8'x8' 650 series roll up door by DBCI w/hardware, US $400.00 – Picture 0

8'x8' 650 series roll up door by DBCI w/hardware, US $400.00 – Picture 1

8'x8' 650 series roll up door by DBCI w/hardware, US $400.00 – Picture 2

8'x8' 650 series roll up door by DBCI w/hardware, US $400.00 – Picture 3

8'x8' 650 series roll up door by DBCI w/hardware, US $400.00 – Picture 4

8'x8' 650 series roll up door by DBCI w/hardware, US $400.00 – Picture 5

8'x8' 650 Series Roll Up Door By Dbci W/hardware

US $400.00

Fyffe, Alabama, United States
Jan 30th

Open on mobile:
QR code

DBCI 650 mini series roll up door. Comes with all the brackets,tracks, and hardware needed for installation. Comes with either inside or outside locks (Customer must specify) . Many different colors available. We carry all sizes/series of roll up doors as well as a full line of steel building and post frame components. Buyer will need to specify if mounting to wood or metal (20$ upcharge if mounting to metal) Please allow 7-14 days for handling and transit time. Door with non standard colors may take longer.Thanks! The 650 is the best choice for an easy operatable and low maintenance door, which features shielded steel radial bearings on both support brackets. The DBCI tension bracket allows quick, safe, inexpensive and unlimited adjustments to the door. DBCI doors use the WeatherX coating system, which is recognized for its remarkable color and gloss retention, as well as its superior chalk resistance. It allows DBCI doors to endure the physical abuses from manufacturing, transit and installation while minimizing cracking. Curtain 26-gauge galvanized, Grade E hard steel 5/8” ribbed corrugation Many latch options available All latches accept double locks and 7/16” shackles Rain lip note: For proper exterior door installation, a 1 1/2 ” deep rain lip must be formed in the concrete slab extending a minimum of 3 1/2 ” from the interior face of the jamb NOTE: The 650 Series are wind rated up to 8’8” wide and approximately 90 MPH. For test results on doors up to 8’8” wide, please contact DBCI Bottom Bar 6063 – T6 aluminum extrusion 1 1/2 ” x 1 1/2 ” galvanized angles Replaceable bulb astragal Axle-Drum Assembly 1 5/16” O.D. steel axle, 14-gauge Utilizes 9 1/2 ”, 18-gauge drums Oil tempered e-coated torsion springs, available in two springs upon request from 7’ to 10’ wide Fully accessible springs for inspection and maintenance Guide System 18-gauge galvanized steel Pre-punched holes for anchors, slide latch, bracket attachment and head stop attachment Polyethylene guide strips provide easy, quiet operation Hardware 12-gauge head stops have slotted mounting holes for proper attachment 14-gauge galvanized steel handles 12-gauge tension bracket made for additional strength Shielded radial bearings for smooth operation Worm gear tensioning design allows for smooth adjustment 12-gauge bearing bracket on right side Options Insulation 651 Series Top and side draft stop

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	DBCI
MPN	8x8
Model	650
Country/Region of Manufacture	United States