Amprobe Acdc-100 1000a Ac/dc Clamp Meter New

US $148.04

United States
Jan 29th

Open on mobile:
QR code

Amprobe ACDC-100 1000A AC/DC Clamp Meter Free Expedited Shipping Through Christmas! Return Policies We offer a 14 day return policy from checkout winning date. An RMA number is required for all returns. Message us for return instructions. Items returned without a RMA number will not be processed. Items defective upon receipt must be packaged in their retail packaging as if new and returned with a detailed description of the problem. Return shipping fees are not refundable. We reserve the right to decline any returns if the above guidelines are not followed. Features Digital clamp meter measures alternating current (AC) to 800 amp, direct current (DC) to 1,000 amp, DC voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfas, and resistance to 40 megaohms Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform Hall-effect current clamp with 2" (50 mm) jaw opening measures current without toung or interrupting the circuit Inrush reading displays measurement of entire motor inrush period at startup Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V Item Description The Amprobe ACDC-100 digital clamp meter is an average-sensing, auto- or manual-ranging multimeter for measuring current, voltage, capacitance, and resistance in electrical testing applications. It has a Hall effect clamp that measures alternating current (AC) to 800 amp and direct current (DC) to 1,000 amp. The meter comes with detachable test leads that measure DC voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfas, and resistance to 40 megaohms. The clamp has two jaws that can close around an electrical conductor up to 2" (50 mm) in diameter to measure current without toung or interrupting the circuit. The inrush reading displays measurement of entire motor inrush period at startup. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing for quick comparison of multiple readings. The maximum reading mode displays the highest reading in a session to track a sudden increase in measurements. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether a circuita??s diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. The backlit liquid crystal display (LCD) is visible in low light. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter has an impact- and wear-resistant molded ruer body with a probe holder. A finger guard on the body of the meter helps protect fingers from shock. This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and will automatically select the correct operating range for the property being measured. It can be switched to manual-ranging mode, which requires that the operator choose the appropriate operating range. The meter has a 4,000-count resolution, meaning it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V, which covers items used with enclosed building circuit installations (service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply). The unit comes with a soft vinyl carrying case with built-in probe storage. Specifications Maximum alternating current (AC) input 800 amp Maximum direct current (DC) input 1,000 amp Maximum AC voltage input 600 volts (V) Maximum DC voltage input 600V Maximum resistance detected 40 megaohms Maximum capacitance detected 3,000 microfas Power supply 1.5V NEDA 24G, IEC R03, NEDA 24A, IEC LR03 AAA batteries (two, installed) Standards met and certifications European Normal (EN); International Electrotechnical Commission (IEC) and EN safety standard 61010-1; European Conformity (CE); Underwriters Laboratories (UL); and Australia N10140 Weight 0.6 lb./290 g Meter dimensions 1.6 x 3.1 x 1.6 inches/227 x 78 x 40 mm (H x W x D) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Clamp meters (also called clamp-on meters) measure electrical current without cutting through wires or toung or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. The meter's current clamp has two jaws that fit around a conductor to take measurements. All clamp meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages determine meter choice. Safety ratings are based on the International Electrotechnical Commission's (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating. Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA. Whata??s in the Box?ACDC-100 average-sensing digital clamp multimeter Test lead set (2) 1.5V AAA batteries (installed) Vinyl carrying pouch with built-in probe storage Instructions Details Manufacturer: Amprobe Item Dimensions Length: 11.9" Width: 6.6" Height: 3.2" Weight: 1.55 pounds Comunication If you have a problem or question regarding your transaction please contact us before leaving any type of feedback. We will work with you to resolve any problem you may have. Feedback Due to the large number of feedback we receive, our automated system will leave feedback for you as soon as we receive your payment. Shipping Our standard shipping service is free, your order will be processed within 3-4 business days after your payment. Transit time varies from 2-5 business days. Expedited shipping takes 2-3 business days. One Day shipping takes 1-2 business days and usually ships within 12 hours. We only ship within the continental USA, we do not ship to Alaska, Hawaii, Puerto Rico, APO addresses or any other USA territory. We only ship to the confirmed Paypal address. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses.

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

UPC

095969370004