+ Post new Ad
24" x 50' White Aluminum trim Coil (CuttingEdge), US $460 – Picture 0
24" x 50' White Aluminum trim Coil (CuttingEdge), US $460 – Picture 0

24" X 50' White Aluminum Trim Coil (cuttingedge)

US $460

  • Colonia, New Jersey, United States
  • May 27th
Open on mobile:
QR code
SquareTrade © AP6.0 OVERVIEW ALUMINUM TRIM COIL SPECIFICATIONS Trim coil is primarily used when creating custom fabricated covers to protect hard to maintain areas on a home or business exterior. Allied Building Products’ CuttingEdge is available in virtually all Allied locations that offer premium vinyl, steel and aluminum sidings – and vinyl and wood windows for the quality oriented craftsman contractor. CuttingEdge trim coil is manufactured to strict specifications to ensure dependable quality in multiple colors that match Allied’s preferred and recommended siding lines.   Painted Trim coil is manufactured from 3000 series alloy, commercial quality aluminum sheet. Nominal thickness can be from 0.019 inch to.024 inch in 24” x 50 ft. only. Both sides of the aluminum sheet are continuously coated with two protective coatings, using a roller coating technology. The first coating is a corrosion resistant inorganic treatment. The second coating (i.e., the top coat) is a thermosetting polyester coating applied at a nominal of .082 mils. This process yields a nominal coating thickness of 0.92 mils.

Directions

Similar products from Metals & Fusions

16 Oz metal shavings steel cuttings craft scrapbooking mixed media steam punk

16 Oz metal shavings steel cuttings craft scrapbooking mixed media steam punk

  • Bethel, Vermont, United States
  • May 27th
4.528 wide X 0.0045 thick, aluminum shim stock flashing $3 per foot

4.528 wide X 0.0045 thick, aluminum shim stock flashing $3 per foot

  • Etowah, Tennessee, United States
  • May 27th
10 lbs 304 316 Stainless steel 24 gage Plate shipping box protectors

10 lbs 304 316 Stainless steel 24 gage Plate shipping box protectors

  • Bethel, Vermont, United States
  • May 27th
50 LBS 3/16" Thick 7ga 11ga Steel Plate flat metal for welding various shapes

50 LBS 3/16" Thick 7ga 11ga Steel Plate flat metal for welding various shapes

  • Bethel, Vermont, United States
  • May 27th
4" DIAMETER X 10" LONG 7075 T6 ALUMINUM ROUND BAR

4" DIAMETER X 10" LONG 7075 T6 ALUMINUM ROUND BAR

  • Albuquerque, New Mexico, United States
  • May 27th
8 Piece 6-1/4 x 3-15/16 x 3/16 Aluminum Sheet Plate Scrap Metal Material 3.8+ lb

8 Piece 6-1/4 x 3-15/16 x 3/16 Aluminum Sheet Plate Scrap Metal Material 3.8+ lb

  • Burlington, North Carolina, United States
  • May 27th
93 Piece Lot Aluminum Sheet Plate 6-1/4" x 3-7/8" Scrap Metal Material 43+ lbs

93 Piece Lot Aluminum Sheet Plate 6-1/4" x 3-7/8" Scrap Metal Material 43+ lbs

  • Graham, North Carolina, United States
  • May 27th
5-1/4" x 18" ROUND DELRIN MACHINABLE PLASTIC STOCK WHITE

5-1/4" x 18" ROUND DELRIN MACHINABLE PLASTIC STOCK WHITE

  • Ellington, New York, United States
  • May 27th
GAS FURNACE WITH BLOWER FOR SMELTING METAL SPEEDY-MELT

GAS FURNACE WITH BLOWER FOR SMELTING METAL SPEEDY-MELT

  • Kingman, Arizona, United States
  • May 27th
X 4 LINEAR SHAFT SUPPORT RAIL ROD OPTICAL AXIS STEEL 3/4" OD X 6" (150 mm) NOS

X 4 LINEAR SHAFT SUPPORT RAIL ROD OPTICAL AXIS STEEL 3/4" OD X 6" (150 mm) NOS

  • Vera, Oklahoma, United States
  • May 27th
Nanota SUS430 5cm thick 342.9m Long Stainless Steel 72 lbs

Nanota SUS430 5cm thick 342.9m Long Stainless Steel 72 lbs

  • Ventura, California, United States
  • May 27th
1 " cold rolled steel bar ends 12 pieces

1 " cold rolled steel bar ends 12 pieces

  • Marshalltown, Iowa, United States
  • May 27th
Aluminum Block 2" x 2" x 1 3/8"

Aluminum Block 2" x 2" x 1 3/8"

  • Brockport, New York, United States
  • May 27th
4 Aluminum Blocks Various Sizes and shapes

4 Aluminum Blocks Various Sizes and shapes

  • Brockport, New York, United States
  • May 27th
Aluminum Block 8 1/4" x 1 1/2" x 1"

Aluminum Block 8 1/4" x 1 1/2" x 1"

  • Brockport, New York, United States
  • May 27th
Metal Block 8 3/8" x 1 1/2" x 1" says CRS on side Very heavy

Metal Block 8 3/8" x 1 1/2" x 1" says CRS on side Very heavy

  • Brockport, New York, United States
  • May 27th
13 pieces 5/8 " Aluminum round bar ends

13 pieces 5/8 " Aluminum round bar ends

  • Marshalltown, Iowa, United States
  • May 27th
316 Stainless Steel Bar,Rod 1-1/8" x 12"

316 Stainless Steel Bar,Rod 1-1/8" x 12"

  • Oxford, Connecticut, United States
  • May 26th
Stainless Pipe 316/316L 3/4"(.750)OD x.100 wall (sch 10) x 12" welded

Stainless Pipe 316/316L 3/4"(.750)OD x.100 wall (sch 10) x 12" welded

  • Oxford, Connecticut, United States
  • May 26th
Platinum scrap for recovery Catalytic converter converters 10 lb pounds full

Platinum scrap for recovery Catalytic converter converters 10 lb pounds full

  • Santa Barbara, California, United States
  • May 26th

People who viewed this item also vieved

Cincinnati 21" x 120" Engine lathe Tool Post 6 Jaw Chuck

Cincinnati 21" x 120" Engine lathe Tool Post 6 Jaw Chuck

  • Lexington, North Carolina, United States
  • Feb 24th
Clausing Engine Lathe

Clausing Engine Lathe

  • East Hartford, Connecticut, United States
  • Feb 24th
2003 AccurPress 7608, 60 Ton x 8' Press Brake w CNC Backagauge, 2 Axis Control

2003 AccurPress 7608, 60 Ton x 8' Press Brake w CNC Backagauge, 2 Axis Control

  • La Mirada, California, United States
  • Feb 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies