Content on this page requires a newer version of Adobe Flash Player. The Following Items Are Included: 3M Dynatel 965DSP-B Basic Subscriber Loop Analyzer Software Version 7.00.9 (BC# 24801) No Options Test Leads Set AC Adapter/Charger Power Cord User Manual On CD-ROM Carrying Case BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! 3M Dynatel 965DSP-B Subscriber Loop Analyzer Basic Software Version 7.00.9 The 965DSP-B does not have the TDR function found in the 965DSP! The 3M Dynatel 965DSP Subscriber Loop Analyzer is a microprocessor-controlled integrated test set that provide full-featured POTS and fundamental ISDN testing. Includes Carrying Case & Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 90 Day Exchange Warranty The 3M Dynatel 965DSP Subscriber Loop Analyzer is a microprocessor-controlled integrated test set that provide full-featured POTS and fundamental ISDN testing. The functions include fault location and repair verification on twisted-pair, quad and coaxial cable (utilizing capacitance bridge, resistance bridge and Time Domain Reflectometer (TDR) functions). The Dynatel 965DSP subscriber loop analyzer executes a wide range of individual tests, or performs automatic test routines as specified by the user to categorize and sectionalize problems. Specific tests and measurements performed by the unit include: Voltage – detects and measures the presence of exchang or foreign DC or AC voltages. Tone – provides a test tone for conductor identification; user-selected tones from 1 to 40 kHz for transmission measurements. Current – measures DC loop current. Ohms – measures conductor and insulation resistance u to 1000 megohms. Resistance fault location – displays distance to fault. Opens – locates opens at distances up to 100,000 ft. (30 km). Splits – locates splits on paired cable. Ringer count – counts the number of ringers on a particular loop. Load coil count – indicates the presence of load coils in loop circuit. Wideband loss – loss measurements to 200 kHz for pre-qualifying ISDN and HDSL. Loss – measures voice band loss. Noise – measures noise metallic and noise to ground in dBrnc. Longitudinal balance – provides active measurement of line balance. Flexible, practical features The 965DSP subscriber loop analyzer is designed for functionality and ease of use. Features of the unit include: IR port - infrared port for downloading future software programs. Self-calibration – internal instrument calibration and setup procedures. Graphical user interface – user-friendly, icon-based display of test results. Replaceable five color-coded banana jacks for test connections. HELP function – an internal help menu provides information as needed during operation. Telephone – internal telephone or “talk set.” Rechargeable nickel metal hydride batteries – with battery charger, plus alkaline battery holder. Modular hardware and software design – for easy upgrades, investment protection. Backlit high resolution/high contrast LCD display. The Dynatel 965DSP test sets are housed in a lightweight, ergonomically designed case for portability and ease of use. The units are weather resistant and weigh only three pounds. Dynatel 965DSP Specifications: ANSI/ITU Standards Supported ITU G.992.2 (G.Lite), ITU G.992.1 (G.DMT), ANSI T1.413 Issue 2 ADSL Modes ANSI, G.DMT, G.Lite, MultiMode Reach Designed to synchronize at distances from 0 ft. to 18,000 ft. Statistics Actual and maximum upstream and downstream connect rates Upstream and downstream percent used ADSL line capacity Upstream and downstream noise margin Upstream and downstream signal attenuation Upstream and downstream power levels Modem manufacturer identification Upstream and downstream FEC, CRC, and HEC counts Alarm codes including LOS, LOF, LCD and LOM Graphical display of bits-per-bin count for the DMT signal Operating Modes Captured Modem auto-disconnects from the far-end after statistics gathered Continuous Modem gathers statistics for up to two minutes Electrical Specifications Main Functions Range Resolution Accuracy Voltage (DC) 0 to 99.9 V 100 to 300 V 0.1 V 1 V 1% ± 0.5 V 3% Voltage (AC) 0 to 99.9 V 100 to 250 V 0.1 V 1 V 1% ± 0.5 V 3% Current 0 to 59.9 mA 60 to 110 mA 0.1 mA 0.1 mA 1% ± 0.3 mA 2% Resistance (DC) with CO voltage 0 to 9999 O 0 to 9999 O 10 k to 99.9 kO 100 k to 999 kO 1 M to 9.9 MO 10 M to 99 MO 100 M to 990 MO 1 O 1 O 0.1 kO 1 kO 0.1 MO 1 MO 10 MO 1% ± 5 O 1% ± 50 O 1% 3% 3% 5% 10% Opens (no noise) 0 to 3,000 ft (0 to 1000 m) 3,000 to 10,000 ft (1 km to 3 km) 10,000 to 50,000 ft (3 km to 15 km) 50,000 to 100,000 ft (15 km to 30 km) 1 ft (1 m) 1 ft (1 m) 10 ft (10 m) 100 ft (100 m) 1% ± 3 ft 3% 5% 10% RFL Fault range Resistance to fault (no noise) 0 to 20 MO 0 to 99.99 O 100 to 999.9 O 1 kO to 7 kO — 0.01 O 0.1 O) 1.0 O — 0.1% of RTS ± 0.01 O 0.2% of RTS ± 0.01 O 1.0% of RTS ± 0.01 O Loss (& frequency) -40 to +10 dBm, 200 to 3000 Hz -40 to +10 dBm, 3000 to 9995 Hz -40 to +10 dBm, 10 k to 19.9 kHz 0.1 dB, 1 Hz 0.1 dB, 5 Hz 1 dB, 10 Hz 0.5 dB, 2 Hz 0.5 dB, 10 Hz 1 dB, 20 Hz Wideband loss -40 to +10 dBm, 20 k to 200 kHz 1 dB, 100 Hz 2 dB, 0.1 kHz Noise metallic 0 to 50 dBrnc (-90 to -40 dBm0p) 1 dB 2 dB Noise to ground 40 to 100 dBrnc (-50 to 10 dBm0p) 1 dB 2 dB Longitudinal balance 62 to 40 dB 1 dB 2 dB Tone output ID User defined User defined ISDN 200 to 1000 Hz, fixed level 200 to 9995 Hz, -20 to +1 dBm 10 k to 19.99 kHz, -20 to +1 dBm 40 kHz, +6 dBm fixed level 1 Hz 1 Hz, 0.1 dB 10 Hz, 1 dB — 1% 1% Hz, 0.2 dB 2% Hz, 1 dB 2%, 2 dB Dial mode DTMF, Pulse Standard Standard TDR Ranges Pulse width Velocity input Modes 3 ft–300 ft, 20 ft–1,000 ft, 50 ft–3,000 ft, 150 ft. 10,000 ft, 450 ft–30,000 ft (0–100 m, 5–300 m, 15–1,000m, 45–3,000 m, 140–10,000 m) 5 nS, 34 nS, 235 nS, 1600 nS 0.50 to 0.99 (150 to 299 uS/m) Single trace, dual trace, differential, memory, crosstalk 1 ft (1 m) Fixed values 0.01 (1 uS/m) — 0.6% range — — — ISDN Link test Error test Active/inactive Near-end & far-end block errors — 1 error — 1 error Auto Same specifications as full tests See above See above Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. UPS Ground United States USD 0.00 USPS Express Mail International (EMS) Worldwide USD 0.00 We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Powers Your Online Marketplace Make inventory management a breeze with Kyozou eBay Inventory Management Software
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
