BALESTRINI MICRON SLOT MORTISER, US $7,800.00 – Picture 0

BALESTRINI MICRON SLOT MORTISER, US $7,800.00 – Picture 1

BALESTRINI MICRON SLOT MORTISER, US $7,800.00 – Picture 2

BALESTRINI MICRON SLOT MORTISER, US $7,800.00 – Picture 3

BALESTRINI MICRON SLOT MORTISER, US $7,800.00 – Picture 4

BALESTRINI MICRON SLOT MORTISER, US $7,800.00 – Picture 5

BALESTRINI MICRON SLOT MORTISER, US $7,800.00 – Picture 6

BALESTRINI MICRON SLOT MORTISER, US $7,800.00 – Picture 7

BALESTRINI MICRON SLOT MORTISER, US $7,800.00 – Picture 8

Balestrini Micron Slot Mortiser

US $7,800.00

Naperville, Illinois, United States
Mar 6th

Open on mobile:
QR code

HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999 ________________________________________________________________________________________________________________________________________<> BALESTRINI MICRON SLOT MORTISER This is a very clean, very smooth running, Balestrini Micron that comes from a smaller custom shop. It has been cleaned and checked and is fully operational. We can very easily rate this one in Excellent condition both mechanically and cosmetically. Mortiser twin table design with (1) spindle per side. Spindle has variable speed on oscillation stroke. Tables have air over oil variable speed feed rate. (1) pneumatic hold down clamp per table. 3 HP spindle motor producing a spindle speed of 9,000 RPM. (1) HP oscillation motor, oscillating speeds of 120 to 240 strokes/min. Max. length of stroke – 4.72? Max. depth of mortiser – 3.14? Max. bit diameter – 30 mm. Tables tilt left or right 20?s. Hourly production is 500 to 800 slots _________________________________________________________________________________________________________________________________________ Terms & Conditions: 1.) Please ask all questions before bidding. 2.) Winning bidder will pay actual freight charges. We do not make money off of freight, insurance, packaging, or crating. We will be glad to get you a freight quote. We also offer third party insurance to insure that freight is covered if damaged in transit at a cost of $40 per $10,000 of coverage 3.) Please call (630-229-6705) or email (info@360degreemachinery.com) us for full freight options. There will be an additional $75 crating charge on this item if shipped common carrier to protect against theft and damage. 4.) Illinois transactions must add 7.25% sales tax unless tax exempt. 5.) Please email your zip code and if it's shipping to a business with a dock or forklift OR if it's shipping to a residence and we will be glad to quote you on our low cost freight options. We charge exactly what we pay with zero mark up. We also have third party insurance available at a rate of $40 per $10,000 to protect against freight loss/damage