+ Post new Ad
Armstrong No. 15 Heavy Duty C-Clamp, US $200 – Picture 0
Armstrong No. 15 Heavy Duty C-Clamp, US $200 – Picture 0

Armstrong No. 15 Heavy Duty C-clamp

US $200

  • Boaz, Alabama, United States
  • May 24th
Open on mobile:
QR code
The clamp is used and shows some wear as you can see in the pictures but still in good working condition.  Shipping international will be additional cost.

Directions

Similar products from Clips & Jaws

KANT TWIST Quick Acting Fixture Clamp -Model: 423-1 Holding Capacity: 3,200 lbs.

KANT TWIST Quick Acting Fixture Clamp -Model: 423-1 Holding Capacity: 3,200 lbs.

  • Duncan, South Carolina, United States
  • May 24th
MITEE BITE T-Slot Toe Clamp Width:1.12'' STYLE Two Clamping Edges T Slot 3/4''

MITEE BITE T-Slot Toe Clamp Width:1.12'' STYLE Two Clamping Edges T Slot 3/4''

  • Duncan, South Carolina, United States
  • May 24th
BESSEY Rapid Action Steel Clamp - Throat Depth: 5-1/2''

BESSEY Rapid Action Steel Clamp - Throat Depth: 5-1/2''

  • Duncan, South Carolina, United States
  • May 24th
Large Armstrong No.3 Drop Forged Welders HEAVY SERVICE C-CLAMP

Large Armstrong No.3 Drop Forged Welders HEAVY SERVICE C-CLAMP

  • Alamo, California, United States
  • May 24th
FOUR 6" T-HANDLE WELDER/MACHINIST CLAMPS

FOUR 6" T-HANDLE WELDER/MACHINIST CLAMPS

  • Chicago, Illinois, United States
  • May 24th
Starrett Machinist clamps

Starrett Machinist clamps

  • Clinton, Ohio, United States
  • May 24th
DE-STA-CO Push/Pull Low Profile Hold Down Toggle Clamp Model 210-25 Unopened!!!!

DE-STA-CO Push/Pull Low Profile Hold Down Toggle Clamp Model 210-25 Unopened!!!!

  • League City, Texas, United States
  • May 24th
9' Forked Jaw Weld Clamp

9' Forked Jaw Weld Clamp

  • Duncan, South Carolina, United States
  • May 24th
MITEE BITE 24128 T-Slot Toe Clamp

MITEE BITE 24128 T-Slot Toe Clamp

  • Duncan, South Carolina, United States
  • May 24th
MITEE BITE 24168 T-Slot Toe Clamp

MITEE BITE 24168 T-Slot Toe Clamp

  • Duncan, South Carolina, United States
  • May 24th
(5) C-Clamp Lot (2) Wilton 408> 1480-8">1460-6"> 6"(?) All U.S.A.

(5) C-Clamp Lot (2) Wilton 408> 1480-8">1460-6"> 6"(?) All U.S.A.

  • Powers Lake, Wisconsin, United States
  • May 24th
Destaco Hold Down Clamp #858-LC

Destaco Hold Down Clamp #858-LC

  • National City, California, United States
  • May 24th
Set of 5 Toggle Clamps Sheet Metal Holding Aircraft Tools

Set of 5 Toggle Clamps Sheet Metal Holding Aircraft Tools

  • Cold Brook, New York, United States
  • May 24th
clamp earth 300 amp medalist

clamp earth 300 amp medalist

  • Glebe, NSW, Australia
  • May 24th
machinest vice 3 inc by 7 in

machinest vice 3 inc by 7 in

  • Farmingdale, New York, United States
  • May 24th
Crosby McKissick 419 15-Ton Lifting Rigging Snatch Block ,Shackle, Hooks

Crosby McKissick 419 15-Ton Lifting Rigging Snatch Block ,Shackle, Hooks

  • Golden Valley, Arizona, United States
  • May 24th
1Pcs 30Kg Vertical Toggle Clamp Metal Hand Tool Holding Capacity GH-13009 BDRA

1Pcs 30Kg Vertical Toggle Clamp Metal Hand Tool Holding Capacity GH-13009 BDRA

  • Shenzhen, China
  • Jun 29th
Vintage ~ Clamp Mfg Co. ~ Kant-Twist #421 Clamp ~ 6 Deep ~ So El Monte, CA

Vintage ~ Clamp Mfg Co. ~ Kant-Twist #421 Clamp ~ 6 Deep ~ So El Monte, CA

  • Williamston, South Carolina, United States
  • Jun 29th
JH Williams 6" C Clamp #406 Drop Forged Deep Throat

JH Williams 6" C Clamp #406 Drop Forged Deep Throat

  • Youngstown, Ohio, United States
  • Jun 28th
Monogram Plier Tool For Clamps Used In Aerospace Aviation

Monogram Plier Tool For Clamps Used In Aerospace Aviation

  • Catlin, Illinois, United States
  • Jun 28th

People who viewed this item also vieved

3 LATHE DEAD CENTERS LARGE 11" OVERALL LEGNTH

3 LATHE DEAD CENTERS LARGE 11" OVERALL LEGNTH

  • Beltsville, Maryland, United States
  • Jan 30th
READY-TOOL 250-TR LATHE LIVE CENTER,#5 MORSE TAPER used

READY-TOOL 250-TR LATHE LIVE CENTER,#5 MORSE TAPER used

  • Beltsville, Maryland, United States
  • Jan 30th
Carbide Tipped Dead Center - Jarno Taper (Inv.24271)

Carbide Tipped Dead Center - Jarno Taper (Inv.24271)

  • Portland, Connecticut, United States
  • Jan 30th
Self-Ejecting Square Chuck Key Mounting Plates 1/2"

Self-Ejecting Square Chuck Key Mounting Plates 1/2"

  • San Gabriel, California, United States
  • Jan 30th
Self-Ejecting Square Chuck Key Mounting Plates 5/16"

Self-Ejecting Square Chuck Key Mounting Plates 5/16"

  • San Gabriel, California, United States
  • Jan 30th
MACHINIST LATHE TOOL LOT OF 2 JACOBS CHUCKS #6A & #34-06

MACHINIST LATHE TOOL LOT OF 2 JACOBS CHUCKS #6A & #34-06

  • Lake Hiawatha, New Jersey, United States
  • Jan 30th
TG100 COLLETS 11/32 & 29/64", Qty 2 TG100 COLLET ,ERICKSON/kennametal

TG100 COLLETS 11/32 & 29/64", Qty 2 TG100 COLLET ,ERICKSON/kennametal

  • Wethersfield, Connecticut, United States
  • Jan 30th
Hardinge B20 Feed Finger Pads 5/8" Round

Hardinge B20 Feed Finger Pads 5/8" Round

  • Hendersonville, Tennessee, United States
  • Jan 30th
Hardinge B20 Feed Finger Pads 13/16" Round

Hardinge B20 Feed Finger Pads 13/16" Round

  • Hendersonville, Tennessee, United States
  • Jan 30th
(2) 10" X 12" "T"-SLOTTED SWIVELING ANGLE PLATES - #26666

(2) 10" X 12" "T"-SLOTTED SWIVELING ANGLE PLATES - #26666

  • Cincinnati, Ohio, United States
  • Jan 30th
TOOL POSITIONER ADJUSTABLE TILT TRIANGLE BASE

TOOL POSITIONER ADJUSTABLE TILT TRIANGLE BASE

  • Minneapolis, Minnesota, United States
  • Jan 30th
HEALD RED HEAD GRINDING SPINDLE UNIT # 3728 TYPE - 17-1B

HEALD RED HEAD GRINDING SPINDLE UNIT # 3728 TYPE - 17-1B

  • Rochester, Michigan, United States
  • Jan 30th
Workholder Toolholder

Workholder Toolholder

  • Peoria, Illinois, United States
  • Jan 30th
RC Machine 700 End Effect Finger

RC Machine 700 End Effect Finger

  • Peoria, Illinois, United States
  • Jan 30th
Set of 2 UU444 Brass Jaws

Set of 2 UU444 Brass Jaws

  • Peoria, Illinois, United States
  • Jan 30th
MITEE BITE Replacement Talon Grip

MITEE BITE Replacement Talon Grip

  • Flushing, New York, United States
  • Jan 30th
Kurt D60-7-MAG 6" Magnetic Jaw Plate

Kurt D60-7-MAG 6" Magnetic Jaw Plate

  • Sarasota, Florida, United States
  • Jan 30th
Kurt D60-315-MAG 6" Groove Magnetic Jaw Plate

Kurt D60-315-MAG 6" Groove Magnetic Jaw Plate

  • Sarasota, Florida, United States
  • Jan 30th
GAGE BLOCKS TOOLMAKER MADE USED MACHINIST TOOLMAKER INSPECT LATHE GRINDER MILL

GAGE BLOCKS TOOLMAKER MADE USED MACHINIST TOOLMAKER INSPECT LATHE GRINDER MILL

  • Milwaukee, Wisconsin, United States
  • Feb 27th
TMX 0 to 60° Precision Graduated Angle Block | (40B)

TMX 0 to 60° Precision Graduated Angle Block | (40B)

  • Prescott, Arizona, United States
  • Feb 27th
T J S HBA6000-1 Head Block Assembly - NEW

T J S HBA6000-1 Head Block Assembly - NEW

  • Peoria, Illinois, United States
  • Feb 27th
Tormach 4 Jaw Chuck for 8" Rotary Table 30293

Tormach 4 Jaw Chuck for 8" Rotary Table 30293

  • Stafford, Virginia, United States
  • Mar 1st
Tormach 3 Jaw Chuck Set for 8" Rotary Table

Tormach 3 Jaw Chuck Set for 8" Rotary Table

  • Stafford, Virginia, United States
  • Mar 1st
Craftsman 8-inch Rotary Milling Table 0871-56

Craftsman 8-inch Rotary Milling Table 0871-56

  • Hillsdale, New Jersey, United States
  • Mar 2nd
Jacobs 96-F1 Rubber Flex collet chuck w/ wrench for lathe mill, etc FREE SHIP!

Jacobs 96-F1 Rubber Flex collet chuck w/ wrench for lathe mill, etc FREE SHIP!

  • Lebanon, Pennsylvania, United States
  • Mar 3rd
KOMET ABS 80 UB8701210 6-BLADE PRECISION TOOL HOLDER

KOMET ABS 80 UB8701210 6-BLADE PRECISION TOOL HOLDER

  • Des Moines, Iowa, United States
  • Mar 3rd
(NIB) Kennametal Chuck Collet (ER 25) KM63XMZER2560Y

(NIB) Kennametal Chuck Collet (ER 25) KM63XMZER2560Y

  • Elmira, New York, United States
  • Mar 3rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies