25 PCS NCP1117ST25T3 Encapsulation:SOT-223,1.0 A Low-Dropout Positive Fixed, US $7.00 – Picture 0

25 PCS NCP1117ST25T3 Encapsulation:SOT-223,1.0 A Low-Dropout Positive Fixed, US $7.00 – Picture 1

25 Pcs Ncp1117st25t3 Encapsulation:sot-223,1.0 A Low-dropout Positive Fixed

US $7.00

Pompano Beach, Florida, United States
Jun 9th

Open on mobile:
QR code

25 PCS lot of the NCP1117ST25T3 Encapsulation: SOT-223,1.0 A Low-Dropout Positive Fixed. 25 pcs lot of the NCP117ST25T3 voltage regulator fixed. The NCP1117 series are low dropout positive voltage regulators that are capable of providing an output current that is in excess of 1.0 A with a maximum dropout voltage of 1.2 V at 800 mA over temperature. This series contains nine fixed output voltages of 1.5 V, 1.8 V, 1.9 V, 2.0 V, 2.5 V, 2.85 V, 3.3 V, 5.0 V, and 12 V that have no minimum load requirement to maintain regulation. Also included is an adjustable output version that can be programmed from 1.25 V to 18.8 V with two external resistors. On chip trimming adjusts the reference/output voltage to within ±1.0% accuracy. Internal protection features consist of output current limiting, safe operating area compensation, and thermal shutdown. The NCP1117 series can operate with up to 20 V input. Devices are available in SOT–223 and DPAK packages. Features ? Output Current in Excess of 1.0 A ? 1.2 V Maximum Dropout Voltage at 800 mA Over Temperature ? Fixed Output Voltages of 1.5 V, 1.8 V, 1.9 V, 2.0 V, 2.5 V, 2.85 V, 3.3 V, 5.0 V, and 12 V ? Adjustable Output Voltage Option ? No Minimum Load Requirement for Fixed Voltage Output Devices ? Reference/Output Voltage Trimmed to ±1.0% ? Current Limit, Safe Operating and Thermal Shutdown Protection ? Operation to 20 V Input ? NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC–Q100 Qualified and PPAP Capable ? These are Pb-Free Devices Applications ? Consumer and Industrial Equipment Point of Regulation ? Active SCSI Termination for 2.85 V Version ? Switching Power Supply Post Regulation ? Hard Drive Controllers ? Battery Chargers For more details see: http://www.onsemi.com/pub_link/Collateral/NCP1117-D.PDF

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	UTSOURCE
Country/Region of Manufacture	Malaysia
MPN	Does Not Apply