+ Post new Ad
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 0
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 1
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 2
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 3
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 4
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 5
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 6
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 7
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 8
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 9
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 0
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 1
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 2
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 3
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 4
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 5
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 6
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 7
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 8
3R System Macro - Junior 150 mm Draw bar and Wrenches, US $699.00 – Picture 9

3r System Macro - Junior 150 Mm Draw Bar And Wrenches

US $699.00

  • Putnam, Ontario, Canada
  • Feb 22nd
Open on mobile:
QR code
System 3R Macro to Junior chuck adaptor . Gently used for EDM of small trim die components . The 3R system is a great time saver and great business investment in improvement . Time and energy placed into consistent electrode loading is greatly improved . The chuck comes with an anvil style drawbar for easy loading into your Macro base . It also comes with a torque wrench for loading the chuck and a long center wrench for loading junior coin electrode holders  to the adapter. New this set sells for over 2500us $ at 699us $ cost is 1/3 that of new . Adaptor Has slight wear in surface finish but will not effect the accuracy of the unit . A macro base and junior electrode coins will be required to use this set . Shipping will come with tracking number expedited shipping . Any Duty charges and or taxes involved entering the USA will be the sole responsibility of the buyer . Border crossing can also come with some delays until cleared by customs , this time frame is beyond my control .   
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Country/Region of Manufacture Sweden
Model 466.15033
Brand 3r

Directions

Similar products from Electrical Discharge Machine Tools

CHARMILLES BELT PULLER EDM WIRE SINKER ROBOFIL 290 310 200 100

CHARMILLES BELT PULLER EDM WIRE SINKER ROBOFIL 290 310 200 100

  • Anoka, Minnesota, United States
  • Feb 22nd
CHARMILLES SCALE EDM WIRE SINKER ROBOFIL 290 310 200 100

CHARMILLES SCALE EDM WIRE SINKER ROBOFIL 290 310 200 100

  • Anoka, Minnesota, United States
  • Feb 22nd
MACHINIST LATHE MILL System 3R Edm # 23 Mandrel in Wood Box

MACHINIST LATHE MILL System 3R Edm # 23 Mandrel in Wood Box

  • Morris Plains, New Jersey, United States
  • Feb 22nd
Brother HS3100 CNC wire edm, submerged, 2 axis, glass scale feedback

Brother HS3100 CNC wire edm, submerged, 2 axis, glass scale feedback

  • Des Plaines, Illinois, United States
  • Feb 22nd
EDM Hole Popper SDX10NC by Japax

EDM Hole Popper SDX10NC by Japax

  • Lehi, Utah, United States
  • Feb 22nd
MACHINIST LATHE MILL EDM System 3R Mounting Chuck ? ?

MACHINIST LATHE MILL EDM System 3R Mounting Chuck ? ?

  • Morris Plains, New Jersey, United States
  • Feb 22nd
100 Feet Of Gold Plated Nickel Wire .032 Dia Sigmund Cohn

100 Feet Of Gold Plated Nickel Wire .032 Dia Sigmund Cohn

  • Lenexa, Kansas, United States
  • Feb 22nd
E.D.M COPPER TUNGSTEN ELECTRODE MATERIAL NEW------- F-10

E.D.M COPPER TUNGSTEN ELECTRODE MATERIAL NEW------- F-10

  • Huntington Beach, California, United States
  • Feb 22nd
EROWA Combi System for ITS and Compact

EROWA Combi System for ITS and Compact

  • East New Market, Maryland, United States
  • Feb 22nd
EROWA Combi System for ITS and Compact WITH 5C Collet Holder

EROWA Combi System for ITS and Compact WITH 5C Collet Holder

  • East New Market, Maryland, United States
  • Feb 22nd
D-M-E Abrasive Stone/Sharpening Kit ASK-450 30+ stones HSH-400 Stone Holder

D-M-E Abrasive Stone/Sharpening Kit ASK-450 30+ stones HSH-400 Stone Holder

  • Crystal Lake, Illinois, United States
  • Feb 22nd
System 3R Ruler Kit for Wire EDM

System 3R Ruler Kit for Wire EDM

  • Lake Zurich, Illinois, United States
  • Feb 22nd
Brass Holders for EROWA ITS system USED

Brass Holders for EROWA ITS system USED

  • East New Market, Maryland, United States
  • Feb 22nd
Edm Wire CP Ti Gr1HP .011 Fort Wayne Metal 2 spools

Edm Wire CP Ti Gr1HP .011 Fort Wayne Metal 2 spools

  • Converse, Indiana, United States
  • Feb 21st
4 Spools Hitachi EDM Machine Wire HBZ-K0.006 20 KG./44.10LB total Size 0.006"

4 Spools Hitachi EDM Machine Wire HBZ-K0.006 20 KG./44.10LB total Size 0.006"

  • Mulberry, Arkansas, United States
  • Feb 21st
7 NEW GRAPHITE RETANGLE BLANKS MACHINABLE 3&3/8" X 8" X 5/8"

7 NEW GRAPHITE RETANGLE BLANKS MACHINABLE 3&3/8" X 8" X 5/8"

  • Fort Myers, Florida, United States
  • Feb 21st
ECD OVONICS RF SYNCHRONIZER 13.56MHz 25MW1-694-000 (4 OUTLETS)

ECD OVONICS RF SYNCHRONIZER 13.56MHz 25MW1-694-000 (4 OUTLETS)

  • United States
  • Feb 21st
Ex-Cell-o sinker EDM Odyssey IC-50 90 Amps peak

Ex-Cell-o sinker EDM Odyssey IC-50 90 Amps peak

  • Vancouver, Washington, United States
  • Feb 21st
Sinker EDM Holders 3R System Generic Set of 6!

Sinker EDM Holders 3R System Generic Set of 6!

  • Corona, California, United States
  • Feb 21st
Drill EDM Chuck w/Key Stainless Steel; JT0 Taper for EDM Drilling machines

Drill EDM Chuck w/Key Stainless Steel; JT0 Taper for EDM Drilling machines

  • Union City, California, United States
  • Feb 21st

People who viewed this item also vieved

NEW ATLAS CRAFTSMAN 9-12 INCH LATHE REPLACEMENT MILLING ATTACHMENT SCREW VISE

NEW ATLAS CRAFTSMAN 9-12 INCH LATHE REPLACEMENT MILLING ATTACHMENT SCREW VISE

  • Niles, Michigan, United States
  • Jan 30th
ATLAS CRAFTMAN 6 INCH SWING LATHE HEADSTOCK BELT 051-075 101.21200 3950 MODELS

ATLAS CRAFTMAN 6 INCH SWING LATHE HEADSTOCK BELT 051-075 101.21200 3950 MODELS

  • Niles, Michigan, United States
  • Jan 30th
VALENITE LATHE BORNG BAR BHP-NV-261-RH

VALENITE LATHE BORNG BAR BHP-NV-261-RH

  • Wadley, Alabama, United States
  • Jan 30th
NICE LOT OF 6 HSS ROUGH MILLING CUTTERS 2-1/2" WITH 1" BORE B.S

NICE LOT OF 6 HSS ROUGH MILLING CUTTERS 2-1/2" WITH 1" BORE B.S

  • Ellington, New York, United States
  • Jan 30th
LOT OF 4 DEVLIEG MICROBORE BORING HEADS W/ 40FC FLASH CHANGE SHANKS

LOT OF 4 DEVLIEG MICROBORE BORING HEADS W/ 40FC FLASH CHANGE SHANKS

  • Ellington, New York, United States
  • Jan 30th
LOT OF 3DEVLIEG MICROBORE & FACING & BORING HEADS W/ 40FC FLASH CHANGE SHANKS

LOT OF 3DEVLIEG MICROBORE & FACING & BORING HEADS W/ 40FC FLASH CHANGE SHANKS

  • Ellington, New York, United States
  • Jan 30th
PILE OF MACHINIST SPANNER WRENCHES WILLIAMS ADJUSTABLE FACE FIXED LATHE MILL

PILE OF MACHINIST SPANNER WRENCHES WILLIAMS ADJUSTABLE FACE FIXED LATHE MILL

  • Waterford, Michigan, United States
  • Feb 16th
BROWN AND SHARPE NO. 760 MAGNETIC CHUCK JIG FIXTURE MACHINIST TOOLING GRINDING

BROWN AND SHARPE NO. 760 MAGNETIC CHUCK JIG FIXTURE MACHINIST TOOLING GRINDING

  • Waterford, Michigan, United States
  • Feb 16th
BROWN AND SHARPE 750B V BLOCK MACHINIST JIG FIXTURE

BROWN AND SHARPE 750B V BLOCK MACHINIST JIG FIXTURE

  • Waterford, Michigan, United States
  • Feb 16th
DELTA MILWAUKEE 17" DRILL PRESS REAR BELT GUARD VERY EARLY DELTA

DELTA MILWAUKEE 17" DRILL PRESS REAR BELT GUARD VERY EARLY DELTA

  • Cheswick, Pennsylvania, United States
  • Feb 21st
IMMACULATE! JACOBS 44-02 44 SERIES 0 to 5/8 TAP TAPPING CHUCK W/ 1MT x 2JT SHANK

IMMACULATE! JACOBS 44-02 44 SERIES 0 to 5/8 TAP TAPPING CHUCK W/ 1MT x 2JT SHANK

  • Chino, California, United States
  • Feb 21st
1 1/8-7 tap set

1 1/8-7 tap set

  • Angola, New York, United States
  • Feb 21st
Kraft Tool Co. 5-1/2" x 3 Medium Bit Bronze Groove CF260

Kraft Tool Co. 5-1/2" x 3 Medium Bit Bronze Groove CF260

  • Bertrand, Nebraska, United States
  • Feb 21st
Kraft Tool Co. 6" x 6" Bronze Groover CF319

Kraft Tool Co. 6" x 6" Bronze Groover CF319

  • Bertrand, Nebraska, United States
  • Feb 21st
Kraft Tool Co. 6" x 4-1/2" Big Bit Bronze Groove CF304

Kraft Tool Co. 6" x 4-1/2" Big Bit Bronze Groove CF304

  • Bertrand, Nebraska, United States
  • Feb 21st
Magnavon Drill Bushing Type Strap Duplicator (Hole Finder) 8 Piece Set

Magnavon Drill Bushing Type Strap Duplicator (Hole Finder) 8 Piece Set

  • San Antonio, Texas, United States
  • Feb 24th
Magnavon Drill Bushing Type Strap Duplicator (Hole Finder) 10 Piece Set

Magnavon Drill Bushing Type Strap Duplicator (Hole Finder) 10 Piece Set

  • San Antonio, Texas, United States
  • Feb 24th
lockformer

lockformer

  • White Hall, Maryland, United States
  • Feb 24th
K5-J65 Sunnen Honing Stones

K5-J65 Sunnen Honing Stones

  • Prophetstown, Illinois, United States
  • Feb 25th
Sunnen K5-J85 Precision Honing Stones

Sunnen K5-J85 Precision Honing Stones

  • Prophetstown, Illinois, United States
  • Feb 25th
Sunnen K20A413 Honing Stones 5 Pieces NOS K20-A413

Sunnen K20A413 Honing Stones 5 Pieces NOS K20-A413

  • Grants Pass, Oregon, United States
  • Feb 25th
H & G CHASERS 100 SERIES SIZE 10-24 RIGHT HAND (1 SET 4 Pcs)

H & G CHASERS 100 SERIES SIZE 10-24 RIGHT HAND (1 SET 4 Pcs)

  • Cadiz, Kentucky, United States
  • Mar 5th
H & G CHASERS 100 SERIES SIZE 3/8"-16 RIGHT HAND (1 SET 4 Pcs)

H & G CHASERS 100 SERIES SIZE 3/8"-16 RIGHT HAND (1 SET 4 Pcs)

  • Cadiz, Kentucky, United States
  • Mar 5th
H & G CHASERS 108 DH HEAD SIZE 1.640"-18 RIGHT HAND (1 SET 5 Pcs)

H & G CHASERS 108 DH HEAD SIZE 1.640"-18 RIGHT HAND (1 SET 5 Pcs)

  • Cadiz, Kentucky, United States
  • Mar 5th
RONG FU AUTOMATIC POWER 9" x 16" IRON PIPE I BEAM BANDSAW MACHINE

RONG FU AUTOMATIC POWER 9" x 16" IRON PIPE I BEAM BANDSAW MACHINE

  • Chicago, Illinois, United States
  • May 17th
Doall 16" Model 36-3 vertical bandsaw band saw HVAC sheet metal machine

Doall 16" Model 36-3 vertical bandsaw band saw HVAC sheet metal machine

  • Chicago, Illinois, United States
  • May 17th
Vintage Wells Fargo and Co. Express San Francisco Edition Metal Lock with Key

Vintage Wells Fargo and Co. Express San Francisco Edition Metal Lock with Key

  • Chanute, Kansas, United States
  • May 18th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies