+ Post new Ad
Atlas Craftsman lathe 9-70 9-73 change gear bushing and sleeve assy 3 SETS, US $75.00 – Picture 0
Atlas Craftsman lathe 9-70 9-73 change gear bushing and sleeve assy 3 SETS, US $75.00 – Picture 0

Atlas Craftsman Lathe 9-70 9-73 Change Gear Bushing And Sleeve Assy 3 Sets

US $75.00

  • Hemet, California, United States
  • Feb 13th
Open on mobile:
QR code
Each set contains: 9-70 bushing 9-73 sleeve bolt washer nut This listing is for ALL THREE SETS. All three sets are used and have typical wear, but are ready to use and 100% functional. I used them myself on my 10" Atlas lathe that I am parting out. The gears slide on and off them easily, I have already filed down any burs and made them 100% functional and easy to use. Note! Two of the sets have original Atlas 9-69 bolts. The third has a hardware store carriage bolt instead. It works fine. I believe the Atlas lathe was designed to use standard carriage bolts. The square part fits the Atlas banjo bracket fine. You will probably want to cut it a bit shorter though. I am not sure if the washers and nuts are original or hardware store or not. I dont think it matters. They all work fine.

Directions

Similar products from Sleeves

DODGE 113608 DYNA SYNC PULLEY SIZE NO. TL20H100 BUSH REG 1210 (QTY 1) #57677

DODGE 113608 DYNA SYNC PULLEY SIZE NO. TL20H100 BUSH REG 1210 (QTY 1) #57677

  • Resaca, Georgia, United States
  • Feb 13th
SDS Max Bushing Tool 1 3/4 x 7

SDS Max Bushing Tool 1 3/4 x 7

  • Venice, Florida, United States
  • Feb 13th
CNC Lathe Tool Holder Bushing

CNC Lathe Tool Holder Bushing

  • Canton, Michigan, United States
  • Feb 13th
CNC Lathe Tool Holder

CNC Lathe Tool Holder

  • Canton, Michigan, United States
  • Feb 13th
NEW NO NAME BUSHING H315X207 KM15

NEW NO NAME BUSHING H315X207 KM15

  • Clover, South Carolina, United States
  • Feb 13th
LOT 2 ASSORTED SHX 7/8 AGK D1

LOT 2 ASSORTED SHX 7/8 AGK D1

  • Bridgeview, Illinois, United States
  • Feb 13th
BROWNING SPLIT TAPER BUSHING - Q1 1 15/16

BROWNING SPLIT TAPER BUSHING - Q1 1 15/16

  • Bridgeview, Illinois, United States
  • Feb 13th
DODGE TAPER LOCK BUSHING PART# 2517 SIZE 3/4"

DODGE TAPER LOCK BUSHING PART# 2517 SIZE 3/4"

  • Bridgeview, Illinois, United States
  • Feb 13th
ORIG ATLAS CRAFTSMAN 10/12" LATHE HEADSTOCK HINGE PIN & BRACKETS 10-82 10-133R L

ORIG ATLAS CRAFTSMAN 10/12" LATHE HEADSTOCK HINGE PIN & BRACKETS 10-82 10-133R L

  • Holmdel, New Jersey, United States
  • Feb 13th
NEW MASKA SFX1-7/8 BUSHING SFX178

NEW MASKA SFX1-7/8 BUSHING SFX178

  • Cleveland, Ohio, United States
  • Feb 13th
AVIATION AIRCRAFT TOOLS LOT SHEET METAL DRILL RIVET CHUCK JACOBS 5/32 3/8 -24

AVIATION AIRCRAFT TOOLS LOT SHEET METAL DRILL RIVET CHUCK JACOBS 5/32 3/8 -24

  • West Palm Beach, Florida, United States
  • Feb 13th
NEW LOT OF 2 TAPER LOCK BUSHINGS 2517 2 7/16" SEE PHOTOS FREE SHIPPING!!!

NEW LOT OF 2 TAPER LOCK BUSHINGS 2517 2 7/16" SEE PHOTOS FREE SHIPPING!!!

  • South Fork, Pennsylvania, United States
  • Feb 13th
New In box, Dayton 4JU42 Quick Detachable Bushing, Bore Size 3/4

New In box, Dayton 4JU42 Quick Detachable Bushing, Bore Size 3/4

  • Fairmount, Georgia, United States
  • Feb 13th
NEW LOT OF 3 TAPER LOCK BUSHINGS 2517 2 7/16" WITH SCREWS FREE SHIPPING SEE PICS

NEW LOT OF 3 TAPER LOCK BUSHINGS 2517 2 7/16" WITH SCREWS FREE SHIPPING SEE PICS

  • South Fork, Pennsylvania, United States
  • Feb 13th
NEW Browning H Series Malleable Split Taper Bushing 1-7/16" Bore

NEW Browning H Series Malleable Split Taper Bushing 1-7/16" Bore

  • Fairmount, Georgia, United States
  • Feb 13th
BROWNING RS5H SLEEVE COUPLING OUTSIDE DIAMETER 4-11/16"

BROWNING RS5H SLEEVE COUPLING OUTSIDE DIAMETER 4-11/16"

  • Alexandria, Virginia, United States
  • Feb 13th
NEW Browning B Series Split Taper Ductile Bushing 1-1/4" Bore

NEW Browning B Series Split Taper Ductile Bushing 1-1/4" Bore

  • Fairmount, Georgia, United States
  • Feb 13th
1 MORSE TAPER ID x 1" OD TOOL HOLDER BUSHING drill turret lathe mill cnc socket

1 MORSE TAPER ID x 1" OD TOOL HOLDER BUSHING drill turret lathe mill cnc socket

  • Milroy, Indiana, United States
  • Feb 13th
3 MORSE TAPER ID x 1 1/4" OD TOOL HOLDER BUSHING drill turret lathe cnc socket

3 MORSE TAPER ID x 1 1/4" OD TOOL HOLDER BUSHING drill turret lathe cnc socket

  • Milroy, Indiana, United States
  • Feb 13th
4 MORSE TAPER ID x 1 1/2" OD TOOL HOLDER BUSHING drill turret lathe cnc socket

4 MORSE TAPER ID x 1 1/2" OD TOOL HOLDER BUSHING drill turret lathe cnc socket

  • Milroy, Indiana, United States
  • Feb 13th

People who viewed this item also vieved

TOOL !

TOOL !

  • El Monte, California, United States
  • Feb 13th
TOOL !

TOOL !

  • El Monte, California, United States
  • Feb 13th
MORI SEIKI Lathe Boring Bar Drill Holder .95"

MORI SEIKI Lathe Boring Bar Drill Holder .95"

  • Melrose Park, Illinois, United States
  • Feb 21st
BORITE 1/2" X 3" TT 221 C5 BORING BAR w/11 INSERTS

BORITE 1/2" X 3" TT 221 C5 BORING BAR w/11 INSERTS

  • Fort Myers, Florida, United States
  • Feb 21st
Widia 1.216.56.323.00 + 10 pcs. XOMT 070304-34 TN7015 Carbide Inserts

Widia 1.216.56.323.00 + 10 pcs. XOMT 070304-34 TN7015 Carbide Inserts

  • Schweinfurt,Bayern, Germany, Germany
  • Feb 27th
Widia 1.216.56.225.00 + 10 pcs. XOMT 09T306-34 TN7015 Carbide Inserts

Widia 1.216.56.225.00 + 10 pcs. XOMT 09T306-34 TN7015 Carbide Inserts

  • Schweinfurt,Bayern, Germany, Germany
  • Feb 27th
LOT OF 3 INGERSOLL HSK SCREW-IN HOLDERS

LOT OF 3 INGERSOLL HSK SCREW-IN HOLDERS

  • Salem, Ohio, United States
  • Mar 1st
Dake Model 001 Bench Arbor Press 1 Ton USA

Dake Model 001 Bench Arbor Press 1 Ton USA

  • Decatur, Illinois, United States
  • Mar 1st
Daewoo Puma 2000SY CNC O.D. Tool Holder, Used

Daewoo Puma 2000SY CNC O.D. Tool Holder, Used

  • West Babylon, New York, United States
  • Mar 3rd
Citizen ADT 316L Fixed BW Toolholder for F-20/25 machines, Used

Citizen ADT 316L Fixed BW Toolholder for F-20/25 machines, Used

  • West Babylon, New York, United States
  • Mar 3rd
1-3/8" HEX HARDINGE INDEX B42 COLLET

1-3/8" HEX HARDINGE INDEX B42 COLLET

  • Cleveland, Ohio, United States
  • Mar 5th
1-1/4" HEX HARDINGE INDEX B42 COLLET

1-1/4" HEX HARDINGE INDEX B42 COLLET

  • Cleveland, Ohio, United States
  • Mar 5th
HD YAMA HEAVY DUTY DRILL CHUCK 1-13mm (0 - 1/2") JT6 new IN ORIGINAL Box

HD YAMA HEAVY DUTY DRILL CHUCK 1-13mm (0 - 1/2") JT6 new IN ORIGINAL Box

  • Schofield, Wisconsin, United States
  • May 18th
ALBRECHT 0.6-7.4 mm Keyless Drill Chuck Germany tool micro press lathe mill

ALBRECHT 0.6-7.4 mm Keyless Drill Chuck Germany tool micro press lathe mill

  • Windsor, Virginia, United States
  • May 18th
ALORIS BXA 8 Theading Tool Holder & P-6 Threading Blade Cutter Loc: A 4

ALORIS BXA 8 Theading Tool Holder & P-6 Threading Blade Cutter Loc: A 4

  • Brookings, Oregon, United States
  • Jun 25th
Enco 60 A Quick Change Tool Post Holder

Enco 60 A Quick Change Tool Post Holder

  • Garden City, Idaho, United States
  • Jun 26th
12" Spindle with 20 Segment hubs and steel brushes overall diameter 8" .

12" Spindle with 20 Segment hubs and steel brushes overall diameter 8" .

  • Highland, Michigan, United States
  • May 28th
4" spindle with steel brushes, spindle has a 3/4" bore with set screw for your m

4" spindle with steel brushes, spindle has a 3/4" bore with set screw for your m

  • Highland, Michigan, United States
  • May 28th
Sunnen CR 1750 Connecting Rod Reconditioning Mandrel: Wedges, Shoes Stone

Sunnen CR 1750 Connecting Rod Reconditioning Mandrel: Wedges, Shoes Stone

  • Scottsdale, Arizona, United States
  • May 29th
SUNNEN Hone Mandrel 2G-P28-1250WB

SUNNEN Hone Mandrel 2G-P28-1250WB

  • Halls, Tennessee, United States
  • May 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies