+ Post new Ad
6" BACKING Back PLATE With D1-4 MOUNT LATHE Chuck, US $320 – Picture 0
6" BACKING Back PLATE With D1-4 MOUNT LATHE Chuck, US $320 – Picture 1
6" BACKING Back PLATE With D1-4 MOUNT LATHE Chuck, US $320 – Picture 2
6" BACKING Back PLATE With D1-4 MOUNT LATHE Chuck, US $320 – Picture 3
6" BACKING Back PLATE With D1-4 MOUNT LATHE Chuck, US $320 – Picture 4
6" BACKING Back PLATE With D1-4 MOUNT LATHE Chuck, US $320 – Picture 5
6" BACKING Back PLATE With D1-4 MOUNT LATHE Chuck, US $320 – Picture 0
6" BACKING Back PLATE With D1-4 MOUNT LATHE Chuck, US $320 – Picture 1
6" BACKING Back PLATE With D1-4 MOUNT LATHE Chuck, US $320 – Picture 2
6" BACKING Back PLATE With D1-4 MOUNT LATHE Chuck, US $320 – Picture 3
6" BACKING Back PLATE With D1-4 MOUNT LATHE Chuck, US $320 – Picture 4
6" BACKING Back PLATE With D1-4 MOUNT LATHE Chuck, US $320 – Picture 5

6" Backing Back Plate With D1-4 Mount Lathe Chuck

US $320

  • Dunlap, Illinois, United States
  • Feb 22nd
Open on mobile:
QR code
This is a back plate for a lathe chuck with quick release studs also known as D1-4 mounts. sold as is pins measure 0.625 inch diameter center hole is 2.43 inch diameter

Directions

Similar products from Fittings & Plates

MACHINIST TOOLS LATHE MILL Micro Ground Hardened Angle Plate Fixture Sherline

MACHINIST TOOLS LATHE MILL Micro Ground Hardened Angle Plate Fixture Sherline

  • Morris Plains, New Jersey, United States
  • Feb 22nd
5” DIVIDING HEAD INDEXING PLATE for 37, 39, 41, 43, 47, 49 with 1-1/8" Center

5” DIVIDING HEAD INDEXING PLATE for 37, 39, 41, 43, 47, 49 with 1-1/8" Center

  • Escondido, California, United States
  • Feb 22nd
Suburban Tool Inc V Step Angle Plate Machinist Tool AP445

Suburban Tool Inc V Step Angle Plate Machinist Tool AP445

  • Jonesboro, Arkansas, United States
  • Feb 22nd
MACHINIST MILL LATHE TOOL NICE Tool Makers Ground Hardened Set Up V Block

MACHINIST MILL LATHE TOOL NICE Tool Makers Ground Hardened Set Up V Block

  • Morris Plains, New Jersey, United States
  • Feb 22nd
MACHINIST MILL LATHE TOOL NICE Hardened Set Up Block for Milling Machine

MACHINIST MILL LATHE TOOL NICE Hardened Set Up Block for Milling Machine

  • Morris Plains, New Jersey, United States
  • Feb 22nd
MACHINIST MILL LATHE TOOL LARGe NICE Hardened Set Up Block for Milling

MACHINIST MILL LATHE TOOL LARGe NICE Hardened Set Up Block for Milling

  • Morris Plains, New Jersey, United States
  • Feb 22nd
TSK 320 index angle head 12.5 rotating table. angle plate

TSK 320 index angle head 12.5 rotating table. angle plate

  • Newark, New York, United States
  • Feb 22nd
HAAS 5C ROTARY SERVO INDEXING FIXTURE

HAAS 5C ROTARY SERVO INDEXING FIXTURE

  • Ellington, New York, United States
  • Feb 22nd
6" x 6" PRECISION SINE PLATE FIXTURE W/ TAPPED TABLE

6" x 6" PRECISION SINE PLATE FIXTURE W/ TAPPED TABLE

  • Ellington, New York, United States
  • Feb 22nd
PRECISION 5C COLLET INDEXING FIXTURE HZ VT W HARDINGE COLLET

PRECISION 5C COLLET INDEXING FIXTURE HZ VT W HARDINGE COLLET

  • Ellington, New York, United States
  • Feb 22nd
Hardinge Model C24-D Back Plate Fixture Threaded Mount

Hardinge Model C24-D Back Plate Fixture Threaded Mount

  • Rochester, New York, United States
  • Feb 22nd
8" Diameter Face Plate for a Metal Lathe Unknown Make & Model

8" Diameter Face Plate for a Metal Lathe Unknown Make & Model

  • Tijeras, New Mexico, United States
  • Feb 18th
8", 4 JAW CHUCK FOR A LABLOND LATHE, L0 BACK

8", 4 JAW CHUCK FOR A LABLOND LATHE, L0 BACK

  • Pinellas Park, Florida, United States
  • Feb 18th
TOMBSTONE; T-TYPE STEEL HORIZONTAL CNC FIXTURE

TOMBSTONE; T-TYPE STEEL HORIZONTAL CNC FIXTURE

  • Minneapolis, Minnesota, United States
  • Feb 18th
20 Pc Metric R8 Collet Set 3mm to 20mm High Precison for Bridgeport 20 Piece

20 Pc Metric R8 Collet Set 3mm to 20mm High Precison for Bridgeport 20 Piece

  • Huntington Beach, California, United States
  • Feb 18th
Swing Bolts 3/8", 1/2", Latch Bolt & Cam handles 1/4" 20 8 Total pieces

Swing Bolts 3/8", 1/2", Latch Bolt & Cam handles 1/4" 20 8 Total pieces

  • Milwaukee, Wisconsin, United States
  • Feb 18th
Jacks, (3) Machinist / Toolmaker Set Up Swivel Screw Jacks, Working Condition

Jacks, (3) Machinist / Toolmaker Set Up Swivel Screw Jacks, Working Condition

  • Saunderstown, Rhode Island, United States
  • Feb 18th
R8 Collet Rack with 12 slots for Bridgeport High Precision

R8 Collet Rack with 12 slots for Bridgeport High Precision

  • Huntington Beach, California, United States
  • Feb 18th
8 Pc R8 Collet Set 1/8" to 1" for Bridgeport with R8 Collet Rack - 12 slot

8 Pc R8 Collet Set 1/8" to 1" for Bridgeport with R8 Collet Rack - 12 slot

  • Huntington Beach, California, United States
  • Feb 18th
Bison 7-875-064 Backplate Adapter for 3 & 6 Jaw Truchucks & Spindle Noses 6-1/4"

Bison 7-875-064 Backplate Adapter for 3 & 6 Jaw Truchucks & Spindle Noses 6-1/4"

  • Roanoke, Virginia, United States
  • Feb 18th

People who viewed this item also vieved

LOT OF 6 ASSORTED 5C COLLETS 1/8" TO 1/2" CAPACITY

LOT OF 6 ASSORTED 5C COLLETS 1/8" TO 1/2" CAPACITY

  • La Puente, California, United States
  • Jan 30th
6 PIECE LOT OF 5C 5 C COLLETS 13/64" TO 1-1/32" SIZE RANGE

6 PIECE LOT OF 5C 5 C COLLETS 13/64" TO 1-1/32" SIZE RANGE

  • La Puente, California, United States
  • Jan 30th
ASSORTED LOT OF 5C 5 C EXPANDING COLLET SET w/ MASTER

ASSORTED LOT OF 5C 5 C EXPANDING COLLET SET w/ MASTER

  • La Puente, California, United States
  • Jan 30th
Brand New Black Oxide Finish Tee Nut M8 To Suit 10 Mm Slot - Lot of 5

Brand New Black Oxide Finish Tee Nut M8 To Suit 10 Mm Slot - Lot of 5

  • New Delhi, India
  • Feb 17th
12 PIECE LOT OF C CLAMPS 2" & 4" CAPACITY CINCINNATI & OTHER BRANDS

12 PIECE LOT OF C CLAMPS 2" & 4" CAPACITY CINCINNATI & OTHER BRANDS

  • Los Alamos, California, United States
  • Feb 17th
Vintage Machinists Parallel Clamp ~ Metalworking Tool

Vintage Machinists Parallel Clamp ~ Metalworking Tool

  • Staten Island, New York, United States
  • Feb 17th
Columbian No, 504-1/2, Vise,4-1/2" wide Machinist jaws,fixed base,good condition

Columbian No, 504-1/2, Vise,4-1/2" wide Machinist jaws,fixed base,good condition

  • Cocoa, Florida, United States
  • Feb 17th
VINTAGE 1930 CHAS A.PARKER NO.202 SWIVEL BASE BENCH VISE Meriden, Connecticut

VINTAGE 1930 CHAS A.PARKER NO.202 SWIVEL BASE BENCH VISE Meriden, Connecticut

  • Dayton, Ohio, United States
  • Feb 17th
Milwaukee m Spector 360

Milwaukee m Spector 360

  • Sacramento, California, United States
  • Feb 17th
Dead Center Lot Taper Metal Lathe Machinist Tool

Dead Center Lot Taper Metal Lathe Machinist Tool

  • Sandusky, Ohio, United States
  • Feb 18th
MT5 & MT6 DEAD CENTER LATHE MACHINIST TOOLS

MT5 & MT6 DEAD CENTER LATHE MACHINIST TOOLS

  • Naperville, Illinois, United States
  • Feb 18th
NEW UNUSED LIVE CENTER FOR MT2 & MT1 TO MT2 SLEEVE ARBOR LATHE MACHINIST TOOL

NEW UNUSED LIVE CENTER FOR MT2 & MT1 TO MT2 SLEEVE ARBOR LATHE MACHINIST TOOL

  • United States
  • Feb 18th
Original Craftsman 4 Jaw Lathe Chuck 1-1/2" - 8 tpi 6" # 1111706

Original Craftsman 4 Jaw Lathe Chuck 1-1/2" - 8 tpi 6" # 1111706

  • Punta Gorda, Florida, United States
  • Feb 18th
MASTERMAN Jaw Square Aluminum Tongue & Groove 6" x 3" A6EH Set of 3 |LV2|

MASTERMAN Jaw Square Aluminum Tongue & Groove 6" x 3" A6EH Set of 3 |LV2|

  • Saint Louis, Missouri, United States
  • Feb 18th
JACOBS SUPER CHUCK 16N CAT 40 TOOL HOLDER

JACOBS SUPER CHUCK 16N CAT 40 TOOL HOLDER

  • Chicago, Illinois, United States
  • Feb 18th
TORNOS R10 REVOLVING GUIDE BUSHING 5/16

TORNOS R10 REVOLVING GUIDE BUSHING 5/16

  • San Antonio, Texas, United States
  • Mar 5th
Starrett No. 255 20.5" Vernier Height Gage/ box not included

Starrett No. 255 20.5" Vernier Height Gage/ box not included

  • Bethalto, Illinois, United States
  • Mar 5th
35" x 16" Steel T Slotted Table Layout Mazak VQC-15 w Ball Screw

35" x 16" Steel T Slotted Table Layout Mazak VQC-15 w Ball Screw

  • Grand Rapids, Michigan, United States
  • Mar 5th
Tool maker precition angle plate.5 1/4 x 3.5 x 3.00

Tool maker precition angle plate.5 1/4 x 3.5 x 3.00

  • Statesville, North Carolina, United States
  • Jun 12th
Tool maker 6 " long 90 deg. Magnetic V block.

Tool maker 6 " long 90 deg. Magnetic V block.

  • Statesville, North Carolina, United States
  • Jun 12th
Tool maker precision punch ,rod holder V block.

Tool maker precision punch ,rod holder V block.

  • Statesville, North Carolina, United States
  • Jun 12th
Hass HR 210 Forth Axis Metalworking Rottary Table

Hass HR 210 Forth Axis Metalworking Rottary Table

  • Hollywood, Florida, United States
  • Jun 28th
Bridgeport 12" Rotary Table

Bridgeport 12" Rotary Table

  • Upper Sandusky, Ohio, United States
  • Jun 29th
USA MADE 12" HERTER ROTARY TABLE MILL MILLING

USA MADE 12" HERTER ROTARY TABLE MILL MILLING

  • Lake Forest, California, United States
  • May 24th
SIMPLICITY MISSES DRESSES-14-16-18-20-22

SIMPLICITY MISSES DRESSES-14-16-18-20-22

  • Hickory Hills, Illinois, United States
  • May 26th
Green Dog Skunk 911 Shampoo-

Green Dog Skunk 911 Shampoo-

  • Hickory Hills, Illinois, United States
  • May 26th
Starrett Taper Gage 269A - .100-.500

Starrett Taper Gage 269A - .100-.500

  • Lindsborg, Kansas, United States
  • May 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies