Autoclave Tuttnauer 2540e Sterilizer 120volt Tattoo Dental Veterinary Salon

US $2700

Saint Petersburg, Florida, United States
Jun 9th

Open on mobile:
QR code

This is a used Tuttnauer 2540E 120Volt autoclave that has been cleaned, calibrated, and tested. We received it non working conditioning and diagnosed it and repaired it. The unit is running in some of the pictures so you can see it up to temperature. I cleaned out the reservoir and chamber and inspected all wiring connections. It is in great working condition and comes with tray rack, and 2 trays, and drain tube. Another tray can be ordered for you by a medical dealer. The outside of the unit looks ok but you can see some wear on it. Our Process: We repair autoclave of almost all types, makes, and models. In effect of doing this we run into a lot of working and non working units. Some of these units become parts machines and some are what we call rebuild able cores. The good rebuild able cores are usually more rare as most doctors will use the unit to about its max. We diagnose every unit that comes in the door. We then deem it to be one of the other. The ones that are rebuild able are repaired and then we replace the parts that fail the most frequently. We open up and clean out all the solenoids, valves, check all the wiring, and connections to make sure their is no corrosion or debris that may make the units fail. Once the repair of the unit is done we move on to testing. All repaired units are then tested extensively (15 cycles at least). If there is one failure in any of the cycles we send the unit back and it starts the entire process over. When a unit finishes testing and checks out good then it is pictured and listed on eBay. Once a purchase is made and payment is received we pull the unit down and run complete cycles for the entire day. With dry time included each cycle is about an hour long, so it gets tested about 8 more times. This Tuttnauer autoclave is a tried and true workhorse. The roomy chamber makes it ideal for the active medical clinic, industrial lab, dental practice, veterinary facility, nail salon or tattoo shop. The stainless steel chamber is great for sterilizing liquids, media, instruments, glassware, soil or waste products. This unit is completely refurbished and ready to ship. The cosmetic condition is also excellent. AWESOME CONDITION UNIT HAS BEEN FULLY CLEANED NEW SEALS AN GASKETS NEW POWER CORD NEW POWER SWITCH NEW RESERVOIR COVER LEVELING FEET ALL NEW WIRING AND ELECTRICAL CONNECTIONS CONDENSER COIL RUNS PERFECT FRESH PAINT Guaranteed Working When Received Overall Size: Width: 20" (50.8 cm) Length: 21-1/2" (54.6 cm) Height: 14-3/8" (36.5 cm) Chamber Size: Diameter: 10" (25.4 cm) Length: 18-3/4" (47.6 cm) Tray Size: Width: 6.7" (17 cm) Length: 16.3" (41.4 cm) Height: 0.8" (2 cm) Unit Weight: 80 lbs (36.3 kg) Cycle time: Cold start: 30 minutes Warm start: 14 minutes Electrical: 120 volts, 1400 Watts, 50/60 Hz, 12 Amps "Ready To Be Put To Work" The next day it is packaged and shipped out. All units will ship no later then 3 days of receiving payment but in most cases it is in 2 days. We ship anywhere in the continental United States. If you have any questions or if you are in need of repairs for an autoclave please contact us at 727-644-3331. "Over 20 years in Autoclave and Dental repair" ClaveDynasty LLC "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."