9 Ft Mobile Food Truck Or Concession Trailer Grease Exhaust Vent Hood W/fan

US $2,079.00

Tulsa, Oklahoma, United States
Jan 31st

Open on mobile:
QR code

9FT Low Proximity Exhaust Hood Our most popular Concession Vent Hood! Custom built for Concession Mobile Trailers This is a new low height hood system designed specifically for Trailers in the Concession Restaurant Business. The exhaust fan mounts at the top edge of the concession trailer with mounting brackets for the fan provided. Piping and installation are not included here and is provided by the installers you will be using. Photos shown do not include cooking equipment, stands, tables or piping. Features: Free Shipping to any business only address in the lower 48 United States! Hood Dimensions: 9 FT Long X 2 FT Depth X 13" Height (not including exhaust riser) Commercial Concession Kitchen Hood System complete with exhaust motor & bracket for mounting motor 9' length Constructed of #430 Stainless Steel where exposed Kleen-Gard Stainless Steel Baffle Filters with handles, UL Classified (1) 1/2 pint slotted grease cup (1) 1/4 HP 115V 4.0 Amp, High Speed Direct Drive Centirifugal upblast exhaust fan with speed controller and mounting bracket Typical lead time is approx 10 working days from factory If shipping to North Carolina or Oklahoma, buyer pays sales tax (extra). NOTE: There are some areas in the country where the local code requires a fire suppression system in concession trailers. This advertised price does not include fire suppression. If needed, fire suppression is priced separately and is field installed when the hood arrives at your location. If you need fire suppression, please ask for a price. SHIPPING INFORMATION: Free shipping to a non-residential "Business Only Address", this means we cannot ship to a residence free due to higher shipping rates. IF you do not have a business address to ship to, you can request a "dock pickup". This means you can also pick up this shipment at the local freight terminal in your area (differs depending on which freight company we use). Please Note: Add $75.00 for lift gate service. Call ahead service is extra and not included. IMPORTANT FREIGHT INFORMATION: Keep in mind that you, the end user are responsible for inspecting the venthood for freight damage upon arrival to you're location, and to take notation of any damage on the freight bill before signing and accepting the delivery. Any freight claims are between you the customer and the freight carrier. SPECIFICATIONS: The model BLL is a low proximity passover type hood. Hood shall have size, shape and performance specified on drawings. Construction shall be type 430 stainless steel with a #3 or #4 polish where exposed. Individual component construction shall be determined by manufacturer, ETL, and NSF. Construction shall be dependent on the structural application to minimize distortion and other defects. All seams, joints and penetrations of the hood enclosure to its lower outermost perimeter that directs and captures grease-laden vapor and exhaust gases shall have a liquid-tight continuous external weld in accordance with NFPA 96. Hood shall be wall type with provisions to screw to back wall. Ventilator shall be furnished with UL classified aluminum/stainless steel baffle filters, supplied in size and quantity as required by ventilator. The filters shall extend the full length of the hood and the filler panels shall not be more than 6" in width. The hood manufacturer shall supply complete computer generated submittal drawings including hood sections view(s) and hood plan view(s). These drawings must be available to the engineer, architect and owner for their use in construction, operation and maintenance. Exhaust duct collar to be 4" high with 1" flange. Duct sizes, CFM and static pressure requirements shall be as shown on drawings. Static pressure requirements shall be precise and accurate; air velocity and volume information shall be accurate within 1-ft increments along the length of the ventilator. The hood shall have: The grease drain system shall be an enclosed integral part of the hood back and have slope with an exposed, removable 1/2 pint grease cup to facilitate cleaning. Low profile design to allow plate shelf and passover design. The hood shall be ETL Listed as "Exhaust Hood Without Exhaust Damper", NSF Listed and built in accordance with NFPA 96. The hood shall be listed for 400° F cooking surfaces at 110 CFM/ft. All seams shall be welded and have stainless steel on exposed surfaces. Unexposed surfaces shall be constructed of aluminized steel.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Manufacturer	Captive-Aire
Country of Manufacture	United States
Model	2412ELLP