+ Post new Ad
8" Soft Jaw Boring Ring lathe Chucks BORE, US $175.00 – Picture 0
8" Soft Jaw Boring Ring lathe Chucks BORE, US $175.00 – Picture 0

8" Soft Jaw Boring Ring Lathe Chucks Bore

US $175.00

  • Columbus, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
Ajax 8" Soft Jaw Boring Ring BETTER CONCENTRICITY (TIR) REDUCE MACHINE WEAR & TEAR HARDENED AND PRECISION GROUND How Chuck Jaw Boring Rings Works * For power and manual lathe chucks. * Save 75% on set up time and get truer to tolerance on bored out jaw. * East to Use: Just Insert bolts in hole of soft jaws * Tightin 3 Socket head cap screws onto 3 top jaws. * Close the Chuck, and Bore! As simple as that! * 3 Knurled post pick up size by mounting closer to center on further from center: As you position where you want the convex milled slots on the ring. * 3 Independent knurled post that you insert into your soft jaw counter bores. No need to loosen on tighten anything. Buy appling medium chucking pressure the ring locks into place and you are ready to bore. * You can use one ring to do OD turning in addition to ID turning. Also keep in mind when picking up all Inside dimentions these rings have excellent T.I.R. And we can always at anytime reverse all 3 soft jaws and pick up the larger OD as well. * Helpful hints on better understanding of how these boring rings work. Basically, the boring ring locks down our soft jaws so we all can bore better and cleaner T.I.R. *Plus boring ring save on the overall wear & tear on the overall machines itself. Harden and precision ground all the way around And stocking boring ring sizes 6" 8" 10" 12" 15" $15.00 Shipping Inside Continental 48 United States. Alaska & Hawaii & International buyers pay priority cost. We require a physical address on all items Sorry NO P.O. Box. 575 N. Hague Ave. Columbus, Ohio. 43204 Phone # 1-800-543-5998 Pay me securely with any major credit card through PayPal!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Ajax
Workholding Part Type Chucks
MPN JBR80
Holder Type Lathe
Type Soft Jaw Boring Ring

Directions

Similar products from Lathe Chucks

ER11 10MM STRAIGHT SHANK (L100MM) CHUCK CNC MILLING LATHE TOOL & WORKHOLDING L29

ER11 10MM STRAIGHT SHANK (L100MM) CHUCK CNC MILLING LATHE TOOL & WORKHOLDING L29

  • Hong Kong, Hong Kong
  • Jan 30th
ER16 1/2" STRAIGHT SHANK COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #F89

ER16 1/2" STRAIGHT SHANK COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #F89

  • Hong Kong, Hong Kong
  • Jan 30th
ER32 BT30 SPRING COLLET HOLDER CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #B51

ER32 BT30 SPRING COLLET HOLDER CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #B51

  • Hong Kong, Hong Kong
  • Jan 30th
ER32 MT3 MK3 M12 SPRING COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #A75

ER32 MT3 MK3 M12 SPRING COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #A75

  • Hong Kong, Hong Kong
  • Jan 30th
ER16 3/4" STRAIGHT SHANK CHUCK CNC MILLING LATHE TOOL & WORKHOLDING NEW #C45

ER16 3/4" STRAIGHT SHANK CHUCK CNC MILLING LATHE TOOL & WORKHOLDING NEW #C45

  • Hong Kong, Hong Kong
  • Jan 30th
BUCK 4" 3-JAW SET-TRU LATHE CHUCK

BUCK 4" 3-JAW SET-TRU LATHE CHUCK

  • Wadley, Alabama, United States
  • Jan 30th
15-3/4" Bison 4 Jaw Lathe Chuck DirectMount D1-11 +Hard

15-3/4" Bison 4 Jaw Lathe Chuck DirectMount D1-11 +Hard

  • Columbus, Ohio, United States
  • Jan 30th
10" GATOR Lathe Chuck 3 Jaw Direct Mount D1-6 NEW

10" GATOR Lathe Chuck 3 Jaw Direct Mount D1-6 NEW

  • Columbus, Ohio, United States
  • Jan 30th
Choose ONE Chuck Wrench Standard OR Self Eject Lathe

Choose ONE Chuck Wrench Standard OR Self Eject Lathe

  • Columbus, Ohio, United States
  • Jan 30th
Baileigh Ornametal Universal Scroll Bar Bender MPB-15

Baileigh Ornametal Universal Scroll Bar Bender MPB-15

  • Columbus, Ohio, United States
  • Jan 30th
3" JAW CHUCK 12" DIAMETER (4985)

3" JAW CHUCK 12" DIAMETER (4985)

  • Chicago, Illinois, United States
  • Jan 30th
SET OF 3 USED CUSHMAN HARD MASTER SCROLL CHUCK BASE JAWS (1.45" Jaw Width)

SET OF 3 USED CUSHMAN HARD MASTER SCROLL CHUCK BASE JAWS (1.45" Jaw Width)

  • Fairfield, Iowa, United States
  • Jan 30th
SET OF 3 USED DACO USA TONGUE & GROOVE LATHE CHUCK SOFT JAWS (2.00" Jaw Width)

SET OF 3 USED DACO USA TONGUE & GROOVE LATHE CHUCK SOFT JAWS (2.00" Jaw Width)

  • Fairfield, Iowa, United States
  • Jan 30th
ISO 7388 2 B Pull stud Retention knob M16 Retaining Knob for SK40

ISO 7388 2 B Pull stud Retention knob M16 Retaining Knob for SK40

  • Shanghai, China
  • Jan 30th
3" 80mm Three Jaw Self Centering Scroll Lathe Chucks Solid Jaws

3" 80mm Three Jaw Self Centering Scroll Lathe Chucks Solid Jaws

  • ???, ???, China
  • Jan 30th
ER Collet

ER Collet

  • LUDHIANA, PUNJAB, India
  • Jan 30th
PSI Woodworking Barracuda Wood Lathe Key Chuck System (CSC3000C)

PSI Woodworking Barracuda Wood Lathe Key Chuck System (CSC3000C)

  • Hickory Hills, Illinois, United States
  • Jan 30th
USED ROHM HARD MASTER CHUCK JAWS FOR 3-JAW CHUCK 3GB (107503)

USED ROHM HARD MASTER CHUCK JAWS FOR 3-JAW CHUCK 3GB (107503)

  • Fairfield, Iowa, United States
  • Jan 30th
(U2) NARDO 1560151-CPJ COLLECT PAD CHUCK JAWS

(U2) NARDO 1560151-CPJ COLLECT PAD CHUCK JAWS

  • Cleveland, Ohio, United States
  • Jan 30th
HOWA HO37M8 8" 3-JAW CHUCK

HOWA HO37M8 8" 3-JAW CHUCK

  • Cornelia, Georgia, United States
  • Jan 30th

People who viewed this item also vieved

HHIP 3402-0323 6 x 6 x 8" V Angle Plate

HHIP 3402-0323 6 x 6 x 8" V Angle Plate

  • USA, United States
  • May 29th
Vacuum Chuck (22cm x 33 cm)

Vacuum Chuck (22cm x 33 cm)

  • Rochester, New York, United States
  • May 29th
Vacuum Chuck (17cm x 11 cm)

Vacuum Chuck (17cm x 11 cm)

  • Rochester, New York, United States
  • May 29th
Starrett Co Split Collet .157 Collet with Blind Hole

Starrett Co Split Collet .157 Collet with Blind Hole

  • Portland, Oregon, United States
  • May 30th
Starrett Co Split Collet .157 Collet with Blind Hole 1 Collet

Starrett Co Split Collet .157 Collet with Blind Hole 1 Collet

  • Portland, Oregon, United States
  • May 30th
Starrett Co Split Collet .250 Collet with Blind Hole 1 Collet

Starrett Co Split Collet .250 Collet with Blind Hole 1 Collet

  • Portland, Oregon, United States
  • May 30th
Enco #1 MT Live Center Made in France (G152-D1)

Enco #1 MT Live Center Made in France (G152-D1)

  • Oxford, Pennsylvania, United States
  • May 31st
Large LIve Center for lathe

Large LIve Center for lathe

  • Augusta, Kansas, United States
  • May 31st
Grizzly H3408 Live Center, MT2

Grizzly H3408 Live Center, MT2

  • Multiple Locations, United States
  • May 31st
ARMSTRONG STEEL FORGED C CLAMP 78-030 Heavy Duty USA-

ARMSTRONG STEEL FORGED C CLAMP 78-030 Heavy Duty USA-

  • Crown Point, Indiana, United States
  • May 31st
ARMSTRONG STEEL FORGED C CLAMP 78-020 Heavy Duty USA-

ARMSTRONG STEEL FORGED C CLAMP 78-020 Heavy Duty USA-

  • Crown Point, Indiana, United States
  • May 31st
3" c clamp

3" c clamp

  • Laurel, Delaware, United States
  • May 31st
NEW 5C Air Collet Chuck Fixture Eagle Rock USA MADE

NEW 5C Air Collet Chuck Fixture Eagle Rock USA MADE

  • Columbus, Ohio, United States
  • Jun 2nd
38pc Carbide Tipped Brazed Tool Bits ALL NEW 1/4" Grade C-6 Steel Alloys Premium

38pc Carbide Tipped Brazed Tool Bits ALL NEW 1/4" Grade C-6 Steel Alloys Premium

  • Columbus, Ohio, United States
  • Jun 2nd
Vise Speed Handle 3/4" Hex For 6" Vises NEW

Vise Speed Handle 3/4" Hex For 6" Vises NEW

  • Columbus, Ohio, United States
  • Jun 2nd
TTC AP-4 SOLID ANGLE PLATE

TTC AP-4 SOLID ANGLE PLATE

  • Flushing, New York, United States
  • Jun 9th
7 MIXED LOT MACHINIST BLOCKS 1" X 2" X 3" PRECISION TOOL DIE METAL WORKING LOT 4

7 MIXED LOT MACHINIST BLOCKS 1" X 2" X 3" PRECISION TOOL DIE METAL WORKING LOT 4

  • Grayling, Michigan, United States
  • Jun 9th
5 MACHINIST ANGLE INSPECTION BLOCKS STEP RISER PRECISION TOOL DIE METAL WORKING

5 MACHINIST ANGLE INSPECTION BLOCKS STEP RISER PRECISION TOOL DIE METAL WORKING

  • Grayling, Michigan, United States
  • Jun 9th
BROWN & SHARPE Adjustable Parallel Set

BROWN & SHARPE Adjustable Parallel Set

  • Flushing, New York, United States
  • Jun 9th
6" Quick Set Release Vise Machining Machinist Milling Mill Machine Tool Tooling

6" Quick Set Release Vise Machining Machinist Milling Mill Machine Tool Tooling

  • Waldo, Wisconsin, United States
  • Jun 9th
4-1/2" Adjustable Precision Vise Tilt & Swivel Machining Machinist Milling Mill

4-1/2" Adjustable Precision Vise Tilt & Swivel Machining Machinist Milling Mill

  • Waldo, Wisconsin, United States
  • Jun 9th
Super Nice Haas HRT210 Rotary Table 17pin 4th Axis Indexer Milling Cnc Mill

Super Nice Haas HRT210 Rotary Table 17pin 4th Axis Indexer Milling Cnc Mill

  • Rolla, Missouri, United States
  • Jun 9th
Sherline rotary controller

Sherline rotary controller

  • Washoe Valley, Nevada, United States
  • Jun 9th
20" Rotary Table Pratt & Whitney

20" Rotary Table Pratt & Whitney

  • Johnson City, Tennessee, United States
  • Jun 9th
"Blocking Wire 25ft .025""- "

"Blocking Wire 25ft .025""- "

  • Hickory Hills, Illinois, United States
  • Jun 17th
Reindeer With A Red Scarf I Cushion Cross Stitch Kit-16"X16"

Reindeer With A Red Scarf I Cushion Cross Stitch Kit-16"X16"

  • Hickory Hills, Illinois, United States
  • Jun 17th
"LanArte My Best Friend On Cotton Counted Cross Stitch Kit-11""X13.5"" 27 Count"

"LanArte My Best Friend On Cotton Counted Cross Stitch Kit-11""X13.5"" 27 Count"

  • Hickory Hills, Illinois, United States
  • Jun 17th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies