US $690
| Condition | New other (see details)
:
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
|
| Seller Notes | “item appears to be new or very rarely if ever used. there is a coating on it to prevent corrosion.” |
Directions
Similar products from Lathe Chucks
USED HARDINGE NO. 2 SPEED COLLET CHUCK WITH 32 COLLETS
MT2 SHANK 3 INCH 3-JAW LATHE CHUCK WITH THREADED DRAWBAR END 3/8-16 (3900-4706)
8 INCH JAW BORING FIXTURE (3900-4668)
12 INCH JAW BORING RING (3900-4658)
10 INCH TONGUE & GROOVE STEEL SOFT JAW 3 PIECE SET (3900-4760)
8 INCH TONGUE & GROOVE STEEL SOFT JAW 3 PIECE SET (3900-4758)
Suburban? 8” Round Permanent Magnetic Chuck
Tru-Merit Economy Commutator Lathe
Gator 12" 6-Jaw TECH-TRU Scorll Forged Steel Lathe Chuck-0.0004" TIR,w/Fine Adj.
Earth-Chain EEPM-2580W 31.9"(L)x9.4"(W)x2.8"(H) MagVise Electro-Permanent Chuck
SMW AUTOBLOK 210 BH 2 JAW POWER CHUCK HYDRAULIC CHUCK 2 JAW
KITAGAWA B-208 3 JAW POWER CHUCK 8" HYDRAULIC CHUCK A2-6 MOUNTING PLATE B208
21" CUSHMAN 3-JAW POWER WRENCH LATHE CHUCK 6-1/4" HOLE A11 BACK
10 Pairs of Yelok 6"x 2 "x 1.00" Aluminum Vise Jaws 6061T6
ER25 COLLET CHUCK EXTENSION 3/4 X 2" SHANK STK21
Chuck Jaws Assorted Lot 5 Chuck Jaws
Kitagawa Power Chuck Model 205B (3 available)
Microcentric Precision Power Chuck 210D - 2
Microcentric Precision Power Chuck 165D - 2
People who viewed this item also vieved
ANGLE IRON 7 1/4" X 101/4" X 5 3/4" 6152 SP TL 1
Carr Lane CL-11-RB, 1 1/4" Head Diameter X 5/8" Height X .750 Dia. Rest Buttons
2 Dead Centers, No. 3 and No. 4 Morse Taper, 2 5/8" Diameter
NEW OLD STOCK MT4 CARBIDE TIPPED LATHE DEAD CENTER. Morse Taper #4. Made in USSR
MACHINIST METAL LATHE LIVE BEARING CENTER WITH NO. 4MT SHANK
Hardinge R8 Round Stepped Collet, 20mm Hole Size
Lot of 12 5C Collets. 12 Collet Set. Mixed Sizes / Unknown Brand(s)
Brown & Sharpe Hex 22 Collet 13/16".
TOOLMAKER CLAMP BOX LOT, 2 Sizes, One Starrett, NO RESERVE!
DE STA CO 207-44 Horizontal Handle Hold Down Action Clamp
Heinrich DA-6601 Air Machine Vise 6" Jaw Width 7 3/8 Jaw Opening Stationary
Vintage Wilton Scout USA 4" Bench Vise w/ Swivel Base, Pipe Jaws & Anvil
Machinist Gunsmith Bench Block Toolmaker Round Knurled
VINTAGE V BLOCK MACHINST TOOLS (PAIR) AND BONUS TOOLS
Rotary Cutter Blade Refills-45mm 5/Pkg
"The Birches Counted Cross Stitch Kit-10.25""X15"" 14 Count"
15" TROYKE ROTARY TABLE W/ Stepper Motor
Rotary Table; 9"; Troyke Model BH-9 for all milling machines
TROYKE 21” Rotary Table Model BH 21
Winona Van Norman Rotary Broach Workholding Finger 1" With Serrated Teeth
Machinist Steel Milling Layout Top L: 18" W: 15" H: 3"
698158,23280,CY32 PRECISION BRAND BLUE TEMPERED SPRING STEEL
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies