+ Post new Ad
2005 YCM TC-36W CNC Lathe-Turning Center # 7761278, US $12000 – Picture 0
2005 YCM TC-36W CNC Lathe-Turning Center # 7761278, US $12000 – Picture 0

2005 Ycm Tc-36w Cnc Lathe-turning Center # 7761278

US $12000

  • Encino, California, United States
  • Jun 16th
Open on mobile:
QR code
         7918  E McClain Drive Suite 101 Scottsdale AZ 85260   Tel: 922-1674 Fax: 480-922-1675 We are pleased to offer the following for your consideration: Ref # 7761278 One (1) 2005 YCM TC-36W LATHES, CNC General Specifications: Max. Turn Diameter: 23.2" Max. Turning Length: 23.7" Distance Between Centers: 25" Swing Over Bed: 27.1" Swing Over Carriage: 20" Chuck Size: 12" Spindle Bore: 4.13" Bar Capacity: 3.5" Axes: 2 X-Axis: 12.2" Z-Axis: 49.2" Spindle Speed: 2,500 RPM Spindle Motor: 35 Horsepower Turret: 12 Tools Max. Rapid Rate (X/Z): 590/787 IPM Tool Size (OD/ID): 1.0" / Centerline 1.5"-2.0" Power Consumption: 30 kVa Machine Weight: 13,0000 Lbs. Floor Space: 123" x 121" x 80" Equipped with: Fanuc TXP-200E Control Hollow 12" Chuck Programmable Tailstock Coolant Equipment Chip Conveyor We can provide shipping quotes upon your request.  Contact K.D. Capital Equipment at 480-922-1674 with any questions, etc. Any descriptions of the condition of the equipment are not warranties and any equipment descriptions are intended only as a guide and their accuracy is not guaranteed and must be independently verified by the buyer.  *Machine locations may vary, please contact K.D. Capital for current locations.*

Directions

Similar products from Other Manufacturing Equipment & Tools

2006 Mori Seiki Duravertical 5100 Vertical Machining CenterVMCCNC Mill #7761448

2006 Mori Seiki Duravertical 5100 Vertical Machining CenterVMCCNC Mill #7761448

  • Granite Falls, Washington, United States
  • Jun 16th
#36-6 Fellows Vertical Gear Shaper #27856

#36-6 Fellows Vertical Gear Shaper #27856

  • Cincinnati, Ohio, United States
  • Jun 16th
1983 Wysong 250 Ton Press Brake Fabrication CNC # 7710260

1983 Wysong 250 Ton Press Brake Fabrication CNC # 7710260

  • Milwaukee, Wisconsin, United States
  • Jun 16th
Smokeeter By United Air Specialist 115 Volts Used Units. I Have Two 499.00 Each.

Smokeeter By United Air Specialist 115 Volts Used Units. I Have Two 499.00 Each.

  • Hanover, Massachusetts, United States
  • Jun 16th
16" Swing Victor Toolroom Engine Gap Lathe Model 1640B with tooling

16" Swing Victor Toolroom Engine Gap Lathe Model 1640B with tooling

  • Middlesex, New Jersey, United States
  • Jun 16th
BETENBENDER #10-50 10' X 50TON HYDRAULIC PRESS BRAKE

BETENBENDER #10-50 10' X 50TON HYDRAULIC PRESS BRAKE

  • Brook Park, Ohio, United States
  • Jun 16th
16" Swing Victor Toolroom Engine Gap Lathe Model 1630B with tooling

16" Swing Victor Toolroom Engine Gap Lathe Model 1630B with tooling

  • Middlesex, New Jersey, United States
  • Jun 16th
1981 HTC 500-12A Hydraulic Shear

1981 HTC 500-12A Hydraulic Shear

  • Los Angeles, California, United States
  • Jun 16th
Rapid Air Feed B-2 Serial No. 28207

Rapid Air Feed B-2 Serial No. 28207

  • Pawtucket, Rhode Island, United States
  • Jun 16th
2012 Acra LCV-2414-S CNC Vertical Machining Center-VMC-Mill # 7783150

2012 Acra LCV-2414-S CNC Vertical Machining Center-VMC-Mill # 7783150

  • Salem, Oregon, United States
  • Jun 16th
2003 Fadal 3020HT VMC, 10,000 rpm, 24 side mount atc, clean

2003 Fadal 3020HT VMC, 10,000 rpm, 24 side mount atc, clean

  • Oakland, California, United States
  • Jun 16th
Petersen 1" X 1/2" X 4 1/2" Medium Duty Die Springs, White/Blue Stripe, M100-450

Petersen 1" X 1/2" X 4 1/2" Medium Duty Die Springs, White/Blue Stripe, M100-450

  • Abingdon, Maryland, United States
  • Jun 16th
1997 Fadal 3016HT, 10,000 rpm, 21 ATC, 88HS Control, 22hp High Torq

1997 Fadal 3016HT, 10,000 rpm, 21 ATC, 88HS Control, 22hp High Torq

  • Sacramento, California, United States
  • Jun 16th
Nte Electronics El01-010 Nte Semiconductor Technical Guide And Cross Reference

Nte Electronics El01-010 Nte Semiconductor Technical Guide And Cross Reference

  • Appleton, Wisconsin, United States
  • Jun 16th
Mathey Beveling Machine 8" to 10"

Mathey Beveling Machine 8" to 10"

  • Houston, Texas, United States
  • Jun 16th
Warner & Swasey (1) SLIDE TOOL (3) ADJUSTABLE KNEE TOOL M1862 M1863 turret lathe

Warner & Swasey (1) SLIDE TOOL (3) ADJUSTABLE KNEE TOOL M1862 M1863 turret lathe

  • Broadview Heights, Ohio, United States
  • Jun 16th
NEW CR-14972 OIL SEAL

NEW CR-14972 OIL SEAL

  • Roscoe, Illinois, United States
  • Jun 16th
NEW CR 12336 OIL SEAL

NEW CR 12336 OIL SEAL

  • Roscoe, Illinois, United States
  • Jun 16th
NEW CR- 7439 OIL SEAL

NEW CR- 7439 OIL SEAL

  • Roscoe, Illinois, United States
  • Jun 16th
5 Ton Whitney Jensen Gap Frame Punch Press Model: AR130

5 Ton Whitney Jensen Gap Frame Punch Press Model: AR130

  • Dayton, Ohio, United States
  • Jun 16th

People who viewed this item also vieved

Cerrobend (aka Bolton 158) 1 lb. ingot Low Melting Temperature Alloy

Cerrobend (aka Bolton 158) 1 lb. ingot Low Melting Temperature Alloy

  • United States
  • Jan 30th
live steam 20mm dia O-150 PSI pressure gauge

live steam 20mm dia O-150 PSI pressure gauge

  • Jerusalem, Israel, Israel
  • Jan 30th
Scrap Lead 63 Lbs. Soft Great Scrap

Scrap Lead 63 Lbs. Soft Great Scrap

  • Yarmouth, Maine, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies