Agilent HP 4193A 400kHz-110MHz Vector Impedance Meter, US $1,100.00 – Picture 0

Agilent HP 4193A 400kHz-110MHz Vector Impedance Meter, US $1,100.00 – Picture 1

Agilent HP 4193A 400kHz-110MHz Vector Impedance Meter, US $1,100.00 – Picture 2

Agilent HP 4193A 400kHz-110MHz Vector Impedance Meter, US $1,100.00 – Picture 3

Agilent HP 4193A 400kHz-110MHz Vector Impedance Meter, US $1,100.00 – Picture 4

Agilent HP 4193A 400kHz-110MHz Vector Impedance Meter, US $1,100.00 – Picture 5

Agilent Hp 4193a 400khz-110mhz Vector Impedance Meter

US $1,100.00

United States
Jan 29th

Open on mobile:
QR code

Agilent HP 4193A 400kHz-110MHz Vector Impedance Meter Agilent HP 4193A 400kHz-110MHz Vector Impedance Meter PLEASE READ & AGREE TO THE FOLLOWING TERMS AND CONDITIONS BEFORE BIDDING PLEASE SEE PICTURE & READ OUR ADVERTISEMENT; WHAT YOU SEE & WHAT YOU READ IS WHAT YOU ARE BIDDING ON Please make sure you need this product !! We reserve 72 hours of testing period! This HP4293A is used. Cosmetically estimated 7 from 10 some minor scratches and discoloring could be founding all over the casing For sell: 1 x Agilent HP 4193A 400kHz-110Mhz Vector Impedance meter Probe is not added. The images are actual instrument we are auctioning. Nothing more is added or promised. Please bid accordingly! Agilent HP 4193A 400kHz-110MHz Vector Impedance Meter This instrument had been tested just for powering. No other test was performed . Please bid accordingly! The HP / Agilent 4193A Vector Impedance Meter measures impedance magnitude and phase. An internal oscillator provides test signals from 400 kHz to 110.0 MHz. The test signal is a constant current between 10µA and 100µA, depending on |Z| range. Features: Test components in-circuit and out-of-circuit Measure impedance magnitude (10 mOhm to 120 kOhm) and phase (-180.0 to +180.0) Fixtures include low-grounded probe, spring clip fixture, and binding post fixture Standard HP-IB and analog outputs Specification Test Signal Out: Frequency Range 400 kHz to 110.0 MHz Frequency Control Spot: Spot frequency is set using coarse, medium and fine controls Full sweep: Logarithmic sweep at 43 points over full range of 400 kHz to 110 MHz Partial Sweep: Linear sweep from selected START to STOP frequency Impedance Meter: Input Configuration Low-grounded probe (furnished) Digital Display of Impedance: 3 1/2 digits 0 to 1999 counts (0 to 120 counts on 100 kOhm range) -1800 to +1800 counts (-180 to +180 counts on 100 kOhm range) Measurement Range Five decade ranges: 10 Ohm, 100 Ohm, 1 kOhm, 10 kOhm, 100 kOhm Minimum (sensitivity): 10 mOhm Maximum (sensitivity) : 120 kOhm One range: -180.0° to +180.0° Tested, Guaranteed NON DOA Thank you for Bidding! Bidding Terms: Bidders with 0 or negative feedback: Please e-mail us before bidding, otherwise your bids may be voided. International bidders: Please contact us first to discuss about shipping cost and custom dues issue. Please, be advise that title for parcel such as: " gift' , " broken ", " for parts " will be consider just in case such actual condition and status of merchandise is specified. This auction includes only what is pictured, and described at our auction's notice and title, unless stated otherwise. DO NOT BID IF YOU DO NOT INTENDED TO BUY. Customer to pay shipping / handling California customers have to pay 8.75% of sale tax. 72 hours checking period after receiving, if other is not specified. No claims will be accepted after 72 hours upon receiving of the parcel. 3 days return period is granted unless other is specified. You may be interested in our other listings on eBay.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Agilen HP
Country of Manufacture	United States
Model	HP4193A