Atten At5030 Spectrum Analyzer New Frequency Range 0.15-3000mhz Meter Tester

US $1,860.89

  • Shanghai, China
  • Jan 29th
ATTEN AT5030 SPECTRUM ANALYZER NEW FREQUENCY RANGE 0.15-3000MHZ METER TESTER ADSL2+ ST332B DIGITAL TESTER LINE ADSL WAN&LAN NETWORK METER READSL ADSL2 XDSL SL-5868P GAUGE LEVEL METER DECIBEL MEMORY SOUND/NOISE 30~130DB TESTER LANDTEK NONCONTACT INFRARED TEMP IR THERMOMETER GM550 TESTER(-58~1022?F) TEMPERATURE TESTER DB BRAND NEW NOISE LEVEL MEASURE SOUND METER SMART SENSOR AR824 GAUGE AT5030 Spectrum Analyzer is a low cost, high performance digital synthesized and frequency-scanning and super heterodyne RF measurement instrument with frequency up to 3 GHz. These advanced features tunes within the frequency range by electro scanning and the frequency ponderance of its spectrum will be sampled according to the time. Therefore, the scanning and tuning spectrum analyzer can display the cycle signal and random signal. In AT5030, there are kinescope and separately-packaged equipment, which are exported. AT5030 can test the signal with the range 0.15 ~ 3000MHz. And the center frequency can be adjusted through slightly tuning and roughly, which can form a sample measurement of frequency, with 100KHz/case ~ 100MHz/case added. A 4-and-half digits display can be chosen as center frequency or marked frequency reading. The Spectrum Analyzer AT5030 can carry out good inspection of the faults of cable system and wireless system including remote control, cordless phones, cable TV and communication equipment as well as good comparison and analysis of frequency of signals. Features: 4 KHz video filter. Compact and Easy to be carry. Excellent Noise floor performance. -100~+13dbm amplitude range, 20KHz, 400KHz. 4 and half Digital display (center frequency, 0.1MHz resolvability). Frequency range : 0.15~3000MHz (detailed ranges: 0.15 1000 MHz; 1000MHz 2000MHz; 2000MHz 3000MHz). Applications: Locate sources of EMI. Measure unwanted RF radiation. Test master antenna TV systems. Educational Training Institutions. Test cable TV levels and frequency response. Measure communications transmitter spurious radiation. Parameters: Frequency range 0.15 3000MHz(details ranges: 0.15 1000MHz;1000MHz 2000MHz; 2000MHz 3000MHz) Display accuracy of center frequency ±2% x spectrum width + 5 x 10-3* center frequency 100KHz Mark accuracy ±0.1% frequency width +100KHz Frequency display resolution 100KHz(4 and a half LED) Scanning-frequency width 100KHz/case~100MHz/case and level1.2.5.0Hz/case(0 scanning) Accuracy ±10% Frequency stability better than 150KHz/h Middle-frequency(-3dB) 20KHz;400KHz, video filter(pass);4KHz Scanning Velocity 43Hz Scope Range -100~+13dBm Screen display range 80dB(10dB/case) Reference level of electricity -27dBm~+13dBm Average noise level of electricity -90dBm(bandwidth 20KHz) Tortiontwice three times wave
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Atten
Country of Manufacture China
Model AT5030

Directions

Similar products from Radiation Dose Meters & Detectors

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies