3.5" Tft Lcd Touch Screen Module Spi Rgb Display For Raspberry Pi 3 2 B+ Pi2

US $180

  • Quakertown, Pennsylvania, United States
  • Nov 19th
Features:  TFT features:  1.LCD Type                         : TFT Transmissive  ---  2.interface                           : spi(32MHZ)  3.Number of Dots              : 320*(RGB)*480  Dots  4.size                                    : 86.0*56.2mm  5.Approx. Weight                : TBD  g  6.Back Light                        : 6 White LED  7.Touch chip                       : xpt2046    Interface Define: 24--GPIO7    --------> TP_CS 26--GPIO8    --------> LCD_CS 22--GPIO25  --------> TP_irq 23--GPIO11  --------> SPI_CLK 21--GPIO9    ---------> SPI_MISO 19--GPIO10 ---------> SPI_MOSI 5v           ---------> 5v GND      ---------> GND   HOW TO USE?(2 methods) 1.You can burn the image file to SD card . 2.Installation drive: The LCD screen and raspberry pie development board connected correctly copy the drive (LCD_show.tar.gz) to raspberry pi; Decompression file            tar -xzvf LCD_show.tar.gz Jump into the file                 cd  LCD-show update system            sudo apt-get update Install  driver              sudo ./LCD35_v1 then  after a few  seconds ,the system  will reboot if you want to  use the HDMI ,you can use this cmd  sudo ./LCD_hdmi Note: you must use this command sudo apt-mark hold raspberrypi-bootloader  before you update your system. Then use the command, sudo apt-get update  sudo apt-get upgrade  Otherwise it will fail after the restart Note:other  Pins  are  NC; Package includes  100% Brand New (High Quality)  1 x 3.5inch RPi LCD Touch Screen for Raspberry Pi 1 x Touch Screen pen

Directions

Similar products from Display Modules & Monitors

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies