotary Hammer Drill

  • Norwood, Pennsylvania, United States
  • May 31st
4-1/4" Magic Feed Planetor-Bit For Use On FP Shank and FP Pilots w/ 6 Skip Chips

4-1/4" Magic Feed Planetor-Bit For Use On FP Shank and FP Pilots w/ 6 Skip Chips

  • Lowell, Massachusetts, United States
  • Jun 1st
3-1/8" Magic Feed Planetor-Bit For Use On FP Shank and FP Pilots w/ 4 Skip Chips

3-1/8" Magic Feed Planetor-Bit For Use On FP Shank and FP Pilots w/ 4 Skip Chips

  • Lowell, Massachusetts, United States
  • Jun 1st
4-1/8" Magic Feed Planetor-Bit For Use On FP Shank and FP Pilots w/ 3 Skip Chips

4-1/8" Magic Feed Planetor-Bit For Use On FP Shank and FP Pilots w/ 3 Skip Chips

  • Lowell, Massachusetts, United States
  • Jun 1st
9/16" Carbide tipped Coolant Screw machine Drill Bits EDP 29705625 KoolTwist

9/16" Carbide tipped Coolant Screw machine Drill Bits EDP 29705625 KoolTwist

  • Punta Gorda, Florida, United States
  • Jun 9th
DEWALT DW5783B10 9-1/2-Inch by 1-3/4-Inch Bushing Tool Spline Shank!!!

DEWALT DW5783B10 9-1/2-Inch by 1-3/4-Inch Bushing Tool Spline Shank!!!

  • Callahan, Florida, United States
  • Jun 9th
Ingersoll-Rand 16 x 3 x 7/8 Digging Chisel Pavement Breaker 22040968

Ingersoll-Rand 16 x 3 x 7/8 Digging Chisel Pavement Breaker 22040968

  • Venice, Florida, United States
  • Jun 9th
Used Masonry Rotary Hammer 1-1/4" TE60 Drill bit B4

Used Masonry Rotary Hammer 1-1/4" TE60 Drill bit B4

  • Wichita, Kansas, United States
  • Jun 20th
Hilti Masonry Rotary Hammer 7/8" TE60 Drill bit B3

Hilti Masonry Rotary Hammer 7/8" TE60 Drill bit B3

  • Wichita, Kansas, United States
  • Jun 20th
Hilti Masonry Rotary Hammer 7/8" TE60 Drill bit B2

Hilti Masonry Rotary Hammer 7/8" TE60 Drill bit B2

  • Wichita, Kansas, United States
  • Jun 20th
SENCO Dura Spin Screw Fastening System. Slightly Used

SENCO Dura Spin Screw Fastening System. Slightly Used

  • Glen Mills, Pennsylvania, United States
  • Oct 28th
Ridgid 1/4 in. AC Corded Electric Collated Screw Screws Gun Screwgun

Ridgid 1/4 in. AC Corded Electric Collated Screw Screws Gun Screwgun

  • Saint Paul, Minnesota, United States
  • Oct 28th
Brand New Hilti SD 4500 18 Volt Lithium-Ion 1/4 in. Cordless Drywall Screwdriver

Brand New Hilti SD 4500 18 Volt Lithium-Ion 1/4 in. Cordless Drywall Screwdriver

  • Jacksonville, North Carolina, United States
  • Oct 28th
Brand New DEWALT DCD740B 20V MAX Li-Ion 3/8 In. Right Angle Drill/Driver

Brand New DEWALT DCD740B 20V MAX Li-Ion 3/8 In. Right Angle Drill/Driver

  • Niagara Falls, New York, United States
  • Nov 19th
Right Angle Drill Attachment w/handle & key - Speedway Series

Right Angle Drill Attachment w/handle & key - Speedway Series

  • Benton Harbor, Michigan, United States
  • Nov 20th
Right Angle Drill Adapter Attachment 1/4" Hex Shank Tight Spaces Drilling Holes

Right Angle Drill Adapter Attachment 1/4" Hex Shank Tight Spaces Drilling Holes

  • Irvine, California, United States
  • Nov 20th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies