Manufacturers Description: Shaker:Environmental: Barnstead/Thermolyne: MaxQ 5000: SHKA5000 Easily accommodate six 4L flasks, four 6L flasks, or six 2800mL Fernbach flasks. Wide temperature range from 10 C above ambient to 60 C on incubated models; and 15 C below ambient to 60 C on refrigerated models. Easy access drain system with quick disconnect fitting is located on the side of the cabinet for convenience in draining and disinfecting the system. A drip pan is located directly underneath the platform to contain spills and protect the chamber from damage. Foot pedal opens the door automatically for hands free operation. Observe flask contents without opening the door through a large slanted viewing window. Operation Shakers feature a triple eccentric drive to handle heavy workloads, provide uniform agitation and enable continuous 24-hour operation even at high speeds. PID temperature controller precisely monitors and controls chamber temperature over complete range with 0.1 C accuracy at 37 C. Analog Operating Systems DC motor and variable speed control from 40 to 400 rpm, controlled by a rotary dial. Integrated tachometer monitors and displays speed in rpm to guarantee an accurate setting. Easy-to-read LED digital display shows temperature. Operate shaker in continuous mode or set timer from 1 to 60 minutes for time studies. Digital Operating Systems Solid state DC brushless motor, variable speed control from 15 to 500 rpm, and continuous and timed operation from 0.1 hour up to 999 hours or 0.1 minute to 999 minutes. View speed, operating time and temperature simultaneously on three individual LED displays which helps minimize errors in establishing running conditions. Visual/audible signals alert you to temperature deviations. Heat turns off if temperature deviates 1 C of set point. Shaker shut down and audible/visual alarms signal if unit operates 10% of set speed preventing shaker from walking. User adjustable speed calibration can be performed using a digital hand held tachometer where verification is required and protocols can be standardized. Unbalanced load sensor stops platform motion when excess vibration is detected due to unbalanced load. Visual/audible alarm signal until condition is corrected. Soft start feature eliminates splashing of vessel contents, wetting of flask closure, and helps prevent sudden starts and stops. Set point retention retains parameters during power failure and restarts unit automatically after power is restored. RS232 interface allows remote monitoring of speed, time and temperature. Safety Over temperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails. Applications Cell cultures Solubility studies Protein expression Extraction procedures Plant growth Plasmid purification General mixing Bacterial suspensions Hybridizations Staining & destaining Washing procedures Digital-- Hertz = 50/60-- Operating Temp Range C = 10 C above ambient to 60 C-- Orbit Size = 1 (2.54)-- Overall Dimensions D = 32 (81.3)-- Overall Dimensions H = 41 (104.1)-- Overall Dimensions W = 41 (104.1)-- Product Line = Lab-Line-- Shipping Weight LK = 476 (215.9)-- SpeedRange = 15 to 500 1 rpm-- Temp Uniformity C = 0.1 C at 37 C in flask-- Volts = 120V Terms and Conditions Item is sold as is, where is with no warranty, implied or expressed. Item is guaranteed to power on only. NO TESTING/VERIFICATION will be done to item. Returns and exchanges are not accepted. All sales are final. Item(s) in picture and description may differ from actual product. Some items may require additional service and or parts to reach OEM’s specifications. Payment via PayPal is due in 7 days. Items sold with a computer and/or software, installed and/or on a media; it is solely buyers’ responsibility to obtain and/or maintain a proper “user agreement” with the software provider. Most manufacturers do NOT allow sale of their software, or transfer of licenses and user agreements. Purchase DOES NOT include, any license or end-user rights from manufacturer; contents are for reference/testing purposes only; buyer acknowledges this condition of sale by buying. We assume no responsibility what so ever for the compatibility, issuance of the user agreement and/or license. We offer no guarantee for the software and/or any key diskettes required. All items we are selling are previously owned. Some items have been used with various chemicals. Even though, they are cleaned prior to sale, there might be residual chemicals left on the instruments. By purchasing an instrument from us, you acknowledge this fact and assume full responsibility; and indemnify us from any issues that might arise. Shipping and Handling ALL ITEMS ARE LOCAL PICK UP ONLY. Buyers unable to pick up items may arrange pick up of item located in Taunton, MA by a contracted carrier (i.e. Federal Express, UPS). See directions below. Buyer is responsible for all packaging costs prior to shipment. Any International shipment will incur a customs document processing fee of $25.00. No exceptions. All oversized items required to be palletized will incur a $75.00 per pallet charge. Carrier must contact logistics to schedule a pick up window at 508-884-5010. Business hours are Monday through Friday 8:30 am to 5:00 pm eastern standard time. If you have any questions, please ask before you buy. Do not assume anything. Preparing a shipment with carrier Customer must arrange for Call tag with the carrier of their choice Customer must also arrange a pickup with the carrier of their choice (if we requests it, we will be charged) Customer must email seller the shipment label and confirmation pickup number (So that shipping can ensure pickup takes place as scheduled and is notified of date & time of pickup) Fedex Ground must be used with Fedex Ground pickup and Fedex Express must be used with Express shipments (acct #’s are interchangeable ) Fedex Freight accounts cannot be used to ship Express or Ground shipments and vice versa Items not picked up within 10 business days will be considered abandoned and returned to inventory.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
