Altek 334a Process Loop Calibrator 334aaltek

US $944.25

Melrose, Massachusetts, United States
Jan 29th

Open on mobile:
QR code

Altek 334A Process Loop Calibrator New - Factory Authorized Distributor - Factory Warranty All 4 to 20 mA Loop Functions Source 0.00 to 24.00 mA or -25.0 to 125.0% read mA or percent to 52.00 mA, simulate 2-wire transmitters, measure -99.99 to 99.99 volts DC power & read 2-wire transmitters. Quik-Chek Switch Select 4 or 20 mA output or 2-wire simulation. Accurate to A±0.006 mA. Full Range 10 Microamp Resolution Adjust 4 digit display to A±0.05% without range change. Long Battery Life 3x9 volt alkaline batteries source 20 mA for over 20 hours, 12 mA for over 33 hours; 2-wire simulate and read for 150 hours. Much longer than NiCd batteries or calibrators with a single 9 V battery! Drive Capability 1200 Ohms with current limited, fuseless protection to 135 V AC/DC. Altek 334A Shown The Altek 334A will check, calibrate and measure all your current signal instruments in a 4 to 20 milliamp DC loop. Use at every point in your loop. Source & Read 0.00 to 24.00 mA, Simulate a 2-wire transmitter or use the Model 334A to simultaneously power & measure your 2-wire transmitters. Toggle the display to show milliamps or percent of 4 to 20. Calibrate recorders, digital indicators, stroke valves or any other instruments that get their input from a 4 to 20 mA loop. Easily set any value to within 0.01 mA with the speed sensitive digital potentiometer. The "Quik-Chek" switch provides rapid checking of 4.00, 20.00 and a third point between 0.00 to 24.00 mA. Check loop wiring and receivers by using the Model 334A in place of a 2-wire transmitter. Simulate a changing process input to check loop response and control settings. The Model 334A uses any loop power from 3 to 45V DC. Check controller outputs or measure the milliamp signal anywhere in the loop. The Model 334A measures 0.00 to 24.00 mA signals with much greater accuracy than a typical multimeter. Toggle the display to show milliamps or percent of 4 to 20. Simultaneously measure the output of a 2-wire transmitter while using the internal batteries to supply up to 27V DC to power the transmitter. Handy for checking transmitters in the field or on the bench. Measure from -99.99 to 99.99 VDC with 10mV resolution. Use it to check loop power supplies, I/V converters, 1 to 5 Volt signals and battery voltages. Included Accessories 1 - Nylon Carrying Case w/ Shoulder Strap and Belt Loop 1 - Instruction Manual Included Click here for complete specifications FREE Fed-Ex Ground Shipping on items OVER $75 to continental U.S. PO Boxes/APOs require USPS shipping, may experience longer lead times. 6.25% Sales Tax for shipping to Massachusetts (Add an additional $24 for shipments to AK, HI, or PR.) Terms and Conditions Have a Question? Send us a message (Contact Seller). We are shipping from just north of Boston, MA in the United States. For international customers, do not assume a product will work in your country due to various International Voltage requirements. Ask first if you are not sure. Warranty (New Items): If the item is found to be defective within 7 days of arrival, we will refund or replace personally. Past 7 days, please contact the Manufacturer. The Manufacturer?s warranty can typically be found in the User Manual supplied with the product. In case of returns, buyer is responsible for shipping charges. (Domestic or International) Warranty (Refurbished Items): 7 day Right of Return. If the item is found to be defective, contact us to be issued an RMA. Warranty Returns do not apply to listings that indicate: requires parts, needs repair, or as-is in the title and/or description. In case of returns, buyer is responsible for all shipping fees. (Domestic or International) Payment terms: We accept payment prior to shipping with PayPal. International Shipping Terms: (Please Read International Customers) * International customers are responsible for all shipping charges, including any duties or taxes that may be enforced by their respective country. * USPS is the most economical shipping method for international customers. With this often comes a slightly delayed lead-time or erratic tracking information. We ask for your patience, and we will do the best we can to see you get your shipment quickly and accurately. * It is recommended a UPS or Fed-Ex account is used when available to provide faster and more accurate shipping. Feedback: We appreciate your Positive feedback. We leave feedback for buyers as soon as our transactions complete. If you have any problems with the sale, we will do anything within reason to correct or improve your experience. If negative feedback is left prior to an attempted resolution, we reserve the right to accept that as the final resolution. We will not accept a return or issue a refund. *Note Estimated Delivery time above. Please contact us if you require specific details, or have a required delivery date. Please contact us for shipping rates to any overseas US territories including: Northern Mariana Islands, Guam, Puerto Rico, Palau, U.S. Virgin Islands and American Samoa.

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

UPC

95969021418