+ Post new Ad
9.5" x 3" tooling plate with quick clamps for sherline mill, US $13000 – Picture 0
9.5" x 3" tooling plate with quick clamps for sherline mill, US $13000 – Picture 0

9.5" X 3" Tooling Plate With Quick Clamps For Sherline Mill

US $13000

  • Yucaipa, California, United States
  • Nov 8th
Open on mobile:
QR code
Tooling plate and quick clamps Have a surface like those used in industry for your hobbyist/ enthusiast needs. You'll have no excuse to machine more parts now! Here is very useful and dynamic tooling plate for your sherline manual/ cnc mill.  - Comes with 90 pre-tap 10-32 holes at 1/2" intervals and space for reaming dowel pin holes for part repeating/ home location. - 4 quick set clamps to securely accommodate a range of stock contours... sqare, round, irregular, etc. - Clamps adjust on the fly from 1/4"-1" and comes with a step on the top side to be used to minimize lateral movement. - Plate protects your main table while allowing for re-facing of surface should you have an "oops" moment. - It attaches at four contact points to your existing table using you existing t-nut and screw hardware. - And why lose precious real estate? The low profile and width of these plates have minimal lost of Y and Z axis travel.  Included: (1) 6061 aluminum tooling plate (approx. 9.5" x 3" x 3/8") (4) 6061 quick reversible clamps  (4) carriage bolts 1/4-20 (4) wing nuts (not pictured in pic.1/5 above) (4) washers (4) 10-32 screws  Made In the USA Thanks for looking

Directions

Similar products from Tools for Other Machines

TEMCo 1/4 Inch 6x12 6061 Aluminum Tooling Flat Sheet Plate Bar Mill Stock

TEMCo 1/4 Inch 6x12 6061 Aluminum Tooling Flat Sheet Plate Bar Mill Stock

  • Chatsworth, California, United States
  • Nov 9th
TEMCo 1/4 Inch 3x12 6061 Aluminum Tooling Flat Sheet Plate Bar Mill Stock

TEMCo 1/4 Inch 3x12 6061 Aluminum Tooling Flat Sheet Plate Bar Mill Stock

  • Chatsworth, California, United States
  • Nov 9th
Fenn # 2 H Rotary Swaging / Hydroformer Machine - Used - AM16129

Fenn # 2 H Rotary Swaging / Hydroformer Machine - Used - AM16129

  • Brook Park, Ohio, United States
  • Nov 9th
Fenn # 3 F - 2-Die Rotary Swaging Machine - Used - AM16128

Fenn # 3 F - 2-Die Rotary Swaging Machine - Used - AM16128

  • Brook Park, Ohio, United States
  • Nov 9th
Mazak Quick Turn 8N CNC Turnming Center with Mazatrol T-32-2 Control, Model QT8N

Mazak Quick Turn 8N CNC Turnming Center with Mazatrol T-32-2 Control, Model QT8N

  • Pawtucket, Rhode Island, United States
  • Nov 9th
Union Tool Co. Spring Loaded Center Punch VTG USA!

Union Tool Co. Spring Loaded Center Punch VTG USA!

  • Anderson, California, United States
  • Nov 8th
Jet JDP-20VS-1 20" Variable Speed Floor Drill Press and Wilton Vise

Jet JDP-20VS-1 20" Variable Speed Floor Drill Press and Wilton Vise

  • Fort Wayne, Indiana, United States
  • Nov 8th
NEW TAPCO 11151 Brake Buddy used For Metal Brake Very Nice Break Unit

NEW TAPCO 11151 Brake Buddy used For Metal Brake Very Nice Break Unit

  • Billings, Montana, United States
  • Nov 8th
midwest snips lot

midwest snips lot

  • Winter Springs, Florida, United States
  • Nov 8th
sunnen jn boring bar

sunnen jn boring bar

  • Winona, Minnesota, United States
  • Nov 8th
Arc Machine Model 215 Remote pendent

Arc Machine Model 215 Remote pendent

  • Matthews, North Carolina, United States
  • Nov 8th
5" Seamless K Style Gutter Machine

5" Seamless K Style Gutter Machine

  • Oldsmar, Florida, United States
  • Nov 8th
T-0160-A Univ- Exten Housing Bushing Remover-Installer -Output Shaft Holding Fix

T-0160-A Univ- Exten Housing Bushing Remover-Installer -Output Shaft Holding Fix

  • Granbury, Texas, United States
  • Nov 7th
Vintage Langley Magnetic Hole Position Indicator #A6000

Vintage Langley Magnetic Hole Position Indicator #A6000

  • Santa Fe, New Mexico, United States
  • Nov 7th
Lot of 4 - Malco sheet metal tools - HP18-,C5-, N1-, TY6 - FREE SHIPPING!

Lot of 4 - Malco sheet metal tools - HP18-,C5-, N1-, TY6 - FREE SHIPPING!

  • Sparks, Nevada, United States
  • Nov 7th
Brown & Sharpe Surface Grinder, Model #510

Brown & Sharpe Surface Grinder, Model #510

  • Rehoboth, Massachusetts, United States
  • Nov 7th
ERIE 500 TONS Hydraulic Press

ERIE 500 TONS Hydraulic Press

  • Sylmar, California, United States
  • Nov 7th
Skimpy El Nino 6" Reach Belt Oil Skimmer Tramp Oil Skimmer, 115V Used, Warranty

Skimpy El Nino 6" Reach Belt Oil Skimmer Tramp Oil Skimmer, 115V Used, Warranty

  • Grand Rapids, Michigan, United States
  • Nov 7th
Ompar RA2300 Electronic Diamond Faceting Machine

Ompar RA2300 Electronic Diamond Faceting Machine

  • Pawtucket, Rhode Island, United States
  • Nov 6th
Keyway Broach Set 22 pcs 0.498 to 1.560 22 pcs in wood case

Keyway Broach Set 22 pcs 0.498 to 1.560 22 pcs in wood case

  • Punta Gorda, Florida, United States
  • Nov 6th

People who viewed this item also vieved

3" Chk Goss & De Leeuw 1-2-3 AUTOMATIC ChkER

3" Chk Goss & De Leeuw 1-2-3 AUTOMATIC ChkER

  • Harrison, New Jersey, United States
  • Jan 30th
H&G STYLE C 9/16 CAPACITY DIE HEAD W/ 1" SHANK

H&G STYLE C 9/16 CAPACITY DIE HEAD W/ 1" SHANK

  • Norwalk, California, United States
  • Jan 30th
0.75" Dia. Citizen L-20 Type VII CNC SWISS TYPE LATHE, Cincom Control, Live Tool

0.75" Dia. Citizen L-20 Type VII CNC SWISS TYPE LATHE, Cincom Control, Live Tool

  • Harrison, New Jersey, United States
  • Jan 30th
2.6' Arm 10" Col Dia South Bend GF50-800 RADIAL DRILL, Pwr El of Arm, Pwr Dnfd &

2.6' Arm 10" Col Dia South Bend GF50-800 RADIAL DRILL, Pwr El of Arm, Pwr Dnfd &

  • Harrison, New Jersey, United States
  • Jan 30th
Speedy-Cut J130 C-10 TAPPING MACHINE

Speedy-Cut J130 C-10 TAPPING MACHINE

  • Harrison, New Jersey, United States
  • Jan 30th
Helicoil Thread Repair Sets 5/16", 3/8" & 7/16"

Helicoil Thread Repair Sets 5/16", 3/8" & 7/16"

  • Boaz, Alabama, United States
  • Jan 30th
SYSTEM 3R TOOL KIT WIRE EDM SETUP KIT

SYSTEM 3R TOOL KIT WIRE EDM SETUP KIT

  • Howell, Michigan, United States
  • Jan 30th
EDM guide holder 3R-AGC3 , 3R-400.2411

EDM guide holder 3R-AGC3 , 3R-400.2411

  • United States
  • Jan 30th
Charmilles EDM tapping head Agie Elox Sodick Excello Cincinnati Chevalier Kent

Charmilles EDM tapping head Agie Elox Sodick Excello Cincinnati Chevalier Kent

  • Avondale, Arizona, United States
  • Jan 30th
Tape Measure Holster Clayvin's Clips never loose it never

Tape Measure Holster Clayvin's Clips never loose it never

  • Patterson, California, United States
  • Jan 30th
12 Ton Pipe Bender

12 Ton Pipe Bender

  • Wappingers Falls, New York, United States
  • Jan 30th
PRESS BRAKE DIE TOOLING - IRON WORKER - 40° ACUTE DIE 3" OPEN 7" LONG

PRESS BRAKE DIE TOOLING - IRON WORKER - 40° ACUTE DIE 3" OPEN 7" LONG

  • Chicago, Illinois, United States
  • Jan 30th
EMPIRE PRO-FINISH 36X48 BLAST CABINET W DUST COLLECTOR

EMPIRE PRO-FINISH 36X48 BLAST CABINET W DUST COLLECTOR

  • Decatur, Illinois, United States
  • Jan 30th
10pcs Type B20 HSS Bi-Directional Deburring Replacement Blades Shaviv #29019

10pcs Type B20 HSS Bi-Directional Deburring Replacement Blades Shaviv #29019

  • Hastings, Minnesota, United States
  • Jan 30th
Sunnen Mandrel L8-260AH BL8-300AH NEW

Sunnen Mandrel L8-260AH BL8-300AH NEW

  • Atwater, Ohio, United States
  • Jan 30th
DECKEL SOE TOOL & CUTTER GRINDER WITH MEASURING PROJECTOR

DECKEL SOE TOOL & CUTTER GRINDER WITH MEASURING PROJECTOR

  • Harrison, New Jersey, United States
  • Jan 30th
1996 PARAGON RC-12 CENTERLESS GRINDER w/AUTO INFEED, FACTORY PAINT

1996 PARAGON RC-12 CENTERLESS GRINDER w/AUTO INFEED, FACTORY PAINT

  • Harrison, New Jersey, United States
  • Jan 30th
BRYANT MODEL: 500 "SUPER-PRECISION CENTER HOLE GRINDER

BRYANT MODEL: 500 "SUPER-PRECISION CENTER HOLE GRINDER

  • Harrison, New Jersey, United States
  • Jan 30th
SANDVIK LATHE HOLDER 570 32NG 16

SANDVIK LATHE HOLDER 570 32NG 16

  • Medina, Ohio, United States
  • Jan 30th
SANDVIK LATHE HOLDER 570 32RF 20 with 570-DDXNL-32-11

SANDVIK LATHE HOLDER 570 32RF 20 with 570-DDXNL-32-11

  • Medina, Ohio, United States
  • Jan 30th
SANDVIK LATHE HOLDER 570 32NG 20 with 570-DDXNL-32-11

SANDVIK LATHE HOLDER 570 32NG 20 with 570-DDXNL-32-11

  • Medina, Ohio, United States
  • Jan 30th
USED INVOLUTE GEAR CUTTER #1 6.283P 1/2P 135-Rack 7/8" bore HSS Brown And Sharpe

USED INVOLUTE GEAR CUTTER #1 6.283P 1/2P 135-Rack 7/8" bore HSS Brown And Sharpe

  • Kelly, North Carolina, United States
  • Jan 30th
Hardinge UM-TM low-high speed handles and parts

Hardinge UM-TM low-high speed handles and parts

  • Gatineau, Quebec, Canada
  • Jan 30th
ALBRECHT 5/16" ( 8mm ) KEYLESS DRILL CHUCK W/ 1/2" SHANK FOR MILL PRESS

ALBRECHT 5/16" ( 8mm ) KEYLESS DRILL CHUCK W/ 1/2" SHANK FOR MILL PRESS

  • Chino, California, United States
  • Jan 30th
AIR DRIVEN CUT OFF SAW

AIR DRIVEN CUT OFF SAW

  • Knoxville, Tennessee, United States
  • Jan 30th
Roll-in Industrial Vertical Metal Cutting Band Saw

Roll-in Industrial Vertical Metal Cutting Band Saw

  • Fort Lauderdale, Florida, United States
  • Jan 30th
Dennison 6-Ton Multipress C-Frame Type Hydraulic Press - Used - AM10791

Dennison 6-Ton Multipress C-Frame Type Hydraulic Press - Used - AM10791

  • Cleveland, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies