Apollo 102s-lf Series Bronze Gate Valve Potable Water Service Class 125 Non-r

US $360

USA, United States
Jun 9th

Open on mobile:
QR code

This class 125 Apollo Valve 102S-LF series gate valve has a non-rising stem, solder end connections, and lead-free bronze construction for potable water plumbing systems. The lead-free bronze construction, solid wedge gate, and threaded bonnet provide higher strength and resistance to corrosion than brass. It has a non-rising stem that stays fixed in place when the gate is raised or lowered for low clearance or underground use, and the graphite internal packing helps prevent the valve?s stem from leaking. This stem design and the graphite internal packing also prevent the stem threads from coming into contact with flow to avoid corrosion to extend valve life. This gate valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to enable maximum operating efficiency. The maximum pressure is 150 pounds per square inch (gauge) (psig) for cold working pressure (CWP), and it has a temperature range of -20 degrees F to 406 degrees F. It has solder end connections for a semi-permanent connection to a piping system. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism, which lifts and lowers the gate to start and stop the flow between the connected pipes. This valve comes with a five-year warranty for workmanship and material defects. The valve is certified to contain no more than 0.25 percent lead by weighted average on its wetted surfaces, and it complies with California AB1953, Vermont Act 193, Maryland HB372, and federal public law 111-380 for use with public drinking water. This class 125 valve meets Manufacturers Standardization Society (MSS) SP-139 and National Sanitation Foundation/American National Standards Institute (NSF/ANSI) 61-8, Annexes F and G standards for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. The valve is appropriate for use in plumbing systems that convey or dispense water intended for cooking or human consumption. Gate valves control flow in a piping system by lifting a gate out of the path of steam, fluids, or gases. They are designed to block or permit flow, as the vibrations and force of flow repeatedly striking a partly lowered gate can damage the gate and seats. To accommodate different flows and pressure requirements, gates come in four types: solid wedge (appropriate for almost all liquid service), flexible wedge (appropriate for steam service), split wedge (appropriate for normal temperature, non-condensing gas and liquid service, including corrosive service), and parallel disc (appropriate for high and low pressure applications). Hand wheels or levers activate the screw mechanism in the valve?s bonnet, which comes in various designs, to open and close the gate. Union bonnets are preferable for building service piping, threaded-in (or screw-in) bonnets work well for lighter-duty usage, and bolted body-bonnet connections are used primarily in iron multi-turn valves. Most gate valves have either a rising stem, which moves up and down with the gate, or a non-rising stem, which remains fixed in place. When closed, the gate and its seats form tight planar sealing surfaces, ideal for linear liquid flow. Gate valves are used in air, gas, liquid, and steam applications. Conbraco Industries, Inc. manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention devices under the Apollo Valves brand. The company, founded in 1928 and headquartered in Matthews, NC, meets international standard ISO/IEC 17025:2005 and makes products that meet International Organization for Standardization (ISO) and American National Standards Institute (ANSI) standards.