Automatic Rebar Tier Tying Machine Strapping Computer Includes 2 Batteries

US $128.00

West Covina, California, United States
Aug 27th

Open on mobile:
QR code

Automatic Rebar Tier Tying Machine Strapping Computer includes 2 Batteries. Description More information Contact seller! Specifications： Material: Plastic + Metal Voltage: 12V Battery: Lithium Ion Batteries Battery Capacity: 1500 mAh Battery Charging Time: 1.5 hours full filling Tying Wire Diameter: 0.8mm Tying Wire Length: more than 110 m Applicable Scope Of Steel Strapping: 8mm - 34mm Knot Wire Length: 300 - 500mm Knot Number Per Charge: 1500 times Knot The Required Time: 0.8 seconds at a time Machine Size: 275 mm * 65 mm * 240 mm / 10.83''x2.56''x9.45''(appr.) Tying Wire Installations： 1. In the state of start-up, press the locking plate of the opening wire plate, open the plate cover. 2. Take out the tying wire, tear the packaging film, pull straight wire head about 10 cm, load into the binding machine in the clockwise direction, the wire head into the guide tap tube. Note: Clench the wire plate when tear the packaging film, do not let the wire loose. If the wire is free to disperse, it will lead to the spread of the wire stuck in the wire plate. 3. Insert the head of the wire guide into the tap pipe until it is resisted. 4. Cover the plate and fasten the locking piece. 5. Pinch the wire forward with two fingers, press and hold the switch and send the wire out. Operating Skills： 1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding. 2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Battery Charging Time	1.5 hours full filling
Type	Rebar Tier
Tool Type	Rebar Tier
Battery Capacity	4500 mAh
Tying Wire Diameter	0.8 mm
Knot Number Per Charge	1500 times
Material	Plastic + Metal
Voltage	12V
MPN	Does Not Apply
Battery	Lithium Ion Batteries
Machine Size	275 mm * 65 mm * 240 mm / 10.83''x2.56''x9.45''(ap
Tying Wire Length	more than 110 m
Knot Wire Length	300 - 500mm
Model	Handheld Rebar Tier Tool
Brand	Unbranded
Knot The Required Time	0.8 seconds at a time
Applicable Scope of Steel Strapping	8mm - 34mm
Shipping Notice	Can not ship to Puerto Rico,Alaska/Hawaii
UPC	Does not apply