Apache Al18p Laminator 18" A3 4 Roller Hot Cold Pcb Toner Transfer Paper Al13p

US $800

Heath, Ohio, United States
Nov 7th

Open on mobile:
QR code

USED IN GREAT CONDITION. THIS WAS USED ONCE IN A WHILE BUT WE REALLY DO NOT NEED IT AS WE HAVE A 54" WE USE WHEN PRINTS ARE BIGGER THEN 12 INCHES. THESE THINGS ARE SOLID STEEL , TESTED EVERYTHING , WORKS GREAT. SORRY FOR PICTURES BEING HARD TO SEE. IF YOU NEED BETTER ONES LET US KNOW. AND WE WILL MESSAGE THEM TO YOU. THIS IS JUST THE BIG BROTHER OF THE AL13P , IT IS EXACTLY THE SAME BUT 18" , ALL STEEL - IN GREAT WORKING ORDER. THESE ARE HARD TO FIND AS A LOT OF PEOPLE USE THEM FOR PCB TONER TRANSFER. TO MAKE CIRCUIT BOARDS. BECAUSE OF THE SOLID STEEL GEARS AND HOUSING AND THE ADJUSTABLE TENSION . IT IS A TANK IT WILL NOT LAST LONG AS THEY ARE IN HIGH DEMAND. ANY QUESTIONS PLEASE ASK. he AL18P is a professional model offering both adjustable rollers and adjustable temperature. This allows the user to customize the machine to a much wider range of projects. The AL18P is also built mostly of steel, has four very large rollers, uses a heavier duty motor and heating element and is capable of running for thousands of laminations. However, becoming familiar with the machine’s operation and use of its features can take some time for the new user. Additionally, the AL18P is heavy, takes up more desk space, and takes longer to set up and achieve stable temperatures. If you only laminate occasionally, have a limited number of laminations, and only laminate standard paper in standard pouches, you may find an Apache home or light office model more convenient. The Apache AL18P is the smallest laminator in Apache’s Professional line. The unit is constructed of mostly steel and weighs nearly 22 lbs. It has a 18” laminating bed but the overall units is 24.5” wide and requires a desktop footprint of approximately 26x30” for operation. The zinc-plated steel base plate alone weighs nearly 5lb but provides the necessary stability for the four large and heavy rollers. The AL18P features four large tension-adjustable rollers made from galvanized silicone. The rollers have four, tension-adjustment screws mounted on the bottom of the unit. The tension adjustment screws control the pressure between the rollers to accommodate a wider variety of laminating product. There is a reverse control to reverse the direction of the rollers. The AL18P features adjustable temperature control from room temperature to 390 Degrees Fahrenheit. " 0 - 390 FAHRENHEIT " A large and bright, blue LED display reads the current set temperature. Most single temperature laminators are set somewhere between 240 and 300 degrees. The higher operating temperatures of the AL18P allow for lamination of thicker projects and pouches up to 7mil. Additionally, the higher and lower operating temperatures for the AL18P allow for colder wet laminating and hotter toner transfer laminating. The unit can achieve laminating temperatures in just a few minutes, but given the size of the bed and the rollers, fully stable temperatures are achieved after about 20 minutes at a constant temperature setting. The motor functions with the temperature set to 0 for room temperature or cold, pressure-only laminating.