+ Post new Ad
52 INCH 16ga Mild Steel PEXTO power PINCH ROLLER, US $15000 – Picture 0
52 INCH 16ga Mild Steel PEXTO power PINCH ROLLER, US $15000 – Picture 0

52 Inch 16ga Mild Steel Pexto Power Pinch Roller

US $15000

  • Mount Holly, North Carolina, United States
  • Jun 12th
Open on mobile:
QR code
This is a very nice Power 52" 16ga Mild Steel Pexto Sheet Metal roller, was used on light Alum at US Airways. Its mounted on a factory stand. Rolls was greased before putting in storage.  3 phase power required for the machine. We have no need for these anymore and trying to make room in the shop. This machine is for sale local so I  could  have to end auction early if purchased local.  Shipping: I will load the machine onto buyers truck for FREE. All shipping cost will be arranged by the buyer if the machine has to be shipped. I will only load the machine. Buyer assumes all responsibility for the machine once it is loaded.  The machine is sold as is, all though it is in good working condition there is no warranty given with the machine when it is purchased.  You may come buy and inspect the machine and see it run if you would like to. Just make arrangement ahead of time.  For Question you can call Todd at 704 263 4461

Directions

Similar products from Tools for Fabrication Equipment

ISB PULSE AIR/ AIR EJECTION SYSTEM

ISB PULSE AIR/ AIR EJECTION SYSTEM

  • Lakeland, Minnesota, United States
  • Jun 12th
Vintage Ridgid Number 24 Bench Yolk Vise

Vintage Ridgid Number 24 Bench Yolk Vise

  • Jacksonville, Florida, United States
  • Jun 12th
Vintage Whitney No. 38 Metal Shear Cast Iron Hand Operated Pexto Roper

Vintage Whitney No. 38 Metal Shear Cast Iron Hand Operated Pexto Roper

  • Landenberg, Pennsylvania, United States
  • Jun 12th
WEDGELOCK CLECO PLIERS REFURB'd

WEDGELOCK CLECO PLIERS REFURB'd

  • Molena, Georgia, United States
  • Jun 12th
DELTA ROCKWELL DRILL PRESS CUTLER HAMMER THERMAL OVERLOAD SWITCH Used

DELTA ROCKWELL DRILL PRESS CUTLER HAMMER THERMAL OVERLOAD SWITCH Used

  • Shrewsbury, Massachusetts, United States
  • Jun 12th
Power Gage

Power Gage

  • Bellevue, Kentucky, United States
  • Jun 12th
ATI518TA NUTPLATE JIG #10 MINI CORNER

ATI518TA NUTPLATE JIG #10 MINI CORNER

  • Molena, Georgia, United States
  • Jun 12th
Jet JRD-700 Radial Arm Drill

Jet JRD-700 Radial Arm Drill

  • Mount Holly, North Carolina, United States
  • Jun 12th
SPELLMACO TRANSFER PUNCHES WITH CASE STEAMPUNK METAL WORKING TOOLS

SPELLMACO TRANSFER PUNCHES WITH CASE STEAMPUNK METAL WORKING TOOLS

  • Amesville, Ohio, United States
  • Jun 12th
120 INCH 10 FOOT BODY CRAFT/PEXTO MANUAL PINCH ROLLER made for NASCAR

120 INCH 10 FOOT BODY CRAFT/PEXTO MANUAL PINCH ROLLER made for NASCAR

  • Mount Holly, North Carolina, United States
  • Jun 12th
0.1345" Thickness 96" W Baileigh BB-9610H FINGER BRAKE, 2piece finger assortment

0.1345" Thickness 96" W Baileigh BB-9610H FINGER BRAKE, 2piece finger assortment

  • Harrison, New Jersey, United States
  • Jun 11th
0.1046" Thickness 96" W Baileigh BB-9612H FINGER BRAKE, 220V; 3ph; 22-finger ass

0.1046" Thickness 96" W Baileigh BB-9612H FINGER BRAKE, 220V; 3ph; 22-finger ass

  • Harrison, New Jersey, United States
  • Jun 11th
0.1345" Thickness 72" W Baileigh BB-7210H FINGER BRAKE, 220V; 3ph; 17-finger ass

0.1345" Thickness 72" W Baileigh BB-7210H FINGER BRAKE, 220V; 3ph; 17-finger ass

  • Harrison, New Jersey, United States
  • Jun 11th
0.1345" Thickness 48" W Baileigh BB-4810H FINGER BRAKE, 220V; 3ph; 11-finger ass

0.1345" Thickness 48" W Baileigh BB-4810H FINGER BRAKE, 220V; 3ph; 11-finger ass

  • Harrison, New Jersey, United States
  • Jun 11th
0.0598" Thickness 96" W Baileigh BB-9616M FINGER BRAKE, magnetic clamping brake;

0.0598" Thickness 96" W Baileigh BB-9616M FINGER BRAKE, magnetic clamping brake;

  • Harrison, New Jersey, United States
  • Jun 11th
0.0598" Thickness 72" W Baileigh BB-7216M FINGER BRAKE, magnetic clamping brake;

0.0598" Thickness 72" W Baileigh BB-7216M FINGER BRAKE, magnetic clamping brake;

  • Harrison, New Jersey, United States
  • Jun 11th
14Ga Thickness 50" W Baileigh BB-5014F FINGER BRAKE, foot operated material clam

14Ga Thickness 50" W Baileigh BB-5014F FINGER BRAKE, foot operated material clam

  • Harrison, New Jersey, United States
  • Jun 11th
12Ga Thickness 40" W Baileigh BB-4012F FINGER BRAKE, foot operated material clam

12Ga Thickness 40" W Baileigh BB-4012F FINGER BRAKE, foot operated material clam

  • Harrison, New Jersey, United States
  • Jun 11th
22Ga Thickness 157" W Baileigh BB-15722 FINGER BRAKE, 2-piece hardened finger as

22Ga Thickness 157" W Baileigh BB-15722 FINGER BRAKE, 2-piece hardened finger as

  • Harrison, New Jersey, United States
  • Jun 11th
18Ga Thickness 144" W Baileigh BB-14418 FINGER BRAKE, 2piece hardened finger ass

18Ga Thickness 144" W Baileigh BB-14418 FINGER BRAKE, 2piece hardened finger ass

  • Harrison, New Jersey, United States
  • Jun 11th

People who viewed this item also vieved

BALAS #10 ROUND COLLET 11/64"

BALAS #10 ROUND COLLET 11/64"

  • Fox Lake, Illinois, United States
  • Jan 30th
BALAS #10 ROUND COLLET 5/16"

BALAS #10 ROUND COLLET 5/16"

  • Fox Lake, Illinois, United States
  • Jan 30th
BALAS #10 ROUND COLLET 7/16"

BALAS #10 ROUND COLLET 7/16"

  • Fox Lake, Illinois, United States
  • Jan 30th
JONES & LAMSON DIE HEAD 22S-23S W/ 1-3/4" SHANK 1/4 20 CHASERS AUTO THREADING

JONES & LAMSON DIE HEAD 22S-23S W/ 1-3/4" SHANK 1/4 20 CHASERS AUTO THREADING

  • DeKalb, Illinois, United States
  • Jan 30th
Wilton Multi Spindle Drilling and Tapping Machine All 6 drills are Wilton VSG20

Wilton Multi Spindle Drilling and Tapping Machine All 6 drills are Wilton VSG20

  • Orange, California, United States
  • Jan 30th
VALENITE V40M-10SG MILL TOOL HOLDER 40 TAPER W/ .500 COLLET

VALENITE V40M-10SG MILL TOOL HOLDER 40 TAPER W/ .500 COLLET

  • Collinsville, Oklahoma, United States
  • Jan 30th
System 3R EDM Touch Off Locating Tooling Checking Bar 8370-089

System 3R EDM Touch Off Locating Tooling Checking Bar 8370-089

  • Cochranton, Pennsylvania, United States
  • Jan 30th
6" System 3R Chuck

6" System 3R Chuck

  • Westland, Michigan, United States
  • Jan 30th
CHARMILLES I/O BOARD

CHARMILLES I/O BOARD

  • Anoka, Minnesota, United States
  • Jan 30th
Sunnen stones P20-A47

Sunnen stones P20-A47

  • Ware, Massachusetts, United States
  • Jan 30th
Sunnen P28J85 honing stones

Sunnen P28J85 honing stones

  • Milwaukee, Wisconsin, United States
  • Jan 30th
Sunnen honing mandrel L8-285AS

Sunnen honing mandrel L8-285AS

  • Ware, Massachusetts, United States
  • Jan 30th
Alexander Model 2CG Cutter Grinder

Alexander Model 2CG Cutter Grinder

  • Woodland, Washington, United States
  • Jan 30th
MILWAUKEE 7"/ 9" GRINDER VERY NICE

MILWAUKEE 7"/ 9" GRINDER VERY NICE

  • Orr, Minnesota, United States
  • Jan 30th
Fischer Precise SC53-L Motor Type-SC Milling Drilling 10000 - 35000 RPM

Fischer Precise SC53-L Motor Type-SC Milling Drilling 10000 - 35000 RPM

  • San Jose, California, United States
  • Jan 30th
Lathe Saddle Carriage Lock - Logan 14?

Lathe Saddle Carriage Lock - Logan 14?

  • Keller, Texas, United States
  • Jan 30th
3 Pratt Whitney Thread Cleaning Chasing Threading Tool Metal Lathe Machinist

3 Pratt Whitney Thread Cleaning Chasing Threading Tool Metal Lathe Machinist

  • Long Beach, California, United States
  • Jan 30th
STEADY REST FOR A 21" LATHE 14" thru

STEADY REST FOR A 21" LATHE 14" thru

  • Coloma, Wisconsin, United States
  • Jan 30th
Rotary Cutter SR Plastic 3M No.3, SR, 0.4x0.9750, PK40 B2814R

Rotary Cutter SR Plastic 3M No.3, SR, 0.4x0.9750, PK40 B2814R

  • Danville, Virginia, United States
  • Jan 30th
TSD MICROBORE MILLING TOOL INSERT 3A2F #3704E1E approx.1" long

TSD MICROBORE MILLING TOOL INSERT 3A2F #3704E1E approx.1" long

  • Hawthorne, New Jersey, United States
  • Jan 30th
USED INVOLUTE GEAR CUTTER #5 8P 21-25T 1"bore Brown & Sharpe

USED INVOLUTE GEAR CUTTER #5 8P 21-25T 1"bore Brown & Sharpe

  • Kelly, North Carolina, United States
  • Jan 30th
Atlas 10" & 12" Lathe - Mitre Gear w/ Bolt / OC 35

Atlas 10" & 12" Lathe - Mitre Gear w/ Bolt / OC 35

  • Long Beach, California, United States
  • Jan 30th
Malco PL1 Metal Stud Crimper

Malco PL1 Metal Stud Crimper

  • Elizaville, New York, United States
  • Jan 30th
USED WYSONG 6' x 1/4" Mechanical Shear

USED WYSONG 6' x 1/4" Mechanical Shear

  • Watertown, Connecticut, United States
  • Jan 30th
20" Thrt 12" H Roll-In J20W VERTICAL BAND SAW, Vari-Speed, Gravity Tbl Feed, 1"

20" Thrt 12" H Roll-In J20W VERTICAL BAND SAW, Vari-Speed, Gravity Tbl Feed, 1"

  • Harrison, New Jersey, United States
  • Jan 30th
16" W 9" H Kalamazoo H9AW HORIZONTAL BAND SAW, Made in USA, stock stop, coolant

16" W 9" H Kalamazoo H9AW HORIZONTAL BAND SAW, Made in USA, stock stop, coolant

  • Harrison, New Jersey, United States
  • Jan 30th
13" W 12" H DoAll C-1213A HORIZONTAL BAND SAW, Auto- Feed, 1-1/4" Blade, 5 HP,

13" W 12" H DoAll C-1213A HORIZONTAL BAND SAW, Auto- Feed, 1-1/4" Blade, 5 HP,

  • Harrison, New Jersey, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies