400 Holes Semi-Automatic Capsule Filling Filler Capsule Machine Size "0" 0#, US $750 – Picture 0

400 Holes Semi-Automatic Capsule Filling Filler Capsule Machine Size "0" 0#, US $750 – Picture 1

400 Holes Semi-Automatic Capsule Filling Filler Capsule Machine Size "0" 0#, US $750 – Picture 2

400 Holes Semi-Automatic Capsule Filling Filler Capsule Machine Size "0" 0#, US $750 – Picture 3

400 Holes Semi-Automatic Capsule Filling Filler Capsule Machine Size "0" 0#, US $750 – Picture 4

400 Holes Semi-Automatic Capsule Filling Filler Capsule Machine Size "0" 0#, US $750 – Picture 5

400 Holes Semi-automatic Capsule Filling Filler Capsule Machine Size "0" 0#

US $750

El Monte, California, United States
Jan 31st

Open on mobile:
QR code

Label Rewinder Machine Capsule Filling Machine The 400 holes GMP model manually operated hard gelatin capsule filling machine is the most widely used machine of its kind in the pharmaceutical industries. This machine is small and reliable for small units. Speedy and efficient operations are assured from numerous improvements introduced over many years of its wide and varied application in industry. With this capsule machine it's easy to turn powders into easy to swallow capsules. Fill your capsules with any powdered herbs, food supplements, vitamins, oils, or your own custom formulas. This is an economical and convenient way to take strong tasting herbs and avoid table binders and fillers which are commonly added to store-bought herbs. Fill custom herb and vitamin mixtures. Instruction Tamping Tool Body board Parameters Item No. JNB-400 Qualified Rate >=99% Production Capacity 400 pcs/time (20X20) Output 800-1000pcs/h Precision R 0.05mm Screw Material Stainless Steel Capsule Size 0# Capsule Filling Video Instruction Frame board Cap board Middle board Scraping board Operations 1.First lay the body board flat, then place the frame board on the body board (Note: Two diagonal positioning screws on the frame board must be aligned with the positioning holes on the body board) and then put about 150 body capsules into the frame (Long capsules are called "body capsules" while short capsules are called "cap capsules") After this, swing the body board and frame body together from side to side, and the capsules into the body board. After the body board is full, take out the frame board, and pour some redundant capsules into the capsule bad. For those capsules with incorrect direction in the body board, it is necessary to adjust their direction (Put the mouth of a body capsule facing the capsule with incorrect direction, and press to get capsule with incorrect direction, and press to get capsule with incorrect direction out). In terms of arrangement operation, cap capsules are the same as body capsules. 2.After the body board is filled with capsules, fill the powder. After placing the powder on the body board, scrape back and forth with the powder scraping board. When the capsule is filled with powder, the redundant powder on the body board is scraped off (If the powder is not sufficient in amount, after vibrating the body board, refill the powder or press with the powder pressing board.) 3.Place the middle board on the cap board with its unnotched side aligned properly. And also the cap "mouth" shall be laid higher than the board so that it can enter the hole of the middle board, and the flip over 180 degrees, and press slightly on the body board after the alignment. If the cap "mouth" of the capsule is slightly combined with the opening of the body board, the operator can press hard. Until he/she presses it to the bottom, he/she removes the cap board and middle board and pours out the sealed capsules from the middle board. Item Included: 1 Set of 0# Capsule filling machine 400 (150012) 1) Frame board 2) Body board 3) Tamping Tool 4) Scraping board 5) Cap board 6) Middle board