+ Post new Ad
8MM X 66MM, 4-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x, US $24.74 – Picture 0
8MM X 66MM, 4-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x, US $24.74 – Picture 1
8MM X 66MM, 4-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x, US $24.74 – Picture 2
8MM X 66MM, 4-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x, US $24.74 – Picture 3
8MM X 66MM, 4-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x, US $24.74 – Picture 4
8MM X 66MM, 4-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x, US $24.74 – Picture 0
8MM X 66MM, 4-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x, US $24.74 – Picture 1
8MM X 66MM, 4-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x, US $24.74 – Picture 2
8MM X 66MM, 4-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x, US $24.74 – Picture 3
8MM X 66MM, 4-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x, US $24.74 – Picture 4

8mm X 66mm, 4-flute, Hss, High Cobalt %, Flat, Center Cutting, Endmill, 5x

US $24.74

  • --, Hong Kong
  • Feb 28th
Open on mobile:
QR code
8MM X 66MM, 4-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x FOUR FLUTE CENTER CUTTING CUTTER DIAMETER : 8MM TOTAL LENGTH : 65MM FLUTE LENGTH : 23MM SHANK DIAMETER : 8MM 5 PCS IN 5 BOXES. THIS ENDMILL MATERIAL CONTAINS HIGH PERCENTAGE OF COBALT. MAKE IT A VERY HARD MATERIAL.  IT IS VERY TOUGH, SUPERIOR SHARP CUTTING EDGE. NOT EASLIY BREAK DURING MACHINING. A GENERAL ENDMILL FOR SOFT METAL, WOOD, ARCYLIC, PLASTIC. PLEASE WRITE TO ME FOR ANY INQUIRY WE SHIP WORLDWIDE. BY E-PACKET OR AIR MAIL. THANK YOU FOR ATTENTION
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Material HSS (High Cobalt %)
Flutes 4-Flute
Coating None
Cutting Diameter 8mm
End Type Flat
Overall Length 66mm
Model HSS Series
Country/Region of Manufacture China
MPN N/a

Directions

Similar products from End Mills Router & Drill Bits

Cleveland C32715 1-1/4" 6-FLute TiN End Mill

Cleveland C32715 1-1/4" 6-FLute TiN End Mill

  • Elma, Washington, United States
  • Mar 2nd
5/8 YG-1 V7 Mill/INOX CARBIDE, 4 FLUTE REGULAR LENGTH END MILL, QTY 5

5/8 YG-1 V7 Mill/INOX CARBIDE, 4 FLUTE REGULAR LENGTH END MILL, QTY 5

  • Houston, Texas, United States
  • Mar 2nd
3 3/4" Garr # 52827 Solid Carbide 5 Flute Single End Mill coating

3 3/4" Garr # 52827 Solid Carbide 5 Flute Single End Mill coating

  • Union, New Jersey, United States
  • Mar 2nd
5/8 YG-1 V7 Mill/INOX CARBIDE, 4 FLUTE REGULAR LENGTH R.04 END MILL, QTY 1

5/8 YG-1 V7 Mill/INOX CARBIDE, 4 FLUTE REGULAR LENGTH R.04 END MILL, QTY 1

  • Houston, Texas, United States
  • Mar 2nd
3/4 YG-1 V7 Mill/INOX CARBIDE, 5 FLUTE REGULAR LENGTH, QTY 1

3/4 YG-1 V7 Mill/INOX CARBIDE, 5 FLUTE REGULAR LENGTH, QTY 1

  • Houston, Texas, United States
  • Mar 2nd
GW Morse Tools Co. 'End Mill...3/4" shank'...4-Flutes No.1897..in case!

GW Morse Tools Co. 'End Mill...3/4" shank'...4-Flutes No.1897..in case!

  • New Berlin, Wisconsin, United States
  • Mar 2nd
ABER Wodrauf Keyseat Cutter ? 3/4 X 1/8 1/2 Shank Loc: J1-3

ABER Wodrauf Keyseat Cutter ? 3/4 X 1/8 1/2 Shank Loc: J1-3

  • Oregon, Ohio, United States
  • Feb 28th
REGAL-BELOIT T-Slot Cutter for 3/8 Bolt 25/32 X 21/64 Loc: J1-2

REGAL-BELOIT T-Slot Cutter for 3/8 Bolt 25/32 X 21/64 Loc: J1-2

  • Oregon, Ohio, United States
  • Feb 28th
KEO Keyseat Cutter 1 X 3/16 1/2 Shank Loc: J1-3

KEO Keyseat Cutter 1 X 3/16 1/2 Shank Loc: J1-3

  • Oregon, Ohio, United States
  • Feb 28th
DoALL T-Slot Cutter for 1/2 Bolt 31/32 X 3/8 Loc: J1-1-1

DoALL T-Slot Cutter for 1/2 Bolt 31/32 X 3/8 Loc: J1-1-1

  • Oregon, Ohio, United States
  • Feb 28th
CNC Machinist = 2 pack HSS 3/4" End Mill = BRAND NEW Auction

CNC Machinist = 2 pack HSS 3/4" End Mill = BRAND NEW Auction

  • North Las Vegas, Nevada, United States
  • Feb 28th
5/8" X 5/8" X 1" x 4 1/2" End Mill Double End 2 Flutes OSG 52221

5/8" X 5/8" X 1" x 4 1/2" End Mill Double End 2 Flutes OSG 52221

  • Philadelphia, Pennsylvania, United States
  • Feb 28th
DBL End mill 9/16"

DBL End mill 9/16"

  • Bridgewater, Connecticut, United States
  • Feb 28th
ASSORTMENT OF 40 NEW AND USED MILL ENDS (NO RESERVE)

ASSORTMENT OF 40 NEW AND USED MILL ENDS (NO RESERVE)

  • Greensboro, North Carolina, United States
  • Feb 28th
2.5MM X 50MM 2-FLUTE HRC55 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL 5x

2.5MM X 50MM 2-FLUTE HRC55 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL 5x

  • --, Hong Kong
  • Feb 28th
FULLERTON DURA-CARB 39206 3/16X5/8X2 LIST 3700 SQUARE END **NEW**

FULLERTON DURA-CARB 39206 3/16X5/8X2 LIST 3700 SQUARE END **NEW**

  • Forest Lake, Minnesota, United States
  • Feb 28th
FULLERTON DURA CARB ENDMILL 39208 * 1/4X3/4X2-1/2 **NEW**

FULLERTON DURA CARB ENDMILL 39208 * 1/4X3/4X2-1/2 **NEW**

  • Forest Lake, Minnesota, United States
  • Feb 28th
FULLERTON DURA CARB END MILL 39210TIN * 5/16X13/16X2-1/2 **NEW**

FULLERTON DURA CARB END MILL 39210TIN * 5/16X13/16X2-1/2 **NEW**

  • Forest Lake, Minnesota, United States
  • Feb 28th
CLEVELAND TWIST C41171 #598 3/4X3/4X1-5/8 4 FLT H8 ENDMILL TIALN**NEW**

CLEVELAND TWIST C41171 #598 3/4X3/4X1-5/8 4 FLT H8 ENDMILL TIALN**NEW**

  • Forest Lake, Minnesota, United States
  • Feb 28th
1" X 1" X 2" X 4 1/2" Roughing Fine Pitch End Mill 5 Flutes MHC 7242263

1" X 1" X 2" X 4 1/2" Roughing Fine Pitch End Mill 5 Flutes MHC 7242263

  • Philadelphia, Pennsylvania, United States
  • Feb 28th

People who viewed this item also vieved

570 Super Rotary Broach Winona Van Norman head surfacing

570 Super Rotary Broach Winona Van Norman head surfacing

  • Campbell, California, United States
  • Jan 30th
Dumont 1/2" Keyway Broach

Dumont 1/2" Keyway Broach

  • United States
  • Jan 30th
KENNAMETAL NPR132F KC810 FREE SHIPPING

KENNAMETAL NPR132F KC810 FREE SHIPPING

  • Ray, Michigan, United States
  • Jan 30th
* FREE SHIPPING * SANDVIK 345R-1305M-PH 4240 20pcs

* FREE SHIPPING * SANDVIK 345R-1305M-PH 4240 20pcs

  • Beograd, Serbia
  • Jan 30th
KENNAMETAL Ceramic Turning Inserts SNG 432 T0420 KY4400 Qty 5 [945]

KENNAMETAL Ceramic Turning Inserts SNG 432 T0420 KY4400 Qty 5 [945]

  • Saint Louis, Missouri, United States
  • Jan 30th
NTK Ceramic Turning Inserts RNG 43-T0820 SX6 Qty 5 [927]

NTK Ceramic Turning Inserts RNG 43-T0820 SX6 Qty 5 [927]

  • Saint Louis, Missouri, United States
  • Jan 30th
LOT OF (6) MACHINE / MACHINIST TOOLING MACHINE SHOP TOOLS - USED

LOT OF (6) MACHINE / MACHINIST TOOLING MACHINE SHOP TOOLS - USED

  • Lancaster, Kansas, United States
  • Jan 30th
LOT OF (5) MACHINE / MACHINIST TOOLING MACHINE SHOP TOOLS - USED

LOT OF (5) MACHINE / MACHINIST TOOLING MACHINE SHOP TOOLS - USED

  • Lancaster, Kansas, United States
  • Jan 30th
STRIPPIT Nisshinbo AMADA 3.5 PUNCH & DIE WILSON 1.205X1.625 SD 1.212X1.273 SD 47

STRIPPIT Nisshinbo AMADA 3.5 PUNCH & DIE WILSON 1.205X1.625 SD 1.212X1.273 SD 47

  • Lake Worth, Florida, United States
  • Jan 30th
STRIPPIT Nisshinbo AMADA 3.5" PUNCH & DIE WILSON .796 X 1.496 RT +.004 32

STRIPPIT Nisshinbo AMADA 3.5" PUNCH & DIE WILSON .796 X 1.496 RT +.004 32

  • Lake Worth, Florida, United States
  • Jan 30th
Wayne Tool Co. 1 1/2" Spiral Flute Erector Reamer

Wayne Tool Co. 1 1/2" Spiral Flute Erector Reamer

  • Chillicothe, Missouri, United States
  • Jan 30th
Rock River Tools 240032, 1", Carbide Tipped, Straight Flute Chucking Reamer

Rock River Tools 240032, 1", Carbide Tipped, Straight Flute Chucking Reamer

  • Chillicothe, Missouri, United States
  • Jan 30th
PLAIN STRAIGHT TOOTH PLAIN MILLING CUTTER UTD 2-1/2 X 1/2 X 1 #8559

PLAIN STRAIGHT TOOTH PLAIN MILLING CUTTER UTD 2-1/2 X 1/2 X 1 #8559

  • Resaca, Georgia, United States
  • Jan 30th
STRAIGHT-TOOTH SIDE MILLING CUTTER KEMPSMITH 4-3/16 X 0.428 X 1-1/4 X 3/16 #8501

STRAIGHT-TOOTH SIDE MILLING CUTTER KEMPSMITH 4-3/16 X 0.428 X 1-1/4 X 3/16 #8501

  • Resaca, Georgia, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Lot of Burring Tools for Dremel Rotary Grinder Tool

MACHINIST TOOLS LATHE MILL Lot of Burring Tools for Dremel Rotary Grinder Tool

  • Morris Plains, New Jersey, United States
  • Jan 30th
2 Carbide Internal External Threading 1/2 Lathe Tool Bits Machinist Gunsmith Lot

2 Carbide Internal External Threading 1/2 Lathe Tool Bits Machinist Gunsmith Lot

  • Supply, North Carolina, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies