250mw 405nm High Power Blue-violet Laser Diode Module,300mw Pulse,tiny Heatsink

US $49.00

Seoul, default, Korea, South
Jan 30th

Open on mobile:
QR code

250mW+ 405nm Blue Violet Laser Diode Module with Adjustable Lens, Tiny Heatsink for Laser module and 9 Component Test Driver DIY Kit include tiny heatsink for laser diode housing. Sell AS IT IS as an EXPERIMENTAL COMPONENT without warranty. Ship after 180mA inspection for not stress diode. This item is for replacement of laser show 405nm Blue laser diode module. There are countless uses for a small compact Blue - Violet laser, such as HOLOGRAPHY, LASER LIGHT SHOWS, Medical, etc... Be carful, this power can burn human skin immediately. Please visit my store http://stores.ebay.com/Zet-Biz for more high power Red, Blue-Violet, Green and IR Laser items. You are bidding on a precision new Single Mode Blu-ray blue violet laser diode module. Laser diodes are rated for Class IIIb 250mW @405-410nm CW extract from never used Blu-Ray RW Pickup. This diode died after 414mW@350mA 10mA step I-P-V test - room temperature with glass lens after install tiny heatsink. This module include a tiny heatsink (glass lens not included). It is possible order 405nm AR coated glass lens as optional part($17). Max Output : With tiny heat sink (200mW @ 180mA, 250mW@ 230mA, 300mW@ 270mA, 350mW@ 300mA, 414mW@ 350mA) I recommand less than 30 sec duty for 200-300mW drive eventhough it's work 40 minutes continuously with a tiny heatsink and 2:40 with 2 tiny heatsink at 250mW. Or this module need more heatsink than a tiny heatsink for more long work. Recommand Output : 200mW@ 180mA(tiny heatsink) Threshold Current : ~33mA(~3.6V) Operation Voltage : ~5.0V @ 180mA Module : 12mm diameter x 30mm length with acrylic lens Lead wire 30cm(Red plus[+], Black minus[-]) with 2.5mm pitch Connector. DIY Kit : 9 component, 320mA max limit (Parts can different with photo but same capacity) By bidding you AGREE and ACCEPT: You Are over 18 and know the potential hazards inherent in high power laser equipment. You WILL use this device in a safe and sane manner for a legal purpose You Accept this item as a COMPONENT for integration in a system of YOUR OWN design and will hold the SELLER LEGALLY harmless from any and all LIABILITY You are buying A LOT QTY= 1 LASER DIODE MODULE FOR YOUR BID You know the electronic safety precautions necessary with this item and therefore accept it AS IT IS as an EXPERIMENTAL COMPONENT without warranty. Don't reply to email rather than use ebay message, some email not arrive and can erase with many spam mail. I sure Ebay message system is certain and leave evidence. $40 for FedEx international shipping about 2-3 days GLOBALLY. Standard shipping(Registered Mail) is $8, generally about 2 week(5-20days), but rare case delay because destinations postal service. I combine ship and I accept paypal. Thanks for looking :-) For order optional Driver, heat sink or glass lens, Please "request total" from paynow page before pay. Optional adjustable output constant current PWM driver $30( 50x 35mm - Board can change without notice for improve) - exchange with DIY kit. Laser From 60+mW Module Drive : Switch mode constant current 122mA at ~5.5V (Click Photo to enlarge) For More Laser Photo Visite http://Zet.biz

Condition:

New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...

Product Type

Lasers