7 Simpson Strong Tie ET-HP 22 Anchoring Adhesive Epoxy (Not Reserve), US $250.00 – Picture 0

7 Simpson Strong Tie ET-HP 22 Anchoring Adhesive Epoxy (Not Reserve), US $250.00 – Picture 1

7 Simpson Strong Tie ET-HP 22 Anchoring Adhesive Epoxy (Not Reserve), US $250.00 – Picture 2

7 Simpson Strong Tie ET-HP 22 Anchoring Adhesive Epoxy (Not Reserve), US $250.00 – Picture 3

7 Simpson Strong Tie Et-hp 22 Anchoring Adhesive Epoxy (not Reserve)

US $250.00

Miami, Florida, United States
Mar 30th

Open on mobile:
QR code

Seven (7) Simpson Strong Tie ET-HP 22 Anchoring Adhesive Epoxy ET-HP® Anchoring Adhesive ET-HP22 323R572R ET-HP® is a two-component, high-solids epoxy system for use as a high-strength, non-shrink anchor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. ET-HP® meets the ASTM C 881 specifications for Type I and IV Grade 3, Class C. FEATURES This listing is for seven (7) EACH Epoxy-Tie 22 Oz Anchoring Adhesive and one (1) Nozzles A 2-component, high-solids, epoxy-based system for use as a high-strength, nonshrink anchor grouting material Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. ET meets the ASTM C-881 specifications for Type I, II, IV, and V, Grade 3, Classes B and C, except gel time. Uses: Threaded rod anchoring, rebar doweling, bonding hardened concrete to hardened concrete, pick-proof sealant around doors, windows, and fixtures, and paste-over for crack injection. 22 oz. side-by-side cartridge Material: Epoxy Container Size: 22oz Manufacturer Part Number: ET-HP22 ET-HP has passed the demanding adverse-condition tests of ICC-ES AC308 pertaining to elevated temperature and long-term sustained load Code-listed under the current IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-3372 Code-listed under the current IBC/IRC for masonry Suitable for use under static and seismic loading conditions in cracked and uncracked concrete Cure times: 24 hours at 80°F, 72 hours at 50°F For water-saturated concrete (including damp and water-filled holes), the cure times must be doubled Easy hole-cleaning procedure – no power brushing required Suitable for use in damp or wet anchor sites COLOR When properly mixed, adhesive will be a uniform gray color Brand new in unopened original packaging Exp Date: 06/2016 Made in the USA

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Simpson Strong-Tie
Country/Region of Manufacture	United States