Anritsu Ms8609a Digital Mobile Radio Transmitter Tester 3g Spectrum Analyzer

US $6200

Roseville, California, United States
May 24th

Open on mobile:
QR code

Anritsu MS8609A digital mobile radio transmitter tester 9kHz - 13.2GHz The Anritsu MS8609A transmitter tester is equipped with an internal spectrum analyzer, a modulation analyzer and a power meter. Just one tester can cover the development and manufacturing of base stations and mobile stations, as well as the construction and maintenance of base stations. MS8609A supports 9kHz-13.2GHz and input power up to +20dBm. The spectrum analyzer has resolution bandwidths up to 20MHz, meaning that it can readily support measurements of wide-band signals. The modulation analyzer realizes all Vector Signal Analysis (VSA) functions through high-speed DSP. The power sensor can perform highly accurate power measurements of +/-0.4dB by using an amorphous power sensor. Up to three measurement software options (such as W-CDMA, GSM/EDGE, HSDPA, WLAN/802.11, CDMA, 1xEVDO) can be installed simultaneously. Input signals can be selected from RF or I/Q inputs. For I/Q signals, balanced or unbalanced input can also be selected. Each tester can be equipped with optional GPIB, RS-232C, and 10BASE-TEthernet interfaces for remote measurement. High-speed GPIB data transmission of 120 kbyte/sec enables high-speed measurement on the manufacturing line. The monitor uses an easy-to-see TFT color LCD. Features excellent performance for evaluating W-CDMA modulation signals. This makes it ideal for the development and manufacture of W-CDMA radio transmitters (base station and mobile).GSM/EDGE HSDPA, WLAN/802.11, CDMA, 1xEVDO, and Pi/4DQPSK (PHS, PDC, IS-136) measurements are also supported. The built-in spectrum analyser (standard) covers a resolution bandwidth of up to 20MHz. It is ideal for evaluating devices such as base station power amplifiers, due to its wide dynamic ranges of 68dB (typical for 5MHz offset) and 75dB (typical for 10MHz offset) for adjacent channel power (ACP) measurement (sweep method). A new average detection mode permits high-accuracy measurement of signal power with this noise-like spreading modulation. The built-in power meter (standard) integrates an amorphous power sensor for high-accuracy (+-0.4dB) power measurements. used, TESTED. powers up. HANDLE MISSING. minor cosmetic issues. You are bidding on the pictured item only. Unit is sold AS-IS no warranty. Buyer may return the item and is responsible for shipping charges. tel: 877-417-7413 EBAY SALES TERMS AND CONDITIONS ***all Paypal purchases must deliver to a confirmed address*** The sale of all equipment described herein is conditioned upon the Terms and Conditions contained herein. Any additional or different terms that are proposed by the customer are hereby objected to and will not be binding upon Liberty Test Equipment unless specifically agreed to in writing by Liberty Test Equipment. Any order for or any statement of intent to purchase hereunder or any direction to deliver equipment shall constitute the customer's acceptance of all of Liberty Test Equipment's Terms and Conditions that are stated herein. SHIPMENT F.O.B. point is Liberty Test Equipment's Inventory Center from which the shipment is made. Shipment will be made at the customer's expense in accordance with Liberty Test Equipment's standard shipping and handling charges. The seller will not be responsible for damage to uninsured shipments. EXCUSABLE DELAYS Delivery dates are approximate. Liberty Test Equipment shall not be liable for delays in shipment due to causes beyond its reasonable control, including but not limited to acts of God, acts of the customer, acts of civil or military authority, governmental priorities, strikes, fires, floods, epidemics, war, riot, delays in transportation or car shortages, or inability because of any cause beyond the reasonable control of Liberty Test Equipment to obtain necessary materials, components, services or facilities. In the event of such delay, the date of the shipment shall be extended for a period equal to the time lost by reason of such delay. PAYMENT Payment shall be in advance of shipment. Liberty Test Equipment accepts Paypal, Visa, MasterCard, American Express, and Discover. All payments are to be made in U.S. dollars. CUSTOMER'S OBLIGATIONS The customer agrees to and shall be fully responsible for any loss of, or damage to, the equipment for any cause whatsoever. The customer shall pay all repair costs for any loss of, or damage to, the equipment. WARRANTY There is no warranty. FEEDBACK Liberty Test Equipment shall provide feedback after receiving the customer's feedback. Ebay relies on trust built by its users to ensure satisfactory and safe transactions in the future. With that said, negative feedback cuts both ways. We would be more than pleased to try to solve any issue that may have come up as a result of any equipment that you have purchased from us. Give us a chance and you will be pleased. The foregoing shall constitute the sole remedy of the customer and the sole liability of Liberty Test Equipment.