+ Post new Ad
90 RPM 6-12V Precision Gearmotor (Max Torque:138.8oz-in) 50:1 gear ratio #638238, US $34.99 – Picture 0
90 RPM 6-12V Precision Gearmotor (Max Torque:138.8oz-in) 50:1 gear ratio #638238, US $34.99 – Picture 0

90 Rpm 6-12v Precision Gearmotor (max Torque:138.8oz-in) 50:1 Gear Ratio #638238

US $34.99

  • Winfield, Kansas, United States
  • Jun 9th
Open on mobile:
QR code
PRECISION GEARMOTOR  138.8* oz-in  @ 12V     50 RPM @ 12V · Operating Range: 6-12 VDC · Torque @ Stall: 138.8 oz-in.@12VDC · Gear train damage can occur if stalled (locked) - Stall Current: 1.0 Amp @ 12VDC · No load current: 120mA  · No load speed: 90 RPM · Gear ratio: 50:1  · Motor size: 1.355" Dia. x 1.70"L  · Gear size: 1.45" Dia. x 1.30"L  · Shaft size: 6mm (0.236”) Dia. x 0.715"L  · Weight: 0.504 lbs. (8.05 oz.) · DC reversible motors  · Solder type terminal  · High torque construction  · Oil bearing design for long service life · Insulation resistance: 20 MOhm · Dielectric Strength: 250VDC Don’t want to solder wires onto this gearmotor? Use  Female Crimp Terminals Compatible accessories sold separately: Motor Mounts: http://www.servocity.com/html/motor_mounts.html  End Caps: http://www.servocity.com/html/gearmotor_end_caps.html Pinion Gears; http://www.servocity.com/html/32_pitch__6mm_bore__gearmotor_.html and more: http://www.servocity.com/html/motors___accessories.html Stall Torque is the torque which is produced by a motor when the output rotational speed is zero, it may also mean the torque load that causes the output rotational speed of a motor to become zero - ie to cause stalling. Electric motors continue to provide torque when stalled. However, electric motors left in a stalled condition are prone to overheating and possible damage since the current flowing is maximum under these conditions.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand ServoCity
MPN 638238

Directions

Similar products from Servo & Stepper Motors

Maxon Motor 391109 & Maxon Gear 144039 Combo

Maxon Motor 391109 & Maxon Gear 144039 Combo

  • Mechanicville, New York, United States
  • Jun 9th
Used Sanyo servo motor P50B05020DXS07 in good working condition

Used Sanyo servo motor P50B05020DXS07 in good working condition

  • SHEN ZHEN ,GUANGDONG, China
  • Jun 9th
Allen Bradley 2090-UXNFBHF-K03 Servo Drive Cable Assembly Used

Allen Bradley 2090-UXNFBHF-K03 Servo Drive Cable Assembly Used

  • West Covina, California, United States
  • Jun 9th
Hurst 2492-618 Gearmotor 260rpm 115V 60Hz Used

Hurst 2492-618 Gearmotor 260rpm 115V 60Hz Used

  • West Covina, California, United States
  • Jun 9th
NIB ORIENTAL MOTORS 5GN120K GEAR HEAD 120:1 RATIO

NIB ORIENTAL MOTORS 5GN120K GEAR HEAD 120:1 RATIO

  • Utica, Michigan, United States
  • Jun 9th
MINEBEA qh4-4275

MINEBEA qh4-4275

  • Williamstown, New Jersey, United States
  • Jun 9th
Harmonic Drive Systems Model: CS-11-100-1U-SP <

Harmonic Drive Systems Model: CS-11-100-1U-SP <

  • Phoenix, Arizona, United States
  • Jun 9th
Used Sanyo servo motor P50B08075HXS00 in good working condition

Used Sanyo servo motor P50B08075HXS00 in good working condition

  • SHEN ZHEN ,GUANGDONG, China
  • Jun 9th
Used SANMOTION servomotor P50B08075HXS1J in good working condition

Used SANMOTION servomotor P50B08075HXS1J in good working condition

  • SHEN ZHEN ,GUANGDONG, China
  • Jun 9th
GE Sanyo Denki Stepping Motor 103-770-01411 DC 5.1V 1.0A

GE Sanyo Denki Stepping Motor 103-770-01411 DC 5.1V 1.0A

  • Miami, Florida, United States
  • Jun 9th
Used Yaskawa servo motor SGMAS-08A2A21-Y2 in good working condition

Used Yaskawa servo motor SGMAS-08A2A21-Y2 in good working condition

  • SHEN ZHEN ,GUANGDONG, China
  • Jun 9th
Merkle Korff 24 VDC Gear Motor S0617 F 02299 039370

Merkle Korff 24 VDC Gear Motor S0617 F 02299 039370

  • Cherry Valley, Arkansas, United States
  • Jun 9th
1pcs Used Yaskawa servo motor SGML-08AF14 + SGDL-08AP tested OK

1pcs Used Yaskawa servo motor SGML-08AF14 + SGDL-08AP tested OK

  • SHEN ZHEN ,GUANGDONG, China
  • Jun 9th
1pcs Used Yaskawa servo motor SGML-08AF14 tested OK

1pcs Used Yaskawa servo motor SGML-08AF14 tested OK

  • SHEN ZHEN ,GUANGDONG, China
  • Jun 9th
Reliance Electric P56X3164H 1/2 HP 3 Phase 230/460 VAC 1725 RPM FB56C P56X3164

Reliance Electric P56X3164H 1/2 HP 3 Phase 230/460 VAC 1725 RPM FB56C P56X3164

  • Napoleon, Ohio, United States
  • Jun 9th
Vexta PK596-NAA 1.15 VDC 2.8 Amp Stepping Motor 5 Phase 0.72 Step PK596NAA

Vexta PK596-NAA 1.15 VDC 2.8 Amp Stepping Motor 5 Phase 0.72 Step PK596NAA

  • Napoleon, Ohio, United States
  • Jun 9th
Electra 5E34810XE EK143TC 1/2 HP 3 P 230/460 VAC 1725 RPM Dresser 5E 34810 XE

Electra 5E34810XE EK143TC 1/2 HP 3 P 230/460 VAC 1725 RPM Dresser 5E 34810 XE

  • Napoleon, Ohio, United States
  • Jun 9th
Reliance Electric P56H3430M 1/2 HP 3 Phase 230/460 VAC 1725 RPM FA56C

Reliance Electric P56H3430M 1/2 HP 3 Phase 230/460 VAC 1725 RPM FA56C

  • Napoleon, Ohio, United States
  • Jun 9th
BR-AUTOMATION 8MSA2L.R0-42 SERVO DRIVE, 6000 RPM, 330V

BR-AUTOMATION 8MSA2L.R0-42 SERVO DRIVE, 6000 RPM, 330V

  • Buford, Georgia, United States
  • Jun 9th
Baldor Motor M3531 0.25HP 1140RPM 56 Frame 230/460V 1.4/0.7A New Surplus

Baldor Motor M3531 0.25HP 1140RPM 56 Frame 230/460V 1.4/0.7A New Surplus

  • Minneapolis, Minnesota, United States
  • Jun 9th

People who viewed this item also vieved

16mm Bore 20mm Stroke CDJ2B Pneumatic Air Cylinder

16mm Bore 20mm Stroke CDJ2B Pneumatic Air Cylinder

  • Zhejiang, China
  • Jan 29th
16mm Bore 40mm Stroke CDJ2B Pneumatic Air Cylinder

16mm Bore 40mm Stroke CDJ2B Pneumatic Air Cylinder

  • Zhejiang, China
  • Jan 29th
16mm Bore 60mm Stroke CDJ2B Mini Pneumatic Air Cylinder

16mm Bore 60mm Stroke CDJ2B Mini Pneumatic Air Cylinder

  • Zhejiang, China
  • Jan 29th
16mm Bore 50mm Stroke CDJ2B Pneumatic Air Cylinder

16mm Bore 50mm Stroke CDJ2B Pneumatic Air Cylinder

  • Zhejiang, China
  • Jan 29th
16mm Bore 15mm Stroke CDJ2B Pneumatic Air Cylinder

16mm Bore 15mm Stroke CDJ2B Pneumatic Air Cylinder

  • Zhejiang, China
  • Jan 29th
SURUKA SEIKI XSG 60 70700743-13 High Precision Linear Stage

SURUKA SEIKI XSG 60 70700743-13 High Precision Linear Stage

  • ?????, SP, Thailand
  • Jan 29th
2x ?16mm Linear Ball Bearing Block For CNC Milling Machine Lathe XY Table Router

2x ?16mm Linear Ball Bearing Block For CNC Milling Machine Lathe XY Table Router

  • default, default, Hong Kong
  • Jan 29th
2x ?20mm Linear Ball Bearing Block DIY CNC Milling Machine Lathe XY Table Router

2x ?20mm Linear Ball Bearing Block DIY CNC Milling Machine Lathe XY Table Router

  • default, default, Hong Kong
  • Jan 29th
Del-Tron Translation Stage with 1.5&#034; travel 2 5/8&#034; x 2 5/8&#034;

Del-Tron Translation Stage with 1.5" travel 2 5/8" x 2 5/8"

  • Ventura, California, United States
  • Jan 29th
NSK LS15 + 650MM LINEAR BALL BEARING LM GUIDE 2RAIL 4BLOCK CNC ROUTER

NSK LS15 + 650MM LINEAR BALL BEARING LM GUIDE 2RAIL 4BLOCK CNC ROUTER

  • SEOUL , Korea, South
  • Jan 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies