6x75 Wall Base Johnsonite Tightlock Resilient Tcbr 176 Brass 6"x75'

US $990

Hackensack, New Jersey, United States
Jun 23rd

Open on mobile:
QR code

TightLock Wall Base Johnsonite TCBR 176 BRASS Finishing Border 6” X 75’ TightLock Carpet and Resilient/Topset Wall Base by JOHNSONITE Choose a Wall Art pattern to bring in the luxurious look of metal, stone or wood without the high costs of the typical installation and maintenance challenges, to your commercial flooring project. · Easy to maintain resilient flooring accessories · Scuff, scratch, nick and dent resistant · Will not peel or crack · Permanent through pattern · Low life cycle cost · Can be installed before carpet Construction: Johnsonite TightLock Carpet wall base is a wedge shaped toeless base specifically designed to be installed prior to traditional, direct, or double glue down carpet installations. TightLock Resilient Topset wall base is specifically designed for resilient installations. Where there is a transition from resilient flooring to carpet. All TightLock profiles are available in either rubber or vinyl formulations, which meet the performance requirements of ASTM F-1861, Type TP and TV, Group 1 (solid) Standard Specification for Resilient Wall Base. TightLock for Resilient Topset (Coved): TCBR-XX (Vinyl), 1/4" (6.35 mm) thick wedge shaped profile with toe (Coved), available in height 6-1/2" (16.51 cm) Description : 1/4" (6.35 mm) thickness - wedge design with a toe (Coved) Heights : 6-3/8" (16.19 cm) overall heights Lengths : 75' (22.9 m) coiled lengths INSTALLATION : Johnsonite Wall Base and adhesives must be site conditioned at room temperature for a minimum of 48 hours prior to, during, and after installation. Room temperature must be maintained between 65F and 85F (18C and 30C) with HVAC system operating. A minimum temperature of 55F (13C) must be maintained afterwards. The ambient relative humidity should be between 40% and 60%. All walls must be clean, smooth, flat and dry. The surface must be free of all dust, loose particles, solvents, paint, grease, oil, wax, alkali, sealing/curing compounds, old adhesive, and any other foreign material, which could affect installation. Remove existing adhesive mechanically – do not use chemical adhesive removers or solvents. Fill all depressions, cracks, and other surface irregularities with a good quality patching compound. Caution: Do not use liquid solvents or adhesive removers. Do not install Johnsonite BaseWorks Wall Base over vinyl wall coverings. Do not install Johnsonite Wall Base over non-porous surfaces with Johnsonite 960 Wall Base Adhesive. For non-porous surfaces apply Johnsonite 946 Premium Contact Adhesive.