7 Hp 2 Stroke Outboard Motor Tiller Shaft Boat Engine Water Cooling Cdi System

US $29.99

zhengzhou, China
Aug 29th

Open on mobile:
QR code

7 HP 2 Stroke Outboard Motor Tiller Shaft Boat Engine Water Cooling CDI System About certification: We can only provide CE certification, there is no other certification can be provided,thanks for your understanding. Technical Parameters Short shaft: 40cm Dimension Overall length 1040mm(40.9 in) Overall width 872mm(34.3 in) Overall height 332mm(13.1 in) Transom height 44CM(17.3 in) Performance Full throttle operating range 5000-6000r/min Maximum output 7HP Idling speed ( in neutral) 1000±100 r/min Engine Gear positions Forward-neutral-reverse Gear ratio 2.15(28/13) Trim and tilt system: Manual tilt Drive unit Recommended fuel Regular unleaded gasoline Integral fuel tank capacity 2.5L Recommended engine oil 2-stroke outboard motor oil Engine oil type Genuine or recommended 2str engine oil Lubrication System Engine oil mixed gasoline Engine oil mixing ratio Fuel 50: Engine oil 1 Gear oil quantity 195ml(6.6 fl.oz.) Tightening torque for engine Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m) Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m) Notice: Please add gear oil to the gears before use the motor and replace gear oil after the run-in period10hours. (if you do not know how to handle this, please contact with us )

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Model	HP 2 Stroke
Brand	Unbranded
MPN	Does Not Apply
UPC	Does not apply