Agilent 83433a 10gb/s Lightwave Transmitter

US $8,500.00

San Jose, California, United States
Jan 29th

Open on mobile:
QR code

FRM5W231DR Model Number 83433A Manufacturer Agilent Description Agilent 83433A 10Gb/s Lightwave Transmitter Specification Please visit http://cp.literature.agilent.com/litweb/pdf/83433-90001.pdf Features The Agilent 83433A lightwave transmitter is based on a lithium niobate modulator driven by an internal CW DFB 1552.52 nm laser. The laser and modulator are inter-connected externally with a PMF fiber. The modulator can also be used with an external laser with polarization maintaining fiber such as the Agilent 8164A, with 81680A option 071. The Agilent 83433A is designed to produce high fidelity, low jitter waveforms for 2.488 Gb/s STM-16/OC-48, 9.953 Gb/s STM-64/OC-192 and other transmission rates up through 10.7 Gb/s. The Agilent 83433A is intended for BER testing with error performance analyzers such as the Agilent 71612B. The Mach-Zehnder modulator is adjusted for a fixed zero chirp. Its output waveform produces a minimum extinction ratio of 12 dB. The internal DFB laser can be modulated at frequencies from 15 kHz to 10 MHz to increase linewidth for SBS suppression or channel identification applications. The internal laser wavelength can be adjusted ±1.25 nm around the 1552.52 center wavelength. The Agilent 83433A can be combined with the Agilent 83434A 10 Gb/s lightwave receiver to create a complete optical link for system or fiber testing, or to form a basis for substitution testing of commercial transmitters and receivers Pictures Contact Email: sales@hjprofessional.com Tel: 408 528 7552 Accessories None Delivery Buyer is responsible for shipping cost. We use FedEx ground, UPS ground or USPS in the States unless requested differently. International shipping is subject to discussion. Conditions Used in excellent condition Warranty If you find the item delivered defective on arrival, please immediately inform us and return it to us within seven days against an RMA number. We will refund you excluding the shipping and handling. Any damages resulted from misuse such as statistic electricity damage, breakage due to drop or excessive force, and any physical changes to the item such as fiber cut, pin soldering, seal remove and so on will void the warranty, Payment We accept: Paypal (shipping to confirmed address only), money order, cashier check, wire transfer, checks (not shipping until cleared) for some items. Please ask for detail before sending the payent. Products we sell Active components: Pump laser at 1480, 980nm; DFB laser Photo diode detector Switch and attenuator Passive components: Isolator WDM filter and module Coupler PM combiner and tap EDM, tap, isolator combo AWG module Er doped fiber PM fiber and SMF fiber Test and measurement Instrument Tunable laser Programmable switch Optical spectrum analyzer Fiber fusion splicer and accessories RF electronics Digital oscilloscope DCA Polarization analyzer Optical microscopes Services Help sell your surplus equipment Buy surplus equipment Calibrate and repair photonics equipment Distribute your products in North America Educational discount for some expensive items, please ask. Purchase Agreement Buyer agrees it is his/her responsibility for the proper use of items purchased from seller and holds seller free of any liability for injury, loss or death resulting from use or misuse. Seller will not be liable for any loss of profits, loss of data, loss of use or interruption of business, or indirect damages of any kind, whether seller had advance notice of the possibility of such damages. Seller will not be responsible for typographical or other errors or omissions regarding to product specifications, prices or other information. All sales are subject to seller's Terms and Conditions of sale.