Amprobe Cr50a Capacitance And Resistance Tester

US $130

USA, United States
Jun 5th

Open on mobile:
QR code

Amprobe CR50A Capacitance and Resistance Tester Buy with confidence from a trusted seller - seeMy Other Items Description Tests capacitance and resistance to check functionality and compatibility of electrical circuits and devices Zero-adjust pots help eliminate stray resistance and capacitance for more accurate readings Comes with a set of detachable test leads with test probe tips and two alligator clips for a more secure, hands-free connection than probe tips Diode test checks for proper functioning of the circuit's diodes Audible continuity buzzer confirms that a circuit is capable of conducting current Resistance: 20 , 200 , 2 k, 20 k, 200 k, 2 M, 20 M Resolution: 0.01 in 20 Open Circuit Voltage: 20 and 200 All Other Ranges: 0.3 VDC Display Update Rate: 2/sec, nominal Features The Amprobe CR50A digital capacitance and resistance tester checks functionality and compatibility of electrical circuits and devices in home and industrial maintenance applications. When set to the low resistance or low capacitance ranges, the unit's zero-adjust pots help eliminate stray resistance and capacitance for more accurate readings. The included set of detachable test leads have test probe tips that are held against the conductor during use and shrouded banana plugs that help prevent shock if the plugs accidentally pull out of the meter while in use. The meter also comes with two alligator clips that fit on to the test probe tips to provide a more secure, hands-free connection than the probe tips. The meter's diode test checks for proper functioning of a circuit's diodes, and an audible continuity buzzer confirms that a circuit is capable of conducting current. The Amprobe CR50A is a manual-ranging meter and requires that the operator choose the appropriate operating range. The liquid crystal display (LCD) has a 2,000-count resolution, meaning it can display up to 1,999 units (3-1/2 digits) before the operating range needs to be changed. A low-battery indicator signals when the batteries need to be replaced. The meter comes with a carrying holster. Specifications Maximum resistance detected 20 megaohms Maximum capacitance detected 20 millifarads Power supply 9V NEDA 1604, JIS 006P, or IEC 6F22 transistor battery Fuse 0.1 amp/250V fuse (one installed, one spare) Standards met European Conformity (CE), International Electrotechnical Commission (IEC) and European Normal (EN) 61010-1, N10140 Australia Weight 200 g/8 oz. Dimensions 6.1 x 2.8 x 1.3 inches/151 x 70 x 38 mm (H x W x D) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages. Safety ratings are based on the International Electrotechnical Commission's (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating. Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA. What?s in the Box?CR50A capacitance and resistance tester (1) Set of test leads (2) Alligator clips (1) 9V battery (installed) (2) 0.1 amp/250V fuse (one installed, one spare) Carrying holster Instructions Additional Information Manufacturer: Amprobe Shipping Weight: 120 Product Dimensions: Width: 7.20 Length: 10.20 Height: 1.80 Shipping is always free to the continental USA! Most items will be shipped within 24 hours after processing your payment. Check our feedback to see our many satisfied customers who love our fast shipping! Buy with confidence from a trusted seller - seeMy Other Items Terms and Conditions Payment We accept Paypal only All major credit cards are accepted through Paypal's secure payment system Payment with Paypal is instant and offers buyer protection, so you never need to worry about your purchase! Returns We provide a 30 day return policy for a full refund Returned items must be in original packaging and in original condition We do not cover postage for returned items Please allow 7 days after we receive your returned item to process the return and refund Shipping Shipping is by USPS or UPS, depending on your location and package weight. All items are shipped from one of our USA warehouses. We have a 2 business day handling time to get your package ready and out the door. For free shipping, please allow an additional 4 business days for your package to arrive. If you choose expedited shipping, please allow an additional 2 business days. Our Guarantee We offer a 100% Satisfaction Guarantee on all sales. If you are not happy with your purchase for any reason, please contact us within seven days of receipt of your item. We will happily work with you to find a solution to any problem. We want your eBay experience to be a good one. As you can tell from our feedback, almost every customer is a happy one. Our goal is always a satisfied customer. In the rare case something goes wrong, before leaving negative feedback, please contact us so we can help make it right! By committing to buy you are agreeing to the Terms & Conditions stated above.