+ Post new Ad
Bar/Band Bending Arbor Press, US $22638 – Picture 0
Bar/Band Bending Arbor Press, US $22638 – Picture 1
Bar/Band Bending Arbor Press, US $22638 – Picture 0
Bar/Band Bending Arbor Press, US $22638 – Picture 1

Bar/band Bending Arbor Press

US $22638

  • Avon, Indiana, United States
  • Mar 9th
Open on mobile:
QR code
Rare old, but in excellent condition, metal bar and band bending arbor press. Using the inside rollers, the completed angle is about 100 degrees for a .125" x 1.5" wide aluminum band with an approx. .500" radius. The outside bars will provide just over 50 degrees. Band stock up to 4" wide by up to approx. .1875" thickness in aluminum can also be hand formed using the front bending rod. I am not sure how thick a piece of sheet steel can be formed, likely 1/8", or so. The hole in the back at top is threaded to allow for a stop bolt for more precise bending repeatability. Unit comes with two hardened steel rollers and two Nylon (I believe) roller inserts. The removable steel rollers are .750" and the Nylon rollers are approximately .722". The permanent press roller is .500" hardened steel.This device was originally sold and used in the orthopedic brace profession back in the days following the U.S. polio epidemic. It is not often seen anymore, but is still a very useful bending tool for bar and small band bending projects. The rollers are not equidistant from the press roller, but I have never found this to be an issue. There may be a reason for this. I don't know.

Directions

Similar products from Tools for Fabrication Equipment

SHEET METAL SHEAR - 8 FOOT SHEETS UP TO 3/16TH THICKNESS

SHEET METAL SHEAR - 8 FOOT SHEETS UP TO 3/16TH THICKNESS

  • Douglas, Georgia, United States
  • Mar 10th
Hydraulic Press Brake Accurpress

Hydraulic Press Brake Accurpress

  • Canutillo, Texas, United States
  • Mar 10th
Waterbury Farrel thread roller #40 4 5/8 pocket

Waterbury Farrel thread roller #40 4 5/8 pocket

  • Delano, California, United States
  • Mar 10th
Chicago 8-18 Brake, Lockformer, Tennsmith, Pexto, Engel, Sheetmetal, Ductwork

Chicago 8-18 Brake, Lockformer, Tennsmith, Pexto, Engel, Sheetmetal, Ductwork

  • Dracut, Massachusetts, United States
  • Mar 10th
SPELLMACO no. 3-17 set "SPOTTERS" a matched set of transfer punches

SPELLMACO no. 3-17 set "SPOTTERS" a matched set of transfer punches

  • Flat Rock, Michigan, United States
  • Mar 10th
Planishing Hammer Yoke

Planishing Hammer Yoke

  • Cave City, Kentucky, United States
  • Mar 10th
Grizzly Transfer Punch Set "Spotters" #1-60 Set NiB

Grizzly Transfer Punch Set "Spotters" #1-60 Set NiB

  • Bloomfield, New York, United States
  • Mar 10th
28 pcs transfer punch set

28 pcs transfer punch set

  • Centereach, New York, United States
  • Mar 10th
Master-Fab 90Ton x 8ft Hydraulic Press Brake Mdl PAB-90-08, CNC Back Gauge, 15HP

Master-Fab 90Ton x 8ft Hydraulic Press Brake Mdl PAB-90-08, CNC Back Gauge, 15HP

  • Hopkins, Minnesota, United States
  • Mar 9th
Roper Whittney Punch Press

Roper Whittney Punch Press

  • Burbank, California, United States
  • Mar 9th
Esco Mongoose Millhog Tube / Pipe Beveler with Case

Esco Mongoose Millhog Tube / Pipe Beveler with Case

  • Midlothian, Texas, United States
  • Mar 9th
5/32 " NUMBERS Heavy Duty Steel Stamps

5/32 " NUMBERS Heavy Duty Steel Stamps

  • Alamance, North Carolina, United States
  • Mar 9th
Taylor Pneumatic Nibbler T-7711 S/N 4860562

Taylor Pneumatic Nibbler T-7711 S/N 4860562

  • Pensacola, Florida, United States
  • Mar 9th
E.H. Wachs SDB 103 Beveling Facing End Prep Pipe Tool SS Steel Orbital Welding

E.H. Wachs SDB 103 Beveling Facing End Prep Pipe Tool SS Steel Orbital Welding

  • Coatesville, Pennsylvania, United States
  • Mar 9th
MATHEY DEARMAN 2SA PIPE BEVELING BEVELER 6 - 12" #8 <-- GOOD SHAPE

MATHEY DEARMAN 2SA PIPE BEVELING BEVELER 6 - 12" #8 <-- GOOD SHAPE

  • Staten Island, New York, United States
  • Mar 9th
VINTAGE CHALLENGE EYELET GROMMET PRESS #1 SIBLEY LEATHER

VINTAGE CHALLENGE EYELET GROMMET PRESS #1 SIBLEY LEATHER

  • Painesville, Ohio, United States
  • Mar 9th
Cleco gun E-4 and ACAT dril TESTED Strong and light .best riveter on the market.

Cleco gun E-4 and ACAT dril TESTED Strong and light .best riveter on the market.

  • Seguin, Texas, United States
  • Mar 9th
Arbor Press Plates 8&#034;x8&#034;

Arbor Press Plates 8"x8"

  • Athens, Georgia, United States
  • Mar 9th
USED 5&#039; X 10&#039; MAZAK STX510 4KW MK2 LASER

USED 5' X 10' MAZAK STX510 4KW MK2 LASER

  • Kansas City, Missouri, United States
  • Mar 9th
33&#034; CHICAGO DREIS &amp; KRUMP PAN FINGER BRAKE W-33 (8070)

33" CHICAGO DREIS & KRUMP PAN FINGER BRAKE W-33 (8070)

  • Chicago, Illinois, United States
  • Mar 9th

People who viewed this item also vieved

JONES &amp; LAMSON MODEL 22S-23S THREADING DIE HEAD 1-3/4&#034; SHANK

JONES & LAMSON MODEL 22S-23S THREADING DIE HEAD 1-3/4" SHANK

  • Ellington, New York, United States
  • Jan 30th
Acme die head chasers, 1DS, 1/4 x 16 Acme thread, set of 4, nice

Acme die head chasers, 1DS, 1/4 x 16 Acme thread, set of 4, nice

  • Portland, Oregon, United States
  • Jan 30th
Metric die head chasers, 1DS, M18x1.5mm thread, set of 4, nice, imported

Metric die head chasers, 1DS, M18x1.5mm thread, set of 4, nice, imported

  • Portland, Oregon, United States
  • Jan 30th
27.5&#034; Swg 4HP Spdl Clausing BZ40 DRILL PRESS

27.5" Swg 4HP Spdl Clausing BZ40 DRILL PRESS

  • Harrison, New Jersey, United States
  • Jan 30th
30.3&#034; Swg 3HP Spdl Clausing A40RS DRILL PRESS

30.3" Swg 3HP Spdl Clausing A40RS DRILL PRESS

  • Harrison, New Jersey, United States
  • Jan 30th
29&#034; Swg 5.5HP Spdl Clausing BC50VE DRILL PRESS

29" Swg 5.5HP Spdl Clausing BC50VE DRILL PRESS

  • Harrison, New Jersey, United States
  • Jan 30th
3&#034;(80mm)x1&#034;(25mm thicks), 3 pieces of polishing and finishing wool felt wheel

3"(80mm)x1"(25mm thicks), 3 pieces of polishing and finishing wool felt wheel

  • Incheon, default, Korea, South
  • Jan 30th
10pcs Type E120 HSS RH (B20 on E Shaft) Deburring Blades Shaviv EDP #29058

10pcs Type E120 HSS RH (B20 on E Shaft) Deburring Blades Shaviv EDP #29058

  • Seminole, Florida, United States
  • Jan 30th
Cleveland Guest M 380 Lapping Machine 15&#034; Unused

Cleveland Guest M 380 Lapping Machine 15" Unused

  • New Berlin, Wisconsin, United States
  • Jan 30th
3M 00048011331379 (TM) Trizact(TM) CF Cloth Belt 337DC, X Weight, Aluminum

3M 00048011331379 (TM) Trizact(TM) CF Cloth Belt 337DC, X Weight, Aluminum

  • Richmond Hill, New York, United States
  • Jan 30th
3M 85095 Hookit Disc Hand Pad , Hook and Loop, 5&#034; Diameter, Yellow (Pack of 10)

3M 85095 Hookit Disc Hand Pad , Hook and Loop, 5" Diameter, Yellow (Pack of 10)

  • Richmond Hill, New York, United States
  • Jan 30th
3M 051141556567 Stikit Film Disc W/ Tab 375L, Aluminum Oxide, 5&#034; Diameter, P240

3M 051141556567 Stikit Film Disc W/ Tab 375L, Aluminum Oxide, 5" Diameter, P240

  • Richmond Hill, New York, United States
  • Jan 30th
Used Carboloy MTGNR-20-5R Industrial Size Lathe Tool Holder w/Insert

Used Carboloy MTGNR-20-5R Industrial Size Lathe Tool Holder w/Insert

  • Blue Ridge Summit, Pennsylvania, United States
  • Jan 30th
Used Manchester Industrial Lathe Tool Holder 203-112

Used Manchester Industrial Lathe Tool Holder 203-112

  • Blue Ridge Summit, Pennsylvania, United States
  • Jan 30th
Used Manchester Industrial Lathe Tool Holder 203-233

Used Manchester Industrial Lathe Tool Holder 203-233

  • Blue Ridge Summit, Pennsylvania, United States
  • Jan 30th
NMTB40 1&#034; END MILL HOLDER STK1169

NMTB40 1" END MILL HOLDER STK1169

  • Wadley, Alabama, United States
  • Jan 30th
NMTB40 1/2&#034; END MILL HOLDER STK1168

NMTB40 1/2" END MILL HOLDER STK1168

  • Wadley, Alabama, United States
  • Jan 30th
Milling Cutter Endmill 6 Fluke Quinco 1 1/2 &#034;

Milling Cutter Endmill 6 Fluke Quinco 1 1/2 "

  • Hillsville, Virginia, United States
  • Jan 30th
Fellows Tilting Head Gear Shaper (Inv.15673)

Fellows Tilting Head Gear Shaper (Inv.15673)

  • Portland, Connecticut, United States
  • Jan 30th
Flagler High Speed Button Lock Machine

Flagler High Speed Button Lock Machine

  • Ronkonkoma, New York, United States
  • Jan 30th
Malco AV3 Combo Cut Aviation Snips Yellow

Malco AV3 Combo Cut Aviation Snips Yellow

  • La Grange, Kentucky, United States
  • Jan 30th
System 3R EDM 70mm Macro Holder, With Mounting Plate

System 3R EDM 70mm Macro Holder, With Mounting Plate

  • Lake Zurich, Illinois, United States
  • Feb 16th
System 3R EDM 70mm Macro Holder

System 3R EDM 70mm Macro Holder

  • Lake Zurich, Illinois, United States
  • Feb 16th
System 3R EDM 606.1 Alignment Check Ruler

System 3R EDM 606.1 Alignment Check Ruler

  • Lake Zurich, Illinois, United States
  • Feb 16th
NEW TANNEWITZ JAW SET GUIDE R-84 R-84 A R84 R84A

NEW TANNEWITZ JAW SET GUIDE R-84 R-84 A R84 R84A

  • Clover, South Carolina, United States
  • Mar 3rd
9”x 12” Wells Horizontal Band Saw Machine Specs, Very Nice

9”x 12” Wells Horizontal Band Saw Machine Specs, Very Nice

  • Somerville, New Jersey, United States
  • Mar 4th
Doall vertical bandsaw

Doall vertical bandsaw

  • Cement City, Michigan, United States
  • Mar 4th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies