+ Post new Ad
(4 pc)-Solid Carbide QR: 10mm Head, 6mm Shank, 50mm OAL, 90 degrees, US $56.00 – Picture 0
(4 pc)-Solid Carbide QR: 10mm Head, 6mm Shank, 50mm OAL, 90 degrees, US $56.00 – Picture 1
(4 pc)-Solid Carbide QR: 10mm Head, 6mm Shank, 50mm OAL, 90 degrees, US $56.00 – Picture 2
(4 pc)-Solid Carbide QR: 10mm Head, 6mm Shank, 50mm OAL, 90 degrees, US $56.00 – Picture 3
(4 pc)-Solid Carbide QR: 10mm Head, 6mm Shank, 50mm OAL, 90 degrees, US $56.00 – Picture 0
(4 pc)-Solid Carbide QR: 10mm Head, 6mm Shank, 50mm OAL, 90 degrees, US $56.00 – Picture 1
(4 pc)-Solid Carbide QR: 10mm Head, 6mm Shank, 50mm OAL, 90 degrees, US $56.00 – Picture 2
(4 pc)-Solid Carbide QR: 10mm Head, 6mm Shank, 50mm OAL, 90 degrees, US $56.00 – Picture 3

(4 Pc)-solid Carbide Qr: 10mm Head, 6mm Shank, 50mm Oal, 90 Degrees

US $56.00

  • Grass Lake, Michigan, United States
  • Jan 30th
Open on mobile:
QR code
Quarter round engraving tool with a 90 degree included angle. This solid carbide engraving tool is designed for softer material that requires a deeper line. It's "head" is 10mm in diameter and the "shank" is reduced to 6mm. This allows the tool to be used in a machine that doesn't have a large spindle or collet. This also has a "balance flat" on the back of the head to offset the weight so the tool runs smooth. These tools are made in USA and are new-unused tools that are returns from a distributor. USA shipping only.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Country/Region of Manufacture United States
Quantity 10

Directions

Similar products from Other Cutting Equipment & Expendables

Made in USA 1/4, 3/8,1/2,5/8, 3/4, 1" x 90 Deg. 6 FL Carbide Countersink Set

Made in USA 1/4, 3/8,1/2,5/8, 3/4, 1" x 90 Deg. 6 FL Carbide Countersink Set

  • Hamden, Connecticut, United States
  • Jan 30th
4 Pcs. Made in USA 1/4, 1/2, 3/4, 1" x 90 Deg. 1 FLT Carbide Countersink Set

4 Pcs. Made in USA 1/4, 1/2, 3/4, 1" x 90 Deg. 1 FLT Carbide Countersink Set

  • Hamden, Connecticut, United States
  • Jan 30th
MACHINIST'S AIRCRAFT MECHANIC'S AIRCRAFT TOOLS MICROSTOP MICRO STOP COUNTERSINK

MACHINIST'S AIRCRAFT MECHANIC'S AIRCRAFT TOOLS MICROSTOP MICRO STOP COUNTERSINK

  • Golden Valley, Arizona, United States
  • Jan 30th
Scientific Cutting Tools TM170-20 Thread mill

Scientific Cutting Tools TM170-20 Thread mill

  • Spencer, Indiana, United States
  • Jan 30th
WELDON LGS12-2 COUNTERBORE 19/32 DIA. WITH 25/64 PILOT, 2-FLUTE

WELDON LGS12-2 COUNTERBORE 19/32 DIA. WITH 25/64 PILOT, 2-FLUTE

  • Mansfield, Ohio, United States
  • Jan 30th
Star/SU Finish Gear Hob 10 SP WD.19678 PMM4 TiN 1RH ClC 1.9985in, 5x23/4x11/4

Star/SU Finish Gear Hob 10 SP WD.19678 PMM4 TiN 1RH ClC 1.9985in, 5x23/4x11/4

  • Spencer, Indiana, United States
  • Jan 30th
30 Pcs Annular Cutter 1/2" x 1" + 10 Pcs Pilot Pin, #2080-2013x30+IBC0-0070x10

30 Pcs Annular Cutter 1/2" x 1" + 10 Pcs Pilot Pin, #2080-2013x30+IBC0-0070x10

  • TORONTO, ONTARIO, Canada
  • Jan 30th
30 Pcs Annular Cutter 5/8"x2" + 10 Pcs Pilot Pin, #2081-2015x30+IBC0-0090x10

30 Pcs Annular Cutter 5/8"x2" + 10 Pcs Pilot Pin, #2081-2015x30+IBC0-0090x10

  • TORONTO, ONTARIO, Canada
  • Jan 30th
30 Pcs Annular Cutter 15/16"x1" + 10 Pcs Pilot Pin, #2080-2020x30+IBC0-0070x10

30 Pcs Annular Cutter 15/16"x1" + 10 Pcs Pilot Pin, #2080-2020x30+IBC0-0070x10

  • TORONTO, ONTARIO, Canada
  • Jan 30th
30 Pcs Annular Cutter 9/16" x 1" + 10 Pcs Pilot Pin, #2080-2014x30+IBC0-0070x10

30 Pcs Annular Cutter 9/16" x 1" + 10 Pcs Pilot Pin, #2080-2014x30+IBC0-0070x10

  • TORONTO, ONTARIO, Canada
  • Jan 30th
2 NEW FULLERTON 1/4" (.250) SHANK CARBIDE BURRS. SL-4 3 DOUBLE CUT USA MADE E204

2 NEW FULLERTON 1/4" (.250) SHANK CARBIDE BURRS. SL-4 3 DOUBLE CUT USA MADE E204

  • Mentor, Ohio, United States
  • Jan 30th
10 NEW 1/8" SHANK CARBIDE BURRS. LONGS. DRILL POINT. MADE IN USA (A325)

10 NEW 1/8" SHANK CARBIDE BURRS. LONGS. DRILL POINT. MADE IN USA (A325)

  • Mentor, Ohio, United States
  • Jan 30th
1 NEW FULLERTON 1/4" (.250) SHANK CARBIDE BURR. SL-4 3. DOUBLE CUT USA MADE E203

1 NEW FULLERTON 1/4" (.250) SHANK CARBIDE BURR. SL-4 3. DOUBLE CUT USA MADE E203

  • Mentor, Ohio, United States
  • Jan 30th
Port contour cutter set 1" 5/16"-12

Port contour cutter set 1" 5/16"-12

  • Two Harbors, Minnesota, United States
  • Jan 30th
MITSUBISHI 6.30" FACEMILL SE400R0608F NEW

MITSUBISHI 6.30" FACEMILL SE400R0608F NEW

  • Spencer, Indiana, United States
  • Jan 30th
Mitsubishi Face Mill FBP415R0514E includes 14 Inserts

Mitsubishi Face Mill FBP415R0514E includes 14 Inserts

  • Spencer, Indiana, United States
  • Jan 30th
Mitsubishi Face Mill FBP415R0514E holds 14 Inserts

Mitsubishi Face Mill FBP415R0514E holds 14 Inserts

  • Spencer, Indiana, United States
  • Jan 30th
Large Lot (125+ pcs.) of Machinist's Cutting Bit Tools (var. sizes & condition )

Large Lot (125+ pcs.) of Machinist's Cutting Bit Tools (var. sizes & condition )

  • Middletown, Ohio, United States
  • Jan 30th
V-Coil NC 1-1/8" Coil Thread Insert Repair Kit

V-Coil NC 1-1/8" Coil Thread Insert Repair Kit

  • Boaz, Alabama, United States
  • Jan 30th
1/2" SHANK WHITNEY MFG CO 1/4" A-8 HS WOODRUFF KEYSEAT KEYWAY CUTTER LATHE TOOL

1/2" SHANK WHITNEY MFG CO 1/4" A-8 HS WOODRUFF KEYSEAT KEYWAY CUTTER LATHE TOOL

  • United States
  • Jan 30th

People who viewed this item also vieved

*** FREE SHIPPING *** WALTER LPMT 15T308R-D51 WXP 45 50pcs

*** FREE SHIPPING *** WALTER LPMT 15T308R-D51 WXP 45 50pcs

  • Beograd, Serbia
  • Mar 8th
* SHIPPING IS FREE * MITSUBISHI CNMG 120408-GJ VP15TF 20pcs

* SHIPPING IS FREE * MITSUBISHI CNMG 120408-GJ VP15TF 20pcs

  • Beograd, Serbia
  • Mar 8th
50 PCS YG1 2 FLUTE SOLID CARBIDE 1/8 DIAMETER END MILL X 1/2 LOC X 1-1/2 CNC BIT

50 PCS YG1 2 FLUTE SOLID CARBIDE 1/8 DIAMETER END MILL X 1/2 LOC X 1-1/2 CNC BIT

  • Huntington Beach, California, United States
  • Mar 10th
Lot of 50 Machinist End Mills- Cleveland Melin Tool Fastcut Various Sizes

Lot of 50 Machinist End Mills- Cleveland Melin Tool Fastcut Various Sizes

  • Fort Myers, Florida, United States
  • Mar 10th
NOS! Cleveland #6 TAPER PIN REAMER, 1/4" SQUARE DRIVE

NOS! Cleveland #6 TAPER PIN REAMER, 1/4" SQUARE DRIVE

  • Bremen, Indiana, United States
  • Mar 27th
NOS! Cleveland #4 TAPER PIN REAMER, 3/16" SQUARE DRIVE

NOS! Cleveland #4 TAPER PIN REAMER, 3/16" SQUARE DRIVE

  • Bremen, Indiana, United States
  • Mar 27th
Automator Model MB32 Impact Press - Hand Controlled

Automator Model MB32 Impact Press - Hand Controlled

  • Brownsburg, Indiana, United States
  • May 29th
Black & Decker Electric Tool Nibbler Cutting Dies Shear Blade Cutter Kit 33088

Black & Decker Electric Tool Nibbler Cutting Dies Shear Blade Cutter Kit 33088

  • Romulus, Michigan, United States
  • May 30th
One, Sumitomo Insert CNMA 432 S0242 BN700, 120408

One, Sumitomo Insert CNMA 432 S0242 BN700, 120408

  • Lake Village, Indiana, United States
  • May 27th
Stellram DNMG 150408 - SY SA9608 Ceramic Inserts **10 Inserts**

Stellram DNMG 150408 - SY SA9608 Ceramic Inserts **10 Inserts**

  • Houston, Texas, United States
  • May 27th
Diamond Blade, Continuous Rim for Bridge Saw, 300mm (approx.12”) x 2.8mm x 60mm

Diamond Blade, Continuous Rim for Bridge Saw, 300mm (approx.12”) x 2.8mm x 60mm

  • Tucson, Arizona, United States
  • May 28th
ULTRA HSS HOLE SAWS, SC67, 67mm, 2"5/8

ULTRA HSS HOLE SAWS, SC67, 67mm, 2"5/8

  • Athens, default, Greece
  • May 28th
ROSAN INC. RFOPB-5016-HDC

ROSAN INC. RFOPB-5016-HDC

  • Shelby, North Carolina, United States
  • Jun 2nd
ROSAN INC. RFOPB 5014 HDC

ROSAN INC. RFOPB 5014 HDC

  • Shelby, North Carolina, United States
  • Jun 2nd
5x HSS and Soldered Carbide Lathe Tool Bits, various sizes FREE SHIPPING

5x HSS and Soldered Carbide Lathe Tool Bits, various sizes FREE SHIPPING

  • Bethlehem, Pennsylvania, United States
  • Jun 9th
Brand New Big Lot of Hougen Rotabroach Cutters with Blair 11122 and 11007 Arbor

Brand New Big Lot of Hougen Rotabroach Cutters with Blair 11122 and 11007 Arbor

  • Green Bay, Wisconsin, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies