Ac110v-220v 40w Co2 Laser Power Supply For Laser Engraver Engraving Machine

US $780

  • Hong Kong, Hong Kong
  • Jan 30th
AC110V-220V 40w co2 laser power supply for laser engraver engraving Machine                               Brand New 40W CO2 Laser Power Supply Engraver/ Engraving Equipment This high frequency CO2 laser power supply is dedicated for CO2 laser device, with high efficiency, high frequency and short response time. The compact and handy power supply has excellent compatibility with laser device and can be directly connected. With this power supply, laser device will be easily started up and well operated with higher conversion efficiency and longer expectation of life. Used with some specific laser device, peak output power of the laser would be up to 50W and average output power is 40W. The power is adjustable through it's TTL control or by a 5K variable resistor. It supports any CO2 laser for up to 40Watt. Small design with excellence PWM control circuitry. Feature: Fast response speed and effect. Dramatically lengthen the life of laser. Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc. The power supply has open circuit protection: Under the condition of good protective earthling, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power. Application: acrylic sculpture, cut; fabric sculpture, cut; rubber sheet sculpture, etc. Technical Parameters: 1.Input voltage: AC110V-220V 2.Maximum output voltage: DC 25KV. 3.Maximum output current: DC 20mA. 4.Isolation Withstand voltage: Input-output, input-enclosure: AC2000V-10mA-60s; negative pole of output connected to enclosure. 5. Protection: with well-grounded enclosure, output circuit of power supply can be open for short time (but arc between positive pole and enclosure should be avoided). 6.Response time (from time of input being available to the output current being up to nominal value):

Directions

Similar products from Laser Modules

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies